Omega Engineering High Speed Load Cell Interface Card... Bedienungsanleitung

omega.com

e-mail: [email protected]

For latest product manuals:

omegamanual.info

User’s Guide

Shop online at

LCIC-WIM-BEN

High Speed

Load Cell Interface Card

Servicing North America:

U.S.A.: One Omega Drive, P.O. Box 4047

ISO 9001 Certified Stamford, CT 06907-0047

TEL: (203) 359-1660

FAX: (203) 359-7700

e-mail: [email protected]

Canada: 976 Bergar

Laval (Quebec) H7L 5A1, Canada

TEL: (514) 856-6928

FAX: (514) 856-6886

e-mail: [email protected]

For immediate technical or application assistance:

U.S.A. and Canada: Sales Service: 1-800-826-6342/1-800-TC-OMEGA®

Customer Service: 1-800-622-2378/1-800-622-BEST®

Engineering Service: 1-800-872-9436/1-800-USA-WHEN®

Mexico: En Espan˜ol: (001) 203-359-7803

FAX: (001) 203-359-7807

e-mail: [email protected]

[email protected]

Servicing Europe:

Czech Republic: Frystatska 184, 733 01 Karviná, Czech Republic

TEL: +420 (0)59 6311899

FAX: +420 (0)59 6311114

Toll Free: 0800-1-66342

e-mail: [email protected]

Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany

TEL: +49 (0)7056 9398-0

FAX: +49 (0)7056 9398-29

Toll Free in Germany: 0800 639 7678

e-mail: [email protected]

United Kingdom: One Omega Drive, River Bend Technology Centre

ISO 9001 Certified Northbank, Irlam, Manchester

M44 5BD United Kingdom

TEL: +44 (0)161 777 6611

FAX: +44 (0)161 777 6622

Toll Free in United Kingdom: 0800-488-488

e-mail: [email protected]

OMEGAnet®Online Service Internet e-mail

omega.com [email protected]

It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI

regulations that apply. OMEGA is constantly pursuing certification of its products to the European New

Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.

The information contained in this document is believed to be correct, but OMEGA accepts

no liability for any errors it contains, and reserves the right to alter specifications without notice.

WARNING: These products are not designed for use in, and should not be used for, human applications.

Table of Contents

1. Introduction

1.1 General Description

1.2 Typical Applications

2. Installing the board in the PC

3. Utilities

3.1 Setup & Running

3.2 The Calibration Utility

3.2.1 General

3.2.2 The Calibrations Library

3.2.3 Parameters

3.2.4 Calibration Efficiency (CE)

3.3 The Settings Utility

3.3.1 The Menu Bar

3.3.1.1 Tools / Analog Output

3.3.1.2 Tools / Baud Rate for SCI port

3.3.1.3 Tools / General Setpoints

3.3.2 Parameters

3.3.2.1 Communication

3.3.2.1.1 Port

3.3.2.1.2 Baud Rate

3.3.2.1.3 RS485 Address

3.3.2.1.4 Get results immediately

3.3.2.2 Auto Zero

3.3.2.2.1 Activate

3.3.2.2.2 Max Zero

3.3.2.2.3 Min Zero

3.3.2.2.4 Time limit

3.3.2.3 Start Fill-mode

3.3.2.3.1 Fill-mode starts automatically upon card reset

3.3.2.4 Filtering

3.3.2.5 Filling Definition

4. Programming your Application

4.1 Commands

4.2 Parameters

4.3 LCIC-WIM ActiveX

4.3.1 Start/Stop Communication

4.3.2 Variables

4.3.3 Filters

4.3.4 Fast Mode

4.3.5 Misc.

Appendices

A. I/O & the LED Display

A.1 General Notes about the I/O

A.2 Connecting External Devices to the Inputs

A.3 LCIC-WIM I/O & Analog Out

A.4 The LED Display

B. Scaling the Load Cell Input

C. Load Cell Connections

D. USB, RS232 & RS485

D.1 Communication Parameters

D.2 Baud Rate

D.3 General RS232 Terminal

D.4 Serial Communication & PC Power On/Off

D.5 RS485

E. Fill Mode

E.1 Introduction

E.2 Hardware Inputs

E.3 Hardware Outputs

E.4 Filling Parameters

E.4.1 Filling By = Weight

E.4.1.1 Filling by Weight Parameters

E.4.1.2 Auto Tare

E.4.1.3 Valid Results Limits

E.4.1.4 Stabilization Criterion (Tare & Stop)

E.4.1.5 Lazy Filling

E.4.2 Filling By = Time

E.4.2.1 Filling by Time Parameters

E.4.2.2 Stabilization Criterion (Stop)

E.4.3 Fast Speed Config

E.4.4 The Filling Configurations Library

E.5 LED Display Notations

E.6 Commands

E.7 Error Codes

F. Specifications

F.1 Load Cell Input

F.2 A/D

F.3 Digital Inputs

F.4 Digital & Analog Outputs

F.5 Standard Interfaces

F.6 Software

F.7 Dimensions (mm)

F.8 Misc.

G. Trouble-shooting

G.1 Card does not respond after PC power-on

H. Zero & Tare

H.1 The Zero function

H.2 The Auto-Tare function

1. Introduction

1.1 General Description

The model LCIC-WIM is a very High Speed, Intelligent Load Cell

Interface Card with USB/RS232/RS485. Besides its basic mode – named

below as the general mode – the board includes an integral Fill Mode

supplying an independent filling control. The board is intelligent and

powerful enough for OEM customers – it is ready to accept piggy-back

modules and/or embedded applications for OEM special requirements.

1.2 Typical Applications

• Dynamic weighing – vehicles, livestock

• Dynamic force measurement

• High speed checkweighing

• High speed filling / batching

• Beltweighing

• Force measurement / Press Machines

• WIM-Monitor for analysis of dynamic systems

2. Installing the board in the PC

(The following description refers to Windows XP. Obviously, on

another operating system it might be different.)

1. Make sure that all installation files have been copied to your

hard disk to a new folder, say, LCIC-WIM.

2. Connect the LCIC-WIM board to your PC.

3. The ‘Found New Hardware Wizard’ appears.

Select the last option like this:

Click ‘Next’.

4. Select the second option, click ‘Next’ and browse to the

“FTDI - VCP (Virtual COM Port) Driver” folder (under the

folder where you copied the installation files in step 1).

Click ‘Next’.

5. After a while, you’ll have this display:

Click ‘Finish’.

Notes

1. It might occur that the wizard will return to step 3,

requiring to repeat the process. This is normal, just repeat

steps 3-5.

2. You may watch the new driver in ‘Add/Remove programs’:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omega Engineering Aufnahmegeräte Handbücher

Omega Engineering

Omega Engineering Rercorder RD8300 Bedienungsanleitung

Omega Engineering

Omega Engineering RD260A Bedienungsanleitung

Omega Engineering

Omega Engineering OMB-CHARTSCAN 1400 Bedienungsanleitung

Omega Engineering

Omega Engineering DAQ-16 Bedienungsanleitung

Omega Engineering

Omega Engineering OM-51 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch