Omega Lift Equipment MagicLift 25030B Bedienungsanleitung

MagicLift™Hydraulic Service Jack

Model

25030B

25030B-M3_092016

Read this manual and follow all the Safety Rules and Operating Instructions before using this product.

SFA Companies

http://www.omegalift.com

Capacity

3 Ton

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

!WARNING

To avoid crushing and related injuries:

NEVER work on, under or around a

load supported only by a hydraulic

jack. ALWAYS use adequately rated

jack stands.

U.S. Patent Nos. 6,199,379 - 5,946,912

Figure 1 - Service Jack Nomenclature

Handle

Saddle

Lifting Arm

Oil Filler Plug

(ref. Parts illustration

for location)

Caster

Front Wheel

Handle Sleeve

Parts Tray

SPECIFICATIONS

Model Capacity Jack Dimensions (L x W x H) Min. Height Max. Height Saddle Dia.

25030B 3 Ton 27-1/4" x 13-1/4" x 6-3/8" 5-3/4" 19-7/8" 4"

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this

device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics

and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use

and repair of this product may require special skills and knowledge. Instructions and safety information shall be read

to and discussed with the operator in the operator's native language, making sure that the operator comprehends

their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this

device, remove from service immediately.

Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing

parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall

be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an

abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact

distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be

made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.

PRODUCT DESCRIPTION

Hydraulic Service Jack is designed to lift, but not support, one end of a vehicle. Immediately after lifting, loads must be

supported by a pair of appropriately rated jack stands. MagicLift™ service jacks have a unique feature that provides

fast, no load lifts to the jacking point, at which time it lifts in approximately 0.75" ~ 2" increments.

WARNING: Do not use hydraulic jack as stand-alone device. After lifting, immediately support the lifted vehicle

with a pair of appropriately rated jack stands.

PREPARATION/ASSEMBLY

Before Use

1. Before using this product, read the operator's manual completely and familiarize yourself thoroughly with the

product and its components, and recognize the hazards associated with its use.

2. Verify that the product and application are compatible.

3. Assemble the 2-piece handle with provided screws.

4. Always secure the handle into the handle fork by means of the bolt and lock washer provided. Tighten securely

to prevent accidental removal of handle while in use.

WARNING: Do not lift or carry jack by handle. Handle could dislodge and jack fall, resulting in possible injury

or property damage.

5. To familiarize yourself with basic operation, locate and turn the release valve (pump handle):

a. Clockwise until rm resistance is felt to further turning. This is the ‘CLOSED’ release valve position used to

raise the saddle.

b. Counter-clockwise, but no more than 1/2 turn from the closed position. This is the ‘OPEN’ release valve position

used to lower the saddle.

6. With saddle fully lowered and release valve closed, pump the handle. If lift arm responds immediately, jack is

ready for use. If jack does not respond, follow Bleeding/Venting Trapped Air instruction below. Check oil level.

7. Ensure that jack rolls freely. Raise and lower the unloaded saddle throughout the entire lifting range before

putting into service to ensure the pump operates smoothly. Replace worn or damaged parts and assemblies with

authorized replacement parts only.

Bleeding/Venting Trapped Air

With the release valve in the OPEN position (step 5b. above) and with saddle fully lowered, locate and remove the

oil ller plug. Pump handle 6 to 8 full strokes. This will help release pressurized air which may be trapped within

the reservoir. Reinstall the oil ller plug and check operation.

To avoid crushing and related injuries:

• Never work on, under or around a load supported

only by hydraulic jack.

• Always use adequately rated jack stands.

• Chock each unlifted tire in both directions.

• Do not use this device to lift, level, lower, support

nor move a house, mobile home, travel trailer,

camper or any building structure.

• Be alert and sober when using this product. Do

not operate under the inuence of drugs or

alcohol.

!WARNING

• Study, understand, and follow all instructions

before operating this device.

• Do not exceed rated capacity.

• Use only on hard, level surface.

• Lifting device only. Immediately after lifting,

support the vehicle with appropriate means.

• Lift only on areas of the vehicle as specied by

the vehicle manufacturer.

• Do not move or dolly the vehicle while on the

jack.

• No alterations shall be made to this product.

• Failure to heed these markings may result in

personal injury and/or property damage.

OPERATION

Lifting

1. Follow the vehicle manufacturer’s recommended guidelines for lifting. Engage the emergency brake and chock

each unlifted wheel in both directions to prevent inadvertent vehicle movement.

2. Close the release valve by turning the handle clockwise until rm resistance is felt.

3. Refer to the vehicle manufacturer owner’s manual to locate approved lifting points on the vehicle. Center jack

saddle under lift point.

4. Verify lift point, pump handle until saddle contacts lift point. To lift, pump handle until load reaches desired height.

5. Transfer the load to appropriately rated jack stands.

Lowering

WARNING: Clear all tools and personnel before lowering vehicle. Open release valve slowly. The further

the pump handle is turned counter-clockwise, the faster the load will descend. Maintain control of load at all

times.

1. Raise load high enough to clear the jack stands.

2. Remove jack stands carefully.

3. Turn handle counter-clockwise, but no more than 1/2 full turn. If the load fails to lower:

a. Use another jack to raise the vehicle high enough to reinstall jack stands.

b. Remove the malfunctioning jack and then the jack stands.

c. Use the functioning jack to lower the vehicle.

4. After removing jack from under the vehicle, fully lower the saddle to reduce ram exposure to rust and contamination.

MAINTENANCE

NOTICE: Use premium quality hydraulic jack oil. Avoid mixing different types of uid and NEVER use brake uid,

turbine oil, transmission uid, motor oil or glycerin. Improper uid can cause premature failure of the jack and the

potential for sudden and immediate loss of load.

Adding oil

1. With saddle fully lowered set jack in its upright, level position. Remove vent screw.

2. Fill with oil until ~3/16" above the inner cylinder as seen from the oil ller hole. Reinstall vent screw.

Changing oil

For best performance and longest life, replace the complete uid supply at least once per year.

1. With saddle fully lowered, remove vent screw.

2. Lay the jack on its side and drain the uid into a suitable container.

NOTICE: Dispose of hydraulic uid in accordance with local environmental regulations.

3. Fill with oil until ~3/16" above the inner cylinder as seen from the oil filler hole. Reinstall vent screw.

Lubrication

A periodic coating of light lubricating oil to pivot points, axles and hinges will help to prevent rust and assure that

wheels, casters and pump assemblies move freely.

Cleaning

Periodically check the pump piston and ram for signs of rust or corrosion. Clean as needed and wipe with an oily cloth.

NOTICE: Do not use sandpaper or abrasive material on ram and pump piston surfaces.

Storage

When not in use, store the jack with saddle fully lowered.

TROUBLESHOOTING

Symptom Possible Causes Corrective Action

Jack will not lift load • Release valve not tightly closed

• Load is too heavy

• Ensure release valve tightly closed

• Consider higher capacity jack

Jack will lift, but not maintain

pressure

•Release valve not tightly closed

• Hydraulic unit malfunction

•Ensure release valve tightly closed

• Discontinue use, contact Omega

technical service

Jack will not lower after unloading • Reservoir overlled

• Linkages binding

• Fluid level low

• Drain uid to proper level

• Clean and lubricate moving parts

• Ensure proper uid level

Poor lift performance • Fluid level low

•Air trapped in system

• Ensure proper uid level

•Refer to Bleeding/Venting Trapped

Air procedure on page 3

Will not lift to full extension • Fluid level low • Ensure proper uid level

Figure 2 - Replacement Parts Illustration for Model 25030B

REPLACEMENT PARTS

Not all components of the jack are replacement items, but are illustrated as reference for location and position in

the assembly sequence. When ordering parts, please give the Model number, part number and parts description.

Call or write for current pricing: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. e-mail:

[email protected]; Tel: (888) 332-6419; Fax: (816) 891-6599; Website: http://www.omegalift.com

14 20

Replacement Parts List for model 25030B

Item Part No. Description Qty

1 F361-30030-0000 Oil Filler Plug 1

2 G595-30004-0380 Pump Piston 1

3 G489-32000-0000 Release Valve 1

4 1433-00016-204 Snap Ring 16 dia. 2

5 G493-13000-0000 Saddle 1

6 G595-00001-0000 Saddle Pad 1

7 G493-10003-0420 Return Spring 2

8 QG59500-K06 Handle Sleeve Assembly 1

9 1413-00010-204 Lock Washer 1

10 G489-40006-0000 Bolt 1

11 1401-00020-031 Washer 2

12 1433-00020-204 Snap Ring 2

13 QG59500-K03 Front Wheel Assembly 2

14 1413-00020-204 Lock Washer 2

15 G489-20007-0410 Left Handle Sleeve Bolt 1

16 1413-00012-204 Lock Washer 6

17 G489-20006-0410 Hex Bolt 4

18 G489-20005-0410 Right Handle Sleeve Bolt 1

19 G589-20001-0000 Parts Tray 1

20 G93L-20002-0420 Return Spring, Handle Sleeve 1

21 G93M-00002-0410 Hex Screw 2

22 1413-00006-204 Lock Washer 2

23 QG93M00-K05 Handle Assembly 1

24 QG48900-K04 Rear Caster Assembly 2

25 QG59500-K02 Hydraulic Power Unit 1

26 QG59500-K00 Seal Kit (incl. parts 1, A ~ M) -

- 25030B-L0 Label(s) -

- 25030B-M0 Manual -

Seal Kit QG59500-K00 includes:

Item Description Qty

1 Oil Filler Plug 1

A O-ring 2

B O-ring 1

C Back-up Washer 1

D U-cup 1

E Back-up Ring 1

F O-ring 1

G O-ring 1

(**) Replacement requires special skills, knowledge, and equipment. Only an authorized service center may

perform the repair and/or replacement of these items. Contact Omega technical service for list of service

centers.

Item Description Qty

H O-ring 1

I Back-up Washer 1

J O-ring 1

K Back-up Washer 2

L** O-ring 2

M** O-ring 1

SFA Companies

10939 N. Pomona Ave. Kansas City, MO 64153

888-332-6419

[email protected]

ONE YEAR LIMITED WARRANTY

For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option,

without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This

limited warranty is a consumer's exclusive remedy.

Performance of any obligation under this warranty may be obtained by returning the warranted product,

freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153.

Except where such limitations and exclusions are specically prohibited by applicable law, (1) THE

CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE

PRODUCTS AS DESCRIBED ABOVE. (2) SFA COMPANIES SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL

OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS

PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER,

AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION,

ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND

IS NOT COVERED BY THIS WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not

apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also

have other rights, which vary from state to state.

Cric hydraulique pour entretien

MagicLiftMC

Modèle

25030B

Lisez ce manuel et observez toutes les consignes de sécurité et d'utilisation avant d'utiliser ce produit.

SFA Companies

http://www.omegalift.com.

Capacité

2 721 kg

(3 tonnes américaines)

Brevets américains n° 6 199 379 et 5 946 912

Voici le symbole signalant un danger pour la sécurité. Il est utilisé pour vous alerter des

dangers potentiels de blessures. Respectez tous les messages de sécurité qui suivent ce

symbole an d’éviter les blessures et la mort.

!MISE EN GARDE

Pour éviter un écrasement et les blessures en lien avec celui-ci :

Ne travaillez JAMAIS autour d'une charge, en dessous d'elle ou

sur celle-ci, si elle est supportée seulement par un cric hydraulique.

Utilisez TOUJOURS une paire de béquilles de cric dont la capacité

nominale est adéquate.

Figure 1 : Composants d'un cric pour entretien

Poignée Point d'appui

Bras de levage

Bouchon de remplissage d'huile

(Consultez le dessin des pièces

pour son emplacement)

Galet

Roue avant

Douille de la poignée

Plateau à pièces

SPÉCIFICATIONS

Modèle Capacité Dimensions du cric (L x l x H) Hauteur min. Hauteur max. Diamètre du

point d'appui

25030B 2 721 kg

(3 tonnes)

69,22 x 33,66 x 16,19 cm

(27-1/4 x 13-1/4 x 6-3/8 po)

14,61 cm

(5-3/4 po)

50,40 cm

(19-7/8 po)

10,16 cm

(4 po)

INFORMATIONS GÉNÉRALES ET INFORMATIONS RELATIVES À LA

SÉCURITÉ

Conservez ces instructions. Pour votre sécurité, lisez, comprenez et respectez toutes les consignes fournies

avec ce produit ou se trouvant sur celui-ci avant de l'utiliser. Le propriétaire, ainsi que l'utilisateur, doit comprendre

le fonctionnement du produit, ses caractéristiques de fonctionnement et les consignes de sécurité associées à son

utilisation avant de s'en servir. Ces personnes doivent aussi savoir que, pour utiliser ou réparer ce produit, il peut être

nécessaire d'avoir des connaissances ou des habiletés spéciales. Avant que l'utilisation de ce produit ne soit autorisée,

il faut lire, dans la langue maternelle de l'opérateur, les instructions et les informations relatives à la sécurité pour

qu'il en prenne connaissance et discuter de celles-ci avec lui, de manière à s'assurer qu'il les comprend. S'il y a des

doutes quant à la façon adéquate et sécuritaire de se servir du produit, il faut en cesser l'utilisation immédiatement.

Inspectez avant chaque utilisation. N'utilisez pas ce produit s'il est dans un état anormal, comme lorsqu'il y a des

soudures ssurées, des dommages ou des pièces manquantes ou mal xées. Tout équipement qui semble être

endommagé d'une quelconque façon, est usé ou fonctionne de manière anormale ne doit plus être utilisé jusqu'à

ce qu'il soit réparé. Si le produit a été soumis ou s'il y a des raisons de croire qu'il a été soumis à une charge ou à

un choc anormal, cessez de l'utiliser immédiatement jusqu'à ce qu'il soit inspecté à un centre de réparation autorisé

par le fabricant (communiquez avec le distributeur ou le fabricant pour avoir une liste des endroits autorisés). Il

est recommandé qu'une inspection annuelle soit faite à un centre autorisé. Il est possible de se procurer d'autres

étiquettes et d'autres manuels auprès du fabricant.

DESCRIPTION DU PRODUIT

Le cric hydraulique pour entretien est conçu pour soulever, et non supporter, une extrémité de véhicule. Les charges

doivent être supportées par une paire de béquilles de cric à capacité nominale adéquate immédiatement après le

levage. Les crics pour entretien MagicLiftMC sont dotés d'une caractéristique unique qui leur permettent d'atteindre

rapidement le point de levage, point à partir duquel le levage se fait en incréments approximatifs de 1,91 à 5,08 cm

(0,75 à 2 po).

AVERTISSEMENT : N'utilisez jamais le cric hydraulique comme seul dispositif de soutien. Après le levage, faites

reposer immédiatement le véhicule soulevé sur une paire de béquilles de cric à capacité nominale adéquate.

Inhaltsverzeichnis

Sprachen:

Andere Omega Lift Equipment Jack Handbücher

Omega Lift Equipment

Omega Lift Equipment 24213 Betriebsanleitung

Omega Lift Equipment

Omega Lift Equipment 23226 Kurzanleitung zur Einrichtung

Omega Lift Equipment

Omega Lift Equipment 23221C Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment 32105B Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment 18202C Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment MagicLift GQ035 Bedienungsanleitung

Omega Lift Equipment

Omega Lift Equipment 21025 Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment 23301C Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment 10025W Bedienungsanleitung

Omega Lift Equipment

Omega Lift Equipment MagicLift 25032 Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment Magic Lift 25048 Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment 10500 Bedienungsanleitung

Omega Lift Equipment

Omega Lift Equipment 22101C Bedienungsanleitung

Omega Lift Equipment

Omega Lift Equipment 10025B Bedienungsanleitung

Omega Lift Equipment

Omega Lift Equipment GQ025L Bedienungsanleitung

Omega Lift Equipment

Omega Lift Equipment 18124C Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment 18127 Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment 18122C Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment 41100C Bedienungsanleitung

Omega Lift Equipment

Omega Lift Equipment 23221CIMPACT Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment 41100 Gebrauchsanweisung

Omega Lift Equipment

Omega Lift Equipment 21260AA Gebrauchsanweisung

Beliebte Jack Handbücher anderer Marken

Pittsburgh

Pittsburgh 58816 Montageanleitung

Unimec

Unimec TP Bedienungsanleitung

Sonic

Sonic 4800703 Bedienungsanleitung

BGS technic

BGS technic 70039 Bedienungsanleitung

TradeQuip

TradeQuip 1128T Bedienungsanleitung

VEVOR

VEVOR TJD-12000SP-F Bedienungsanleitung

ULTIMATE SPEED

ULTIMATE SPEED URW 2 A1 HYDRAULIC TROLLEY JACK Bedienungsanleitung

Stels

Stels 51131 Bedienungsanleitung

Valex

Valex 1650520 Bedienungsanleitung

Clarke

Clarke CTJ2500QLG Installations- und Betriebshandbuch

Pfaff

Pfaff Merkur M0 Bedienungsanleitung

Beta

Beta 3050/K Beilage

Sealey

Sealey 1050CXHV Bedienungsanleitung

Jung

Jung JH Series Bedienungsanleitung

URIAH

URIAH UC200020 Bedienungsanleitung

Kennedy

Kennedy KSJ010 Bedienungsanleitung

Grizzly

Grizzly H8097 Bedienungsanleitung

SW-Stahl

SW-Stahl 20700L Bedienungsanleitung