Omega MC-HF645 Bedienungsanleitung

Instruction Manual

Model: MC-HF645

Product Introduction

Dear customer,

Thank you for purchasing the ceramic cooker hob.

Our product can serve you many years to your satisfaction.

Please read this instructions manual carefully before using and installation.

Keep it in a good place after reading for future reference.

Thank you again for your purchase of the ceramic cooker hob, and wish

you to enjoy the pleasure brought about by it.

The microcomputer ceramic cooker hob can meet different kinds of

cuisine demands because of resistance wire heating, micro-

computerized control and multi-power selection, really the optimal choice

for modern families.

The ceramic cooker hob centers on customers and adopts personalized

design. The hob has safe and reliable performances, making your life

comfortable and enabling to fully enjoy the pleasure from life.

This hob was specially designed for domestic use.

In its constant search to improve its products,we reserves the right to modify

any technical,programme or aesthetic aspects of the appliance at any time.

Safety

High temperature protection

The temperature sensor mounted on the heating element monitor the temp-

erature inside the cooker from time to time,When an excessive temperature

is detected,the heating element will be stop power output.

Residual heat warning

When the hob has been operating for some time,there will be some residual

heat.The leteer “H”appears to warn you to keep away from it.

Auto shutdown

Another safety feature of the hob is auto shutdown.This occurs whenever

you forget to switch off a cooking zone.The default shutdown times are shown

in the table below:

Power level

Default working

timer(hour)

8 8 8 4 4 4 2 2 2

2 3 4 5 6 7 8 9

Installation

Selection of installation equipment

Drill holes on the table surface according to the sizes shown in the drawing.

For the purpose of installation and use, a minimum of 5 cm space shall be

preserved around the hole.

Be sure the thickness of the table surface is at least 30mm. Please select

heat-resistant table material to avoid larger deformation caused by the heat

radiation from the hotplate.

As shown in Figure (1)

Air intake

Figure (2)

mini 5 cm

mini 760mm

mini 2 cm

Under any circumstances, make sure the ceramic cooker hob is well

ventilated and the air inlet and outlet are not blocked.Ensure the ceramic

cooker hob is in good work state. As shown in Figure (2)

Air exit

mini 5 mm

Note: The safety distance between the ceramic hob and the cupboard above

the hotplate should be at least 760mm.

Fix the hob on the table by screw four brackets on the bottom of hob (see picture)

after installation. Adjust the bracket position to suit for different table top thickness.

Cautions

1. The ceramic cooker hob must be installed by qualified personnel or

technicians. We have professionals at your service. Please never

conduct the operation by yourself.

2. The ceramic cooker hob shall not be mounted to cooling equipment,

dishwashers and rotary dryers.

3. The ceramic cooker hob shall be installed such that better heat radiation can

be ensured to enhance its reliability.

4. The wall and induced heating zone above the table surface shall

withstand heat.

5. To avoid any damage, the sandwich layer and adhesive must be

resistant to heat.

6. A steam cleaner is not to be used.

7. A board is must to be installed underneath the hob.

The socket should be connected in compliance with the relevant standard,or

a single-pole circuit breaker.the method of connection is shown in Figure (3)

Connection to power supply

Figure (3)

eul

wolley-

eerg

N2 N1 L2 L1

nwor

kca

220-240V

ey-nee

N L

220-240V

connect to the main power supply connect to the main power supply

220-240V 2+2N~ 220-240V~

1. If the cable is damaged or needs replacing, this should be done by an

after-sales technician using the proper tools, so as to avoid any accidents.

2. If the appliance is being connected directly to the mains supply, an omnipolar

circuit breaker must be installed with a minimum gap of 3mm between the

contacts.

3. The installer must ensure that the correct electrical connection has been made

and that it complies with safety regulations.

4. The cable must not be bent or compressed.

5. The cable must be checked regularly and only replaced by a properly qualified

person.

The ceramic cooker hob appearance

ON/OFF

Glass plate

Control panel

Schematic diagram of the control panel

Instructions for Use

Power regulating key

Timer regulating key

Double zone

On/OffLock

Preparation before using

When the power is switch on,the buzzer will sound once and all the indicators

will come on for one second and go out.The hob is now in standy mode.

Place the pan in the centre of the cooking zone.

Note:

1. When the “ ” key is pressed,the hob returns to standby mode if no other

operation is carried out within one minute.

2. Every cooking zone is independent of each other.

Double zone function

The hob is fitted with double zone

Active the double zone

If you want to use bigger heating zone, press the “ ” when the hob is in

working mode .

Press the “ ” key to turn on the hob,then the power indicators show “-” and

the timer indicators shows “--”,the hob is now ready for heating.Then press

the “ ”or “ ” key for the corresponding cooking zone where there is a pan

on it,the relevant hotplate start heating.Its corresponding cooking zone indicator

flashe “5” five seconds,when the other indicators show “-”. Select the power

level by pressing the “ ” or “ ” key for the relevant hotplate.

Deactive the bouble zone

Press the “ ” when the hob is working with double zone.

Note:

1. This function is available only in the right back heating zone.

2. You can select the function from level 1 to level 9.

3. When the heating zone is in double loop working mode,the bouble loop

indicator shows ”P”.

4. You can select the size of the heating zone according to the size of the pot.

Lock Function

To ensure the safety of children,the hob is fitted with an lock device

Active the lock function

Press the “ ”,the hob then goes into lock mode, the timer shows “ ” and

the rest of the keys are disabled except the ON/OFF keys .

Deactiving the lock function

Hold down the“ ”for several seconds and the hob will return to normal working.

The power of each heating zone are shown as follow:

1 2

1200W 1800W 1000W 2200W

Heating zone

Power

Inner double

1200W

Timer function

Cooking timer

First select the cooking zone by press the “-” or “+”of the relevant heating

zone,then the cooking zone display flashing.Then adjust timer by pressing “-”

or “+” of timer,the timer is confirmed after the timer indicator flashing 5 seconds,

a red dot display at corresponding cooking zone indicator ,it reminds you a

cooking timer have been setted on this cooking zone .When cooking timer

expires,the corresponding cooking zone will be switch off automatically.

Note:Cooking timer only works for one cooking zone at the same time.

Minute reminder

Timer can be used as a minute reminder.

Press “+”or “-”of timer, the timer indicator flashes “00”,adjust timer by pressing

“+”or “-”of timer. When the time is setted, the timer indicator will stop flahing

after 5 seconds, minutes reminder starts. Buzzer will bips for 30 seconds and

the timer indicator shows “--”when the setting time finished , the work state will

not be affected by the minute reminder.

Timing cancellation

Press “+” and “-”of timer simultaneously, the timer cancelled automatically,and

the timer indicator shows “--”

Never wash the induction

cooker with water directly to

avoid danger.

Keep electrical appliance out

of reach from children or

inform person. Do not let them

use the appliances without

supervision.

Safety Reminding and Maintenance

After being used for a long

time, the corresponding

heating zone of the ceramic

cooker hob is till hot. Never

touch the ceramic surface to

avoid burning.

If the supply cord is damaged

, it must be replaced by the

manufacturer, its service agent

or similarly qualified persons

in order to avoid a hazard.

Never have the ceramic

cooker hob to work without

food inside, otherwise its

operational performance may

be affected and danger may

happen.

A dedicated power protection

air swith protection air switch

must be incorporated in the

fixed wiring in accordance

with the wiring rules.

Never use the ceramic cooker

hob in high temperature

environments such as near a

gas stove or kerosene stove.

For sealed foods such as

canned goods, please do not

heat them before opening their

covers so as to avoid any

dangers of explosion due to

heating expansion.

If the surface is cracked, swith

off the appliance to avoid the

possibility of electric shock.

Do not place rough or uneven

appliances, which may

damage the ceramic surface.

Do not put any detergents or

flammable materials in the

equipment installed under the

ceramic cooker hob.

Metallic objects such as

knives, forks,spoons and lids

should not be placed on the

hotplate since they can get

hot.

DISPOSAL: Do not dispose this

product as unsorted municipal

waste. Collection of such waste

separately for special treatment

is necessary.

Clean the ceramic cooker hob

on a regular basis to prevent

foreign matters from entering

the fan thus influencing the

normal operation.

Indoor use only.

Cleanness and Maintenance

You can easily clean the surface of the ceramic cooker hob if following the

methods given in the table.

Children should be supervised to ensure that they do not play with the appliance.

3. A steam cleaner is not to be used.

1. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

2. If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualified persons in order to avoid a hazard.

5. The appliance is not intended to be operated by means of an external timer or

separate remote-control system.

4. After use, switch off the hob element by its control and do not rely on the pan

detector.

Maintenance Service Warranty

For any failure of the product, please contact the special

maintenance department or the customer service center.

1. There is a year’s guarantee with this the brand ceramic cooker

hob.

2. The period of warranty shall start from the date on which the invoice

is issued.

3. Any one of the following cases is without the warranty:

Damages caused by improper use, storage and maintenance of

the consumer.

Damages caused by unauthorized disassembly and repair in the

maintenance department not designated by the company.

Model of invoice and model of product maintained are not in

conformity or are altered.

Valid invoice can not be presented.

Damages caused by force majeure.

Using the ceramic cooker hob for commercial purposes.

Light Clean with hot water and

damp sponge Cleaning sponge

Accumulation

of dirt

Clean with hot water and

abrasive sponge

Special cleaning sponge for

ceramic glass

Hint: please disconnect power before the cleaning.

Type of

contamination Method of cleaning Articles used for cleaning

Rings and lime

crumbles

Apply white vinegar to the

polluted zone, then wipe it

dry with soft cloth or a

special article available in

local markets

Special adhesive for ceramic

glass

Sweetmeat,

melt aluminum

or plastics

Use a scraper suitable for

ceramic glass (to protect

glass, a silicon product is

preferred) to remove

residuals

Special adhesive for ceramic

glass

Inhaltsverzeichnis

Andere Omega Kochfeld Handbücher

Omega

Omega OCC30TZ Handbuch

Omega

Omega OG70XA Bedienungsanleitung

Omega

Omega OCC70TZ Bedienungsanleitung

Omega

Omega OG63XA Bedienungsanleitung

Omega

Omega OG30XA Bedienungsanleitung

Omega

Omega OCG63FXB1 Bedienungsanleitung

Omega

Omega OC64TB Bedienungsanleitung

Omega

Omega OCI64 Bedienungsanleitung

Omega

Omega OCG755FX Technisches Handbuch

Omega

Omega OCI64PP Bedienungsanleitung

Omega

Omega OCC64KZTGG Bedienungsanleitung

Omega

Omega OG66XA Bedienungsanleitung

Omega

Omega OCG95XTGG Bedienungsanleitung

Omega

Omega OCC64TZW Bedienungsanleitung

Omega

Omega OCI60MZ Bedienungsanleitung

Omega

Omega OCGG905COM Bedienungsanleitung

Omega

Omega OCG61X Leitfaden

Omega

Omega OCG64XTGG Bedienungsanleitung

Omega

Omega OCI64B Handbuch

Omega

Omega OCI64Z Bedienungsanleitung

Omega

Omega OIC64TB Installationsanleitung

Omega

Omega OC64KZ Bedienungsanleitung

Omega

Omega OCG63X Bedienungsanleitung

Omega

Omega OCC70TZ Bedienungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Bonnet

Bonnet OPTIMUM 700 Betriebsanleitung

Jenn-Air

Jenn-Air JGCP430 Bedienungsanleitung

Frigidaire

Frigidaire FES367FCC Kurzanleitung

Ztove

Ztove EZ2 DUO Bedienungsanleitung

Kleenmaid

Kleenmaid cooking GCTK9011 Installationsanleitung

Casselin

Casselin CSASRE24 Bedienungsanleitung

Jenn-Air

Jenn-Air JGC2536EB00 Bedienungsanleitung

Waldorf

Waldorf RN8603E-B Bedienungsanleitung

Whirlpool

Whirlpool SMP658CNEIXL Bedienungsanleitung

Wolf

Wolf CI243C/B Bedienungsanleitung

Fulgor Milano

Fulgor Milano F5PGK305S1 Bedienungsanleitung

GE JP389 Bedienungsanleitung

Wells

Wells WV-2HFG Bedienungsanleitung

IKEA

IKEA Lagan HGA4K Bedienungsanleitung

Samsung

Samsung NA36N9755 Bedienungsanleitung

Miele

Miele KM 404 Bedienungsanleitung

Lacor

Lacor 69562 Technisches Datenblatt

Keating Of Chicago

Keating Of Chicago MG-2 Bedienungsanleitung