Omega OM-CP-PRHTEMP2000 Bedienungsanleitung
OM-CP-PRHTEMP2000
Pressure, Humidity and Temperature Data Logger with LCD
User’s Guide
Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia
Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia
Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6777
Mobile: +62 816 1740 8925
Fax: 021-8690 6771
2
Product Overview
The OM-CP-PRHTEMP2000 is a pressure, temperature and humidity data logger with LCD display. The conve-
nient LCD provides access to the current pressure, temperature and humidity readings, as well as minimum,
maximum and average statistics. For additional information refer to your OM-CP-PRHTEMP2000 manual and
“Data Logger & Software Operating Manual”.
Backlight
The backlight uses a significant amount of battery life. Refer to the manual to configure the auto shut-off when
not in use.
Submergibility
The OM-CP-PRHTEMP2000 is rated IP65, which means it is dust tight and can withstand water jets.
Set Password
To password protect the device so that others cannot start, stop or reset the device:
- In the Connected Devices panel, click the device desired.
- On the Device Tab, in the Information Group, click Properties. Or, right-click the device and select Properties
in the context menu.
- On the General Tab, click Set Password.
- Enter and confirm the password in the box that appears, then select OK.
OM-CP-PRHTEMP2000
3
Installation Guide
Installing the Interface cable
- OM-CP-IFC200
Insert the device into a USB port. The drivers will install automatically.
Installing the software
Insert the Omega Software Flash Drive in an open USB port. If the autorun does not appear, locate the drive
on the computer and double click on Autorun.exe. Follow the instructions provided in the Installation Wizard.
Device Operation
Connecting and Starting the data logger
1. Once the software is installed and running, plug the interface cable into the data logger.
2. Connect the USB end of the interface cable into an open USB port on the computer.
3. The device will appear in the Connected Devices list, highlight the desired data logger.
4. For most applications, select “Custom Start” from the menu bar and choose the desired start method,
reading rate and other parameters appropriate for the data logging application and click “Start”. (“Quick
Start” applies the most recent custom start options, “Batch Start” is used for managing multiple loggers
at once, “Real Time Start” stores the dataset as it records while connected to the logger.)
5. The status of the device will change to “Running”, “Waiting to Start” or “Waiting to Manual Start”,
depending upon your start method.
6. Disconnect the data logger from the interface cable and place it in the environment to measure.
Note: The device will stop recording data when the end of memory is reached or the device is stopped. At this
point the device cannot be restarted until it has been re-armed by the computer.
Downloading data from a data logger
1. Highlight the data logger in the Connected Devices list. Click “Stop” on the menu bar.
2. Once the data logger is stopped, with the logger highlighted, click “Download”. You will be prompted
to name your report.
3. Downloading will offload and save all the recorded data to the PC.
Quick Start Manual
4
Product Maintenance
Battery Replacement
Materials: 9/64” HEX Driver (Allen Key) and a Replacement Batteries (6 AA)
1. Remove the back cover from the device by unscrewing the four screws.
2. Remove the batteries from the compartment.
3. Insert the new batteries as indicated by the diagram on the battery holder.
4. Replace the cover taking care not to pinch the wires. Screw the enclosure back together.
Note: Be sure not to over tighten the screws or strip the threads.
Recalibration
The OM-CP-PRHTEMP2000 standard calibration is one point at 25 °C, two points at 25 %RH and 75 %RH and
two points at 14.7 PSI and 30 PSI. a reminder is automatically displayed in the software when the device is
due.
OM-CP-PRHTEMP 2000
Temperature Sensor Semiconductor (strain guage)
Temperature Range –20 °C to +60 °C (-4 °F to +140 °F)
Pressure Resolution 0.1°C (0.18°F)
Calibrated Accuracy +0.5 °C/+0.9 °F (0 °C to 50 °C/32 °F to 122 °F)
Pressure Sensor Semiconductor
Pressure Range 0 to 30 PSIA
Pressure Resolution 0.002PSIA
Calibrated Accuracy +1.0%FSR; 0.25% at 25 °C
Humidity Sensor Internal Semiconductor
Humidity Range 0%RH to 95%RH
Humidity Resolution 0.1%RH
Calibrated Accuracy +3%RH (2%RH @ 25 °C Typical)
Memory 87,381/channel
Reading Rate 1 reading every 2 seconds up to 1 reading every 24 hours
Required Interface Package IFC200
Baud Rate 115,200
Typical Battery Life 1 year with display off, 30 days with continuous LCD
and no backlight
Operating Environment -20°C to 60°C (-4°F to 140°F), 0%RH to 95%RH (non-condensing)
Material Black anodized aluminum
Dimensions 4.8 in x 3.3 in x 1.25 in (122 mm x 84 mm x 32 mm)
Weight 16oz (440g)
Approvals CE
OM-CP-PRHTEMP2000 General Specifications
Quick Start Manual
Office: Jl. Radin Inten II No. 62 Duren Sawit, Jakarta 13440 - Indonesia
Workshop: Jl. Pahlawan Revolusi No. 22B, Jakarta 13430 - Indonesia
Phone: 021-8690 6777 (Hunting) Fax: 021-8690 6777
Mobile: +62 816 1740 8925
Fax: 021-8690 6771
Andere Handbücher für OM-CP-PRHTEMP2000
1
Inhaltsverzeichnis
Andere Omega Datenlogger Handbücher
Omega
Omega OM-CP-OCTRTD Bedienungsanleitung
Omega
Omega OM-CP-ULTRASHOCK-A Bedienungsanleitung
Omega
Omega OM8800D Bedienungsanleitung
Omega
Omega OM-90 Series Bedienungsanleitung
Omega
Omega OMP-MODL Bedienungsanleitung
Omega
Omega OM-CP-RFPULSE2000A Bedienungsanleitung
Omega
Omega HH520 Bedienungsanleitung
Omega
Omega OM-EL-WIN-USB Series Bedienungsanleitung
Omega
Omega OM-DAQLINK-TEMP Bedienungsanleitung
Omega
Omega OM-CP-PROCESS101A Bedienungsanleitung
Omega
Omega OM-60-TE Bedienungsanleitung
Omega
Omega OM-EL-WiFi Series Bedienungsanleitung
Omega
Omega OMB-DAQ-TC-RACK Bedienungsanleitung
Omega
Omega OM-CP-TEMP101A Bedienungsanleitung
Omega
Omega OM-USB-5203 Bedienungsanleitung
Omega
Omega OM-EL-WiFi-TH Bedienungsanleitung
Omega
Omega OM-EL-WIN-USB Bedienungsanleitung
Omega
Omega OM-CP-HITEMP140-FP Bedienungsanleitung
Omega
Omega CT485B-110V-G-AL Bedienungsanleitung
Omega
Omega CDH-SD11 Bedienungsanleitung
