Omega CALIBRE 1666 Kurzanleitung

CALIBRE

1666

13 1/4’’’

Ø 30.60 mm

Version A Version B Version C

012

Versions: Trimmer Limited edition Heat-compensated

Height on movement 6.90 mm

Number of jewels 9



Exclusive OMEGA movement, Multi-function quartz. Luxury decoration, côtes de Genève, gilded

engravings. Display of hour, minute and second in centre. Digital display : hours, minutes and seconds, date,

alarm, mission elapsed time, mission elapsed alarm, universal time, universal time alarm, countdown,

chronograph.

Technical Guide TG-19-C-069-E A

Produced by: pelrom Date: 19.11.2009

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666 /1

Page

Contents

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666 /2

Calibre 1666 1

General information for calibre 1666

Major points / Standard movement exchange / Mandatory tools 3

Spare parts list for calibre 1666 4

Speciﬁc information for calibre 1666 5-17

CS Test (Customer services) / Operations to enter into CS test mode / Rate adjustment 5

Operating procedure / Sample calculation 6

Test description 7

Electrical tests 8

Operating instructions / Functions 9

Time / Hours 10

Hands 11

Date (change the date) / Alarm 12

Alarm / Mission elapsed time 13

Mission elapsed time alarm 14

Universal time / Set the universal time 15

Universal time alarm 16

Countdown / Start and stop of the countdown / Chronograph 17

General information for calibre 1666

Major points

Information on the battery (ref. 1449953E20)

3 V Lithium

Ø 23 mm H 2 mm

Renata CR2320

Varta CR2320

Energizer CR2320

Standard movement exchange

Follow Working Instruction 31 for standard movement

exchanges.

Complete movement

Exchanges

Version A Complete movement version A: only with version C

Mandatory tools:

Hand ﬁtting Ref.

Movement holder for hand fitting 502 110 0715

Tools

Plastic tweezers 502 310 0051

Full hand-fitting set 507 0011

Screwdriver for push-piece screw 502 220 0051

Nasa caseback plastic fitting 502 T98 0011

Metal fitting to remove hands 502 T98 0021

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666 /3

Spare parts list for calibre 1666

Battery Version Reference

1666A 1449953E20

1666B limited version

1666C 1449953E20

Battery insulator Version Reference

1666A 722166620651

1666B limited version

1666C 722166620651

Time setting stem switch Version Reference

1666A

7221666510201666B

1666C

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666 /4

Fig. 1.0 1.0 CS Test (Customer services)

1.1 Operations to enter into CS test mode :

1. Remove the battery

2. Wait for the LCD segments to disappear.

3. Hold the crown pressed in.

4. Insert the battery, the LCD displays «TEST 0».

5. Release the crown, test 0 is carried out.

6. Press the crown to perform the next test, the LCD

displays the number of the next test «TEST X» (see p. 7).

7. Release the crown to carry out the test.

Rate adjustment

Test 1 displays the current value of the rate correction.

This correction is calculated then saved in the movement

during production tests.

This test is also used to modify this correction value if

necessary. Every connection between the battery’s + pole

and the C+ or C- test points increases or decreases the

correction value and therefore adjusts the watch rate.

C-

C+

Battery + pole

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666 /5

Speciﬁc Information for calibre 1666

Sample calculation :

Current correction value 089

Measured rate error +0.1s/day

Calculation to be

made 0.1 x 1000

10.986 = 9

There must be 9 connections between C+ and the battery’s +

pole

New correction value to be stored in the movement 089+9 = 098

Sample calculation :

Current correction value 175

Measured rate error -0.2s/day

Calculation to be

made -0.2 x 1000

10.986 = 18

There must be 18 connections between C- and the battery’s +

pole

New correction value to be stored in the movement

175-18 = 157

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666

Operating procedure

1. Measure the rate with an integration time of

960 seconds (sixteen minutes).

The rate is measured with the stem pulled out to

position 2.

Test mode « magnetic » (rate measure of step motor).

2. Perform steps 1 to 5 of chapter 1.1 (operation to

enter into CS test mode).

3. Press the crown once, the LCD displays «TEST 1».

4. Release the crown, the LCD displays C and the

current correction value.

5. Perform corrections C+ or C- according to the

formula below (see the two examples).

6. Press P1, P2, P3 or P4 to adjust the new value.

7. The LCD displays the new correction value.

8. If the value displayed does not conform, perform

corrections on C+ or C- then press P1, P2, P3 or P4 to

adjust and display the new value.

9. Press the crown twelve times, the LCD displays «F».

10. Wait for four seconds; the watch returns to time mode.

Formula:

Comment:

When there is a positive number of pulses use C+

When there is a negative number of pulses use C-

Measured error Number of pulses

Test description:

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666 /7

Speciﬁc Information for calibre 1666

Identification Test no. Test description

IDENTIFICATION Test 0 Software identification display.

Rate adjustment Test 1

Displays the current value of the rate correction. This correction is

calculated then saved in the movement during production tests.

This test is also used to modify this value if necessary. Every

connection between the battery’s + pole and the C+ test point

(respectively C-) accelerates the rate by decrementing the value

(respectively slows down the rate by incrementing the value). This

connection can be made using a conductor tool (tweezers, wire,

etc.):

RUN MODE Test 2 Display all the LCD segments and put μC into RUN mode.

HALT MODE Test 3 Disable the LCD driver and put μC into HALT mode.

BUZZER MODE Test 4 Trip the BUZZER at a frequency of 2700 Hz.

CW seconds motor Test 5 The seconds motor is moved forward one pitch clockwise every

time P1, P2, P3 or P4 is pressed.

CW minutes motor Test 6 The minutes motor is moved forward one pitch clockwise every time

P1, P2, P3 or P4 is pressed.

CCW minutes motor Test 7 The minutes motor is moved backward one pitch clockwise every

time P1, P2, P3 or P4 is pressed.

CW minutes and seconds

motor Test 8

The seconds motor moves forward at a frequency of 32 Hz and the

minutes motor at a frequency of 0.26 Hz (30 second pitches for

one minute pitch).

LAMPE Test 9 Activates the light.

Even LCD segments Test A Displays all the even LCD segments. This test checks whether two

tracks next to one another are short-circuited.

Odd LCD segments Test B Displays all the odd LCD segments. This test checks whether two

tracks next to one another are short-circuited.

EOL Test C

Indicates the battery’s voltage level.

- Higher than 2.6 V

- Buzzer release

- Between 2.4 V and 2.6 V

- Buzzer engaged at a frequency of 2000Hz

- Lower than 2.4 V

- Buzzer engaged at a frequency of 2700 Hz

How to leave the test:

F TEST Exit

Reset the watch after about four seconds; the watch restarts in

standard Time mode. To restart in CS test mode (test 0), hold the

crown pressed in.

1.0 Electrical tests

Measurements in movement without battery enclosure.

For measurements with battery enclosure, measurement

3 is made directly on the piezzo contact spring.

Speciﬁc Information for calibre 1666

Position Setting of

apparatus Measurement Test Remarks

1 10 KΩ2.6 - 3.4 KΩCondition of seconds motor coil Measurement without battery,

voltage supply 0.2 V

Ohmmeter with a test voltage

higher than 0.4 V unsuitable

Recommended voltage 0.2 V

Ambient temperature

2a 10 KΩ2.8 - 3.8 KΩ

Condition of minutes motor coil

2b 10 KΩ2.8 - 3.8 KΩ

3 10 KΩ0.12 - 0.15 ΩCondition of alarm coil

- - 3V Battery voltage To be tested outside of the

movement

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666 /8

Fig. 1.0

Fig. 1.0 1.0 Operating instructions

Functions

The crown is the main command button for passing

from one function to another. In neutral position 1, it

guarantees the watch’s water-resistance.

A short press on the crown makes the next function

appear ; when pulled to position 2, the crown gives

access to the functions commanded by push buttons

P1, P2 and P3.

The different functions succeed one another in the

following order:

1. TIME

2. DATE

3. ALARM

4. MISSION ELAPSED TIME (MT)

5. MISSION ELAPSED TIME ALARM (MA)

6. UNIVERSAL TIME (UT)

7. UNIVERSAL TIME ALARM (UA)

8. COUNTDOWN (CDT)

9. CHRONOGRAPH (CHR)

NB:

The displays are only in English.

When the crown is in neutral position 1, the screen

may be lit at any time using push button P3. To save

energy when the light is used, the seconds hand stops

and then catches up when the light is turned off. The

push button P4 can be used at any time to access to

MISSION ELAPSED TIME (MT).

A second press on P4 or the crown makes the previous

function return. A press of more than 3 seconds clears

the screen. A press on the crown or a push button

makes the previous function return.

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666 /9

Speciﬁc Information for calibre 1666

/10

OMEGA SA WORLD SERVICE ORGANIZATION GT-19-C-069-E - A - 1666

Speciﬁc Information for calibre 1666

Fig. 2.0

Fig. 2.1

2.0 TIME

To set the digital time:

- Press the crown until TIME is displayed.

- Pull out the crown to position 2 : Go On ?appears.

- Press P1, the seconds (SEC) blink.

- Press P2 to add or P3 to subtract seconds.

- Press P1, the minutes (MIN) blink.

- Press P2 to add or P3 to subtract minutes.

- Press P1, the hours (HOURS) blink.

- Press P2 to add or P3 to subtract hours.

- Push the crown back into position 1.

2.1 HOURS

Shortcut to the hours :

The hours can be changed directly

(e.g. change of time zone).

- Press the crown until TIME is displayed.

- Press the crown for more than 3 seconds:

HOURS is displayed and the hour blinks.

- Press P2 to add or P3 to subtract hours.

- Press the crown again.

Andere Handbücher für CALIBRE 1666

Inhaltsverzeichnis

Andere Omega Betrachten Handbücher

Omega

Omega 232.92.46.21.03.001 Bedienungsanleitung

Omega

Omega 1680 B CALIBRE Kurzanleitung

Omega

Omega DE VILLE 424.20.37.20.58.001 Bedienungsanleitung

Omega

Omega 5200 Kurzanleitung

Omega

Omega De Ville Bedienungsanleitung

Omega

Omega SEAMASTER Caliber 9300 Bedienungsanleitung

Omega

Omega Calibre 866 A Kurzanleitung

Omega

Omega Seamaster Aqua Terra Gold & Steel Bedienungsanleitung

Omega

Omega SEAMASTER PLANET OCEAN 600M OMEGA CO-AXIAL 42... Bedienungsanleitung

Omega

Omega 2503.80.00 Bedienungsanleitung

Omega

Omega SPECIALITIES Bedienungsanleitung

Omega

Omega Seamaster Planet Ocean 600M Bedienungsanleitung

Omega

Omega 1310 Kurzanleitung

Omega

Omega 232.32.44.22.01.001 Bedienungsanleitung

Omega

Omega 1151 Bedienungsanleitung

Omega

Omega Calibre 3602 A Bedienungsanleitung

Omega

Omega SEAMASTER PLANET OCEAN 600M OMEGA CO-AXIAL 45.5... Bedienungsanleitung

Omega

Omega SPEEDMASTER MOONWATCH Bedienungsanleitung

Omega

Omega 232.32.46.21.01.001 Bedienungsanleitung

Omega

Omega 1154 A Kurzanleitung

Omega

Omega DE VILLE TOURBILLON CO-AXIAL NUMBERED EDITION 38.7... Bedienungsanleitung

Omega

Omega 2628A Kurzanleitung

Omega

Omega 332 Montageanleitung

Omega

Omega Speedmaster X-33 REGATTA Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung