Omnia ORF-KC4 Bedienungsanleitung
RF Remote Controller
ORF-KC4
· Working voltage: DC12V
· Working Current: ≤ 8MA
· Battery: 1 x CR2032 3V
· Operating frequency: 433Mhz
· Modulation: ASK (AM)
· Transmit Power: ≤ 10MW
· Working temperature: -20°C ~ +60°C
Remote Controller parameters:
Configuration:
1. Paring with aditional omnia products
Paring with Smart Wall Switch WiFi/RF (OWS-US-123)
On the Smart Wall Switch press and hold the button you want to pair for
3 seconds,, the red indicador lights up, and the button enters learning
mode for 10 seconds. At this time, press the button on the RF Remote
Controller, the red indicator light on the Smart Wall Switch WiFi/RF will
turn off, indicating success.
Clean code from the Smart Wall Switch WiFi/RF: Press and hold the
button to be cleared For 6 seconds, the indicator light will go from red to
blue, when in blue release, delition is succesful.
Pairing with the Smart Universal Breaker (OSS8839):
Precautions
The OMNIA RF Remote Controller can only work with the other OMNIA RF
enabled devices.
-Smart Wall Switch WiFi/RF (OWS-US-123).
-Smart Universal Breaker (OSS8839).
2. To avoid interference during configuration. Keep away from all
electronic signals, such as mobile phones and transmission products.
Make sure your remote has enough power, place the two remote
controllers as close as possible.
Make sure the original remote control you want to copy works normally.
Then after copying the OMNIA RF Remote Controller press the button to
ensure functionality is completely copied.
smartomniacrsmart.omnia
www.smartomnia.com
RF Remote Controller
ORF-KC4
User Manual
Andere Omnia Fernbedienung Handbücher
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
