Omnimount TVM PRO Series Bedienungsanleitung

TVM PRO Television Wall Mount

Installation Instructions

Models: TVM 21 PRO

TVM 27 PRO

Parts List:

Item

Description Quantity

1 Wall Bracket 1

2 Support Arm 1

3 Platform 1

4 Platform Swivel Bracket 1

5 Nose Piece 1

6 Square Washer 1

7 Platform Slide Bar 1

8 Medium Hex Wrench 1

9 5/16” x 1” Platform Screw 1

10 Flat Washer 1

11 Small Hex Wrench 1

12 M6 x 20mm Tilt Screws 2

13 3/8” x ½” Pivot Bolts 2

14 5/16” Platform Lock Nut 1

15 Large Hex Wrench 1

16 Wall Bracket Cover 1

17 Wall Anchors 4

18 ¼” x 2” Lag Bolts 4

19 Security Strap 1

Step 1

Use electronic stud finder to locate center of stud.

Note: When mounting to masonry, go directly to Step 2

Step 2

Use wall bracket (1) as template to mark mounting hole locations.

Wooden Stud Mounting:

Using 1/8” drill bit, drill mounting holes to a depth of 2”.

Using a 10mm wrench, bolt the wall bracket to the wall with the supplied ¼” lag bolts (18).

Note: To make installation easier, dab a bit of liquid soap onto the bolt threads before driving bolt into the stud.

Masonry Mounting:

Use a 3/8” masonry drill bit, and drill mounting holes to a depth of 2”.

Insert wall anchors (17) into mounting holes, and tap flush with hammer.

Using a 10mm wrench, bolt the wall bracket to the wall with the supplied ¼” lag bolts (18).

Step 3

3a) Slide wall bracket cover (16) over support arm, with flat side facing wall.

Place flat washer (10) into round depression in center of platform swivel bracket (4).

Insert platform tilt screws (12) up through two countersunk holes in bottom of platform

swivel bracket.

3b) Insert 5/16” platform screw (9) down through center of platform swivel bracket. Place

platform swivel bracket assembly onto top plate at end of support arm, with main bolt

passing through center hole.

Install square washer (6) onto platform main bolt, and then thread platform lock nut (14)

onto platform screw. Tighten platform screw with medium hex wrench (8). Do not over-

tighten or platform will not swivel.

TVM PRO Television Wall Mount

3c) Place platform on top of platform swivel bracket, with platform tilt

screws passing through slots on platform as shown. Turn front edge of

platform at right angles to support arm, as shown. Insert small hex wrench

through holes in bottom of platform support, and thread platform tilt screws

into threaded ends of platform slide bar (7). using small hex wrench (11),

as shown.

Step 4

Insert support arm into wall bracket. Thread 3/8” pivot bolts

into support arm, and secure with large hex wrench.

Do not over tighten lock nut, or arm will not swing freely.

Snap wall bracket cover into place.

Note: If using the optional TVC component mount, install it at this time.

Step 5

Thread open end of security strap (19) up through a slot on the outer edge of platform, across the platform, and then

down through the other slot. Place TV squarely onto platform.

Pull two ends of security strap over TV, thread strap ends through strap buckle (as shown),

and secure tightly.

Optional: Bolt TV to the platform by passing security screws (not supplied) through grid on bottom of platform into

threaded lands on bottom of TV.

Note: You must consult the TV manufacturer for the correct size and length of bolts to use for your make/model of

television. Failure to do so may result in damage to the TV.

Step 6

Adjust platform for desired amount of tilt:

To increase tilt angle, hold top of TV and carefully push front edge of platform backwards.

To decrease tilt angle, hold top of TV and carefully pull front edge of platform forwards.

With tilt angle set, turn front edge of platform at right angles to support arm. Insert small hex wrench

through holes in bottom of platform support as shown, and tighten tilt screws securely.

Step 7

If desired, press nose piece (5) into place at end of support arm, as shown.

OmniMount Systems, Inc.

8201 S. 48

Street • Phoenix, AZ 85044

1-800-MOUNT-IT • www.omnimount.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omnimount TV-Halterung Handbücher

Omnimount

Omnimount WM3-S Bedienungsanleitung

Omnimount

Omnimount ELEMENTS 403 FP Betriebsanleitung

Omnimount

Omnimount OL50FT Bedienungsanleitung

Omnimount

Omnimount OE200F Bedienungsanleitung

Omnimount

Omnimount Professional Series Bedienungsanleitung

Omnimount

Omnimount OM10017 Bedienungsanleitung

Omnimount

Omnimount Lift 42 Bedienungsanleitung

Omnimount

Omnimount LEDW60 Bedienungsanleitung

Omnimount

Omnimount OC120FM Bedienungsanleitung

Omnimount

Omnimount 10050 Bedienungsanleitung

Omnimount

Omnimount OC80FM Bedienungsanleitung

Omnimount

Omnimount ELEMENTS503 FP Bedienungsanleitung

Omnimount

Omnimount OL125 C Bedienungsanleitung

Omnimount

Omnimount 1100167 Bedienungsanleitung

Omnimount

Omnimount OM1100275 Bedienungsanleitung

Omnimount

Omnimount OMN-OS50F Bedienungsanleitung

Omnimount

Omnimount OC40FMX Bedienungsanleitung

Omnimount

Omnimount VB60LED Bedienungsanleitung

Omnimount

Omnimount 1004186 Bedienungsanleitung

Omnimount

Omnimount Wishbone Series Bedienungsanleitung

Omnimount

Omnimount SW1 Bedienungsanleitung

Omnimount

Omnimount 1004409 Bedienungsanleitung

Omnimount

Omnimount OM10016 Bedienungsanleitung

Omnimount

Omnimount NC200-F Bedienungsanleitung

Beliebte TV-Halterung Handbücher anderer Marken

Ergotron

Ergotron Neo Flex Cantilever UHD Bedienungsanleitung

StarTech.com

StarTech.com FPCEILBTB Bedienungsanleitung

VonHaus

VonHaus 05/038 Bedienungsanleitung

Techlink

Techlink ECHO TV Bedienungsanleitung

Sandstrom

Sandstrom SSTVMC12X Bedienungsanleitung

Sony

Sony SU-WL700 Leitfaden

ICW

ICW SCACC18 Bedienungsanleitung

LG WM-L640V Bedienungsanleitung

Gembird

Gembird WM-65ST-01 Bedienungsanleitung

ERARD

ERARD FiTUP XXL 035320 Bedienungsanleitung

PEERLESS

PEERLESS PLCK-1 Leitfaden

Kanto

Kanto RCF180 Bedienungsanleitung

GEM

GEM GEM GP001 Bedienungsanleitung

Gladiator Joe

Gladiator Joe GJ0A0053 Bedienungsanleitung

Vivotek

Vivotek AM-105 Bedienungsanleitung

Vivo

Vivo VESA STAND-VAD1B Bedienungsanleitung

AmazonBasics

AmazonBasics B07QG3LMG4 Bedienungsanleitung

Secura

Secura QLF210 Bedienungsanleitung