Omron H7GP - Bedienungsanleitung

Total Counter/Time Counter H7GP/H7HP 1

Total Counter/Time Counter

H7GP/H7HP

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions

or comments. Refer to Warranty and Application Considerations (page 20), and Safety Precautions (page 15).

High-visibility, IP66/NEMA4 Protection Total Counter/Time Counter Range

• IP66 (JEM standard IP66G: oil resistance) and NEMA4 protection standards.

• Switch between NPN and PNP operation.

• Both external and manual resets provided.

• Finger-protection terminal block cover prevents electrical shocks conforming to VDE0106/100.

• Conforms to EMC standards (EN61326).

• Conforms to IEC standards, and approved by UL and CSA.

• Wide power supply range.

• Six-language instruction manual provided.

Contents

Total Counter/Time Counter

H7GP .............................................................................. 2

H7HP .............................................................................. 8

Common to Both Counters

Input Connections........................................................... 14

Safety Precautions.......................................................... 15

Degree of Protection....................................................... 17

H7@P Series

•6-digit total counter

•6-digit time counter

•DIN 48 x 24

•6-digit total counter/time counter

•8-digit total counter

•DIN 72 x 36

H7HPH7GP

2Total Counter/Time Counter (DIN 48 x 24) H7GP

Total Counter/Time Counter (DIN 48 x 24)

H7GP

Compact Total Counters and Time Counters

with Easy-to-read Displays and IP66G/

NEMA4 Water and Oil Resistance

• High-visibility, negative transmissive LCD display with 8.5-mm-

high characters and built-in red LED backlight at low power con-

sumption.

• Compact (80 mm) body.

Model Number Structure

■Model Number Legend

1. Classification

C: Total counter

T: Time counter

2. Supply Voltage

None: 100 to 240 VAC

D: 12 to 24 VDC

3. Case Color of Front Section

None: Light gray (Munsell 5Y7/1)

B: Black

Ordering Information

■List of Models

1 2 3

H7GP-@@@

Supply voltage 6-digit total counter 6-digit time counter

Light gray Black Light gray Black

100 to 240 VAC H7GP-C H7GP-CB H7GP-T H7GP-TB

12 to 24 VDC H7GP-CD H7GP-CDB H7GP-TD H7GP-TDB

Total Counter/Time Counter (DIN 48 x 24) H7GP 3

Specifications

■Ratings

Note: 1. Contains 20% ripple (p-p) max.

2. Only a non-voltage input (NPN transistor) is possible for the key protection input. The key protection input will be a non-voltage input

even if the NPN/PNP input mode is set to PNP. Key protection is used to prohibit operating the Reset Key. The reset input terminals will

still be functional.

Item 6-digit total counter 6-digit time counter

H7GP-C H7GP-CD H7GP-T H7GP-TD

Rated supply voltage 100 to 240 VAC

(50/60 Hz)

12 to 24 VDC

(see note 1)

100 to 240 VAC

(50/60 Hz)

12 to 24 VDC

(see note 1)

External power supply 50 mA at 12 VDC --- 50 mA at 12 VDC ---

Operating voltage range 85% to 110% of rated supply voltage

Power consumption 100 to 240 VAC: 6.5 VA max.

12 to 24 VDC: 0.6 W max.

Dimensions 48 x 24 x 80 mm (W x H x D)

Mounting method Flush mounting

External connections Screw terminals

Degree of protection Panel surface: JEM IP66G and NEMA Type 4 (indoors)

Display 7-segment, negative transmissive LCD (with red backlight)

Digits 6 digits (8.5-mm-high characters)

Input mode Up (increment) Accumulative

Max. counting speeds 30 Hz or 5 kHz (selected via DIP switch) ---

Counting range 0 to 999999 ---

Time specification --- 0.1 to 99999.9 h/1 s to 99 h 59 min 59 s

Timing accuracy --- ±100 ppm (–10°C to 55°C)

Memory backup EEP-ROM: 200,000 operations min.

Input Input signals Count, reset, and key protection (see note 2) Start, reset, and key protection (see note 2)

Input method No-voltage input (NPN transistor input) or voltage input (PNP transistor input) (selected via DIP switch)

Count, reset,

start

No-voltage input (NPN transistor input)

Short-circuit (ON) impedance: 1 KΩmax.

Short-circuit (ON) residual voltage:2 VDC max.

Open (OFF) impedance: 100 kΩmin.

Voltage input (PNP transistor input)

Short-circuit (ON) impedance: 1 KΩmax.

ON voltage: 9 to 24 VDC

OFF voltage: 5 VDC max.

Open (OFF) impedance: 100 kΩmin.

Key protection No-voltage input (NPN transistor input)

Short-circuit (ON) impedance: 1 KΩmax.

Short-circuit (ON) residual voltage:0.5 VDC max.

Open (OFF) impedance: 100 kΩmin.

Input re-

sponse

speed

Reset 20 or 1 ms (automatically switched according to

counting speed)

20 ms

Start --- 20 ms

Key protection Approx. 1 s Approx. 1 s

Reset system External and manual resets

4Total Counter/Time Counter (DIN 48 x 24) H7GP

■Characteristics

Insulation resistance 100 MΩmin. (at 500 VDC)

Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between current-carrying terminal and exposed non-current-carrying metal parts

(AC model)

1,000 VAC, 50/60 Hz for 1 min between current-carrying terminal and exposed non-current-carrying metal parts

(DC model)

2,000 VAC, 50/60 Hz for 1 min between power terminals and control input terminals (AC model)

1,000 VAC, 50/60 Hz for 1 min between power terminals and control input terminals (DC model)

Impulse withstand voltage 3 kV (between power terminals) (1 kV for 12-to-24-VDC models)

4.5 kV (between current-carrying terminal and exposed non-current-carrying metal parts) (1.5 kV for 12-to-24-VDC

models)

Noise immunity ±1.5 kV (between AC power terminals), ±480 V (between DC power terminals),

±480 V (between input terminals);

square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1-ns rise)

Static immunity Display: Malfunction:8 kV

Destruction:15 kV

DIP switch: Malfunction:4 kV

Destruction:8 kV

Vibration resistance Destruction: 10 to 55 Hz with 0.75-mm single amplitude, four cycles each in three directions (8 minutes per cycle)

Malfunction: 10 to 55 Hz with 0.5-mm single amplitude, four cycles each in three directions (8 minutes per cycle)

Shock resistance Destruction: 294 m/s2each in three directions

Malfunction: 196 m/s2each in three directions

Ambient temperature Operating: –10°C to 55°C (with no icing)

Storage: –25°C to 65°C (with no icing)

Ambient humidity Operating: 35% to 85%

EMC (EMI) EN61326

Emission Enclosure: EN55011 Group 1 class A

Emission AC Mains: EN55011 Group 1 class A

(EMS) EN61326

Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Immunity RF-interference: EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1 GHz) (level 3);

10 V/m (Pulse-modulated, 900 MHz ±5 MHz) (level 3)

Immunity Conducted Disturbance: EN61000-4-6: 10 V (0.15 to 80 MHz) (according to EN61000-6-2)

Immunity Burst: EN61000-4-4: 2 kV power-line (level 3);

2 kV I/O signal-line (level 4)

Immunity Surge: EN61000-4-5: 1 kV line to lines (power and output lines) (level 2);

2 kV line to ground (power and output lines) (level 3)

Immunity Voltage Dip/Interruption: EN61000-4-11: 0.5 cycle, 100% (rated voltage)

Approved standards UL508, CSA22.2 No.14, conforms to EN61010-1, VDE0106/P100

Case color Rear section: Gray smoke; Front section: 5Y7/1 (light gray) or N1.5 (black)

Weight Approx. 76 g

Total Counter/Time Counter (DIN 48 x 24) H7GP 5

Connections

■Terminal Arrangement

Note: Non-contact input is also available.

5678

321

0 V

12 VDC0 V

5678

321

12 VDC0 V

5678

321

5678

321

0 V

AC Models

H7GP-C H7GP-T

DC Models

H7GP-CD H7GP-TD

Unused

Unused Unused

12 to 24 VDC

PNP mode

NPN mode

100 to 240 VAC

Unused

NPN mode

PNP mode

100 to 240 VAC

Unused

NPN mode

PNP mode

Unused

Unused Unused

12 to 24 VDC

PNP mode

NPN mode

External power supply

12 VDC 50 mA max.

Power

supply

Power

supply

Key protection

input

Reset

input

Count

input

Power

supply

Key protection

input

Reset

input

Count

input

External power supply

12 VDC 50 mA max.

Power

supply

Power

supply

Key protection

input

Reset

input

Count

input

Power

supply

Key protection

input

Reset

input

Start

input

6Total Counter/Time Counter (DIN 48 x 24) H7GP

Operation

■DIP Switch Settings

Set all DIP switches before mounting the Counter to a control panel.

All switches are set toward the display panel before shipping.

H7GP-C/-CD

H7GP-T/-TD

Note: 1. When the setting has been changed, turned power off and

on to continue. The display will show “0” when the power is

turned back on.

2. The decimal point will flash every second when “99999.9 h”

is set.

■Operating Modes

Nomenclature

Switch Item Function

3 (On right side

from front)

Input mode (note

Display side NPN

Terminal side PNP

4 (On left side

from front)

Counting speed

(note 1)

Display side 30 Hz

Terminal side 5 kHz

Switch Item Function

3 (On right side

from front)

Input mode

(note 1)

Display side NPN

Terminal side PNP

4 (On left side

from front)

Time range

(note 1)

Display side 99999.9h

(note 2)

Terminal side 99 h 59 min

59 s

00.0h

AC (2-7)

DC (2-5)

AC (2-7)

DC (2-5)

AC (3-7)

DC (3-5)

999999

AC (3-7)

DC (3-5)

Total Counters Time Counters

Reset input

Count input

Display

Start input

Display

Reset input

99999.9 h

(see note)

Note: The count value will return to "0" when "999999" is

exceeded.

Note: Display values are shown for full scale set to 99999.9 h.

The count value will return to "0" when "99999.9" is

exceeded.

1. Reset Key

Resets the count value, but will not operate while

the keys are protected.

2. Key Protection Indicator

Lit while the keys are protected. (Reset Key is

disabled.).

3. NPN/PNP DIP Switch

(Count or start with reset)

When the setting has been changed, turned power

off and on to continue. The display will show "0"

when the power is turned back on. See below for

details.

4. Counting Speed DIP Switch (H7GP-C)

Time Range DIP Switch (H7GP-T)

When the setting has been changed, turned power

off and on to continue. The display will show "0"

when the power is turned back on. Refer to DIP

Switch Setting for details.

Total Counter/Time Counter (DIN 48 x 24) H7GP 7

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Panel Cutouts

With Flush Mounting Bracket

Terminal cover (provided)

Panel

M3.5 terminal screw

H7GP-C

H7GP-T

Y92S-32 rubber

packing (provided)

Y92F-32 flush mounting

adaptor (provided)

Panel cutouts are as shown below

(according to DIN43700).

Note: 1. The mounting panel thick-

ness should be 1 to 6 mm.

2. Water resistance will

be lost if Counters are

mounted side-by-side.

8Total Counter/Time Counter (DIN 72 x 36) H7HP

Total Counter/Time Counter (DIN 72 x 36)

H7HP

Compact Total Counters and Time Counters

with Easy-to-read Displays and IP66G/

NEMA4 Water and Oil Resistance

• Large, easy-to-read displays: 15-mm-high characters for 6-digit

models; 12-mm-high characters for 8-digit models.

• High-visibility, negative transmissive LCD display with built-in

red LED backlight at low power consumption.

• Compact (66 mm) body.

• Switch 6-digit models between total counter and time counter

operation.

Model Number Structure

■Model Number Legend

1. Classification

A: Total counter/time counter

C: Total counter

2. Digits

None: 6 digits

8: 8 digits

3. Supply Voltage

None: 100 to 240 VAC

D: 12 to 24 VDC

4. Case Color

None: Light gray (Munsell 5Y7/1)

B: Black

Ordering Information

■List of Models

1 2 3 4

H7HP-@@@@

Supply voltage 6-digit total counter/time counter 8-digit total counter

Light gray Black Light gray Black

100 to 240 VAC H7HP-A H7HP-AB H7HP-C8 H7HP-C8B

12 to 24 VDC H7HP-AD H7HP-ADB H7HP-C8D H7HP-C8DB

Total Counter/Time Counter (DIN 72 x 36) H7HP 9

Specifications

■Ratings

Note: 1. Contains 20% ripple (p-p) max.

2. Only a non-voltage input (NPN transistor) is possible for the key protection input. The key protection input will be a non-voltage input

even if the NPN/PNP input mode is set to PNP. Key protection is used to prohibit operating the Reset Key. The reset input terminals will

still be functional.

Item 6-digit total counter/time counter 8-digit total counter

H7HP-A H7HP-AD H7HP-C8 H7HP-C8D

Rated supply voltage 100 to 240 VAC (50/60 Hz) 12 to 24 VDC (see note 1) 100 to 240 VAC (50/60 Hz) 12 to 24 VDC (see note 1)

External power supply 50 mA at 12 VDC --- 50 mA at 12 VDC ---

Operating voltage range 85% to 110% of rated supply voltage

Power consumption 100 to 240 VAC: 6.5 VA max.

12 to 24 VDC: 0.6 W max.

Dimensions 72 x 36 x 66 mm (W x H x D)

Mounting method Flush mounting

External connections Screw terminals

Degree of protection Panel surface: IEC IP66 (JEM standard IP66G) and NEMA Type 4 (indoors)

Display 7-segment, negative transmissive LCD (with red backlight)

Digits 6 digits (15-mm-high characters) 8 digits (12-mm-high characters)

Function Total counter/time counter (selected via DIP switch) Total counter

Input mode Up/down (individual) (total counter), or accumulative

(time counter)

Up/down (individual)

Max. counting speeds 30 Hz or 5 kHz (selected via DIP switch)

Counting range –99999 to 999999 –9999999 to 99999999

Time specification 0.1 to 99999.9 h/1 s to 99 h 59 min 59 s ---

Timing accuracy ±100 ppm (–10°C to 55°C) ---

Memory backup EEP-ROM: 200,000 operations min.

Input Input signals Count 1 (increment), count 2 (decrement), reset, and key protection (see note 2)

Input method No-voltage input (NPN transistor input) or voltage input (PNP transistor input) (selected via DIP switch)

Count, start,

gate, reset

No-voltage input (NPN transistor input)

Short-circuit (ON) impedance: 1 KΩmax.

Short-circuit (ON) residual voltage: 2 VDC max.

Open (OFF) impedance: 100 kΩmin.

Voltage input (PNP transistor input)

Short-circuit (ON) impedance: 1 KΩmax.

ON voltage: 9 to 24 VDC

OFF voltage: 5 VDC max.

Open (OFF) impedance: 100 kΩmin.

Key protection No-voltage input (NPN transistor input)

Short-circuit (ON) impedance: 1 KΩmax.

Short-circuit (ON) residual voltage: 0.5 VDC max.

Open (OFF) impedance: 100 kΩmin.

Input re-

sponse

speed

Reset Time counter: 20 ms; total counter: 20 ms or 1 ms (automatically switched according to counting speed)

Start Time counter: 20 ms

Key protection Approx. 1 s Approx. 1 s

Reset system External and manual resets

10 Total Counter/Time Counter (DIN 72 x 36) H7HP

■Characteristics

Insulation resistance 100 MΩmin. (at 500 VDC)

Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between current-carrying terminal and exposed non-current-carrying metal parts

(AC model)

1,000 VAC, 50/60 Hz for 1 min between current-carrying terminal and exposed non-current-carrying metal parts

(DC model)

2,000 VAC, 50/60 Hz for 1 min between power terminals and control input terminals (AC model)

1,000 VAC, 50/60 Hz for 1 min between power terminals and control input terminals (DC model)

Impulse withstand voltage 3 kV (between power terminals) (1 kV for 12-to-24-VDC models)

4.5 kV (between current-carrying terminal and exposed non-current-carrying metal parts) (1.5 kV for 12-to-24-VDC

models)

Noise immunity ±1.5 kV (between AC power terminals), ±480 V (between DC power terminals),

±480 V (between input terminals);

square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1-ns rise)

Static immunity Display: Malfunction: 8 kV

Destruction: 15 kV

DIP switch: Malfunction: 4 kV

Destruction: 8 kV

Vibration resistance Destruction: 10 to 55 Hz with 0.75-mm single amplitude, four cycles each in three directions (8 minutes per cycle)

Malfunction: 10 to 55 Hz with 0.5-mm single amplitude, four cycles each in three directions (8 minutes per cycle)

Shock resistance Destruction: 294 m/s2each in three directions

Malfunction: 196 m/s2each in three directions

Ambient temperature Operating: –10°C to 55°C (with no icing)

Storage: –25°C to 65°C (with no icing)

Ambient humidity Operating: 35% to 85%

EMC (EMI) E61326

Emission Enclosure: EN55011 Group 1 class A

Emission AC Mains: EN55011 Group 1 class A

(EMS) EN61326

Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Immunity RF-interference: EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1 GHz) (level 3);

10 V/m (Pulse-modulated, 900 MHz ±5 MHz) (level 3)

Immunity Conducted Disturbance: EN61000-4-6: 10 V (0.15 to 80 MHz) (according to EN61000-6-2)

Immunity Burst: EN61000-4-4: 2 kV power-line (level 3);

2 kV I/O signal-line (level 4)

Immunity Surge: EN61000-4-5: 1 kV line to lines (power and output lines) (level 2);

2 kV line to ground (power and output lines) (level 3)

Immunity Voltage Dip/Interruption: EN61000-4-11: 0.5 cycle, 100% (rated voltage)

Approved standards UL508, CSA22.2 No.14, conforms to EN61010-1, VDE0106/P100

Case color Rear section: Gray smoke; Front section: 5Y7/1 (light gray) or N1.5 (black)

Weight Approx. 106 g

Andere Handbücher für H7GP -

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Kasse Handbücher

Omron

Omron H7E-P Series Bedienungsanleitung

Omron

Omron H7CR-A Series Bedienungsanleitung

Omron

Omron H7CZ-L8 Bedienungsanleitung

Omron

Omron CJ1W-CTL41-E Installationshandbuch

Omron

Omron H7BR Series Bedienungsanleitung

Omron

Omron H7CL Series Bedienungsanleitung

Omron

Omron H8CA-S Series Bedienungsanleitung

Omron

Omron H7CX-Ax-N Series Bedienungsanleitung

Omron

Omron H7BR Series Bedienungsanleitung

Omron

Omron H7GP - Bedienungsanleitung

Omron

Omron H7CX- -N Series Bedienungsanleitung

Omron

Omron SYSMAC C200H-CT001-V1 Bedienungsanleitung

Omron

Omron H8BM Series Bedienungsanleitung

Omron

Omron HJ-325 Bedienungsanleitung

Omron

Omron H7BX-AD1 Bedienungsanleitung

Omron

Omron H7BX - Bedienungsanleitung

Omron

Omron SYSMAC CS Series Bedienungsanleitung

Omron

Omron H8BM-R Series Bedienungsanleitung

Omron

Omron CS1W-CT041 Bedienungsanleitung

Omron

Omron H7BX - Bedienungsanleitung

Omron

Omron C200H-CT021 Bedienungsanleitung

Omron

Omron Walking Style One 2.1 Bedienungsanleitung

Omron

Omron H7BX - Bedienungsanleitung

Omron

Omron H7CZ Series Bedienungsanleitung

Beliebte Kasse Handbücher anderer Marken

FAAC

FAAC XTR B Bedienungsanleitung

Olympia

Olympia NC-350A Series Bedienungsanleitung

Evco

Evco EV7001 Bedienungsanleitung

Record

Record FlowControl Bedienungsanleitung

XIA

XIA UltraLo-1800 Bedienungsanleitung

Cashmaster

Cashmaster Sigma 105 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 53151A Bedienungsanleitung

Cashmaster

Cashmaster Sigma 105 Bedienungsanleitung

Tellermate

Tellermate TY Gebrauchs- und Pflegehandbuch

HYOSUNG

HYOSUNG MX-4000W Bedienungsanleitung

Cashmaster

Cashmaster Sigma 105 Bedienungsanleitung

CCE

CCE 3200 Bedienungsanleitung

HP 53150A Series Betriebsanleitung

HYOSUNG

HYOSUNG 1800CE Bedienungsanleitung

MZ electronic

MZ electronic EV-040 Bedienungsanleitung

Delfield

Delfield Shelleysteel SCFM-50 Bedienungsanleitung

TSI Instruments

TSI Instruments AEROTRAK+ 7201 Bedienungsanleitung

CardTronics

CardTronics Triton 9700 Bedienungsanleitung