Omron CS1W-MC221 - Bedienungsanleitung

45Motion control units

Motion controllers

CS1W-MC421/-MC221

Motion control units

High-precision, motion controller with multi-

tasking G-language programming

• High-speed control of up to 4 axes with one unit and

up to 76 axes with one PLC (19 units x 4 axes)

(assumes that power supply unit capacity is not

exceeded).

• Winding operations easily controlled at high-speed

using traverse positioning control.

• High-speed response to commands from CPU unit

(8 ms for 2 axes, 13 ms for 4 axes).

• Encoder response of 2 Mpps possible with 4x

frequency multiplication for applications with high-

speed, high-precision servo motors.

• D interrupt code outputs to CPU unit at end of

positioning or at specified positions (D code output

time: 3.3 ms max.).

• CX-motion Windows-based support software

define user mnemonics to use in place of G codes

to simplify MC program development and analysis.

• Servo trace function from CX-motion to trace error

counter changes or motor speeds.

• Automatic loading function

MC programs and positioning data can be auto-

matically downloaded from computer memory when

required by the MC unit.

The motion controller provides closed-loop motion control via analog outputs for up to 4 axes, and supports the G language for

advanced, high-speed, high-precision position control. Multi-tasking allows you to run the axes independently for a wider range of

application.

Function

System configuration

Accurax G5

Servo motors

Accurax G5

Servo motors

Accurax G5

Servo drive

Accurax G5

Servo drive

I/O signals

(CN1 connector)

I/O signals

(CN1 connector)

CS1 series

Motion control unit

CS1W-MC_21

Emergency stop input,

home and limit switches

Input

Personal computer

Software: CX-One

Terminal block

Y203-EN2-04+MotionDrives+Cat.book Seite 45 Freitag, 21. Mai 2010 11:01 11

46 Motion controllers

General

CX-Motion: Windows-based support software

Motion control unit

Accurax G5 servo drive cables

I/O terminal block and cables

Computer software

Specifications

Model CS1W-MC421-V1 CS1W-MC221-V1

Classification CS1 Special I/O unit

Control method Closed loop with automatic trapezoid or S-curve acceleration/deceleration

Control output signals Analog

Internal programming language G language (program started by command sent from CPU unit’s ladder program.)

Controlled axes 4 axes max. 2 axes max.

Maximum position value –39,999,999 to 39,999,999 (for minimum setting unit of 1)

Synchronous axis control 4 axes max. 2 axes max.

Positioning Linear interpolation 4 axes max. 2 axes max.

Arc interpolation 2 axes max. in a plane

Helical interpolation 2-axis arc interpolation in a plane + feed axis ---

Traverse 2-axis traverse feeding

Infinite feed Infinite feeding of one or more axes

Interrupt feed Interrupt feeding for specified axes (positioning can be specified for when there is no interrupt.)

Task

programming

capacity

Number of tasks 4 tasks max. 2 tasks max.

Number of programs 25 programs when using 4 tasks 50 programs when using 2 tasks

Program capacity 500 blocks per task when using 4 tasks 1,000 blocks per task when using 2 tasks

Model WS02-MCTC1-EV@

Supported MC units CS1W-MC221/421, C200H-MC221, and CV500-MC221/421

Applicable computer DOS, OS: Windows 95/98 or Windows NT Version 4.0

Functions Functions required for MC unit control: creating/editing/saving/printing system parameters, positioning data,

and MC programs; monitoring MC unit operation

Ordering information

Name Model

2 axes motion control unit. CS1W-MC221-V1

4 axes motion control unit. CS1W-MC421-V1

Description Connect to Model

Axis control cable

(1 axis) Motion control units

CS1W-MC221 (1 cable needed)

CS1W-MC421 (2 cables needed)

1 m R88A-CPG001M1

2 m R88A-CPG002M1

3 m R88A-CPG003M1

5 m R88A-CPG005M1

Axes control cable

(2 axis) Motion control units

CS1W-MC221 (1 cable needed)

CS1W-MC421 (2 cables needed)

1 m R88A-CPG001M2

2 m R88A-CPG002M2

3 m R88A-CPG003M2

5 m R88A-CPG005M2

Description Connect to motion control unit Model

Terminal block CS1W-MC221 - XW2B-20J6-6

CS1W-MC421 - XW2B-40J6-7

Cable form PLC unit to

terminal block. CS1W-MC221

CS1W-MC421 1 m XW2Z-100J-F1

Specifications Model

CX-One CX-One

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. I06E-EN-03A

Y203-EN2-04+MotionDrives+Cat.book Seite 46 Freitag, 21. Mai 2010 11:01 11

Andere Handbücher für CS1W-MC221 -

Dieses Handbuch passt für folgende Modelle

Andere Omron Steuereinheit Handbücher

Omron

Omron STI CM Series Bedienungsanleitung

Omron

Omron F3SN-A - Bedienungsanleitung

Omron

Omron CJ Series Bedienungsanleitung

Omron

Omron trajexia CJ1W-MCH72 Kurzanleitung

Omron

Omron CV500-MC221 Bedienungsanleitung

Omron

Omron CV500-MC221 Bedienungsanleitung

Omron

Omron SYSMAC C200H-PID01 Bedienungsanleitung

Omron

Omron CS1W-MCH71 - Bedienungsanleitung

Omron

Omron SYSMAC CJ1W-NC113 Bedienungsanleitung

Omron

Omron CJ1W-NC214 - Bedienungsanleitung

Omron

Omron CS1W-CLK12-V1 Bedienungsanleitung

Omron

Omron B5T-003 Bedienungsanleitung

Omron

Omron GX-JC06 Bedienungsanleitung

Omron

Omron CJ1W-TS562 Bedienungsanleitung

Omron

Omron GX-JC03 Bedienungsanleitung

Omron

Omron CS1W-MC221 - Bedienungsanleitung

Omron

Omron CQM1-SRM21-V1 Bedienungsanleitung

Omron

Omron F3SP-B1P Bedienungsanleitung

Omron

Omron CS1W-MCH Bedienungsanleitung

Omron

Omron ZEN Bedienungsanleitung

Omron

Omron MECHATROLINK-II CS1W-NCF71 Bedienungsanleitung

Omron

Omron C200HW Bedienungsanleitung

Omron

Omron SYSDRIVE 3G3FV-*-CUE Bedienungsanleitung

Omron

Omron NJ501-1400 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung