Omron NA-series Gebrauchsanweisung

Programmable Terminal NA-series

Practices Guide

NJ/NX Troubleshooter

For the Elementary Level

NA5-15W

□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

V423-E1-02

■ Introduction

This guide provides reference information on editing pages of the NA. It does not provide safety

information.

Be sure to obtain the NA-series Programmable Terminal User's Manuals, read and understand the safety

points and other information required for use, and test sufficiently before actually using the equipment.

transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or

otherwise, without the prior written permission of OMRON.

(2) No patent liability is assumed with respect to the use of the information contained herein. Moreover,

because OMRON is constantly striving to improve its high-quality products, the information contained

in this manual is subject to change without notice. Every precaution has been taken in the preparation

of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is

any liability assumed for damages resulting from the use of the information contained in this

publication.

(3) Trademarks

• Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan

and other countries for OMRON factory automation products.

• Windows, Visual Basic, and Excel are either registered trademarks or trademarks of Microsoft

Corporation in the United States, Japan, and other countries.

• Other company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

• Microsoft product screen shots reprinted with permission from Microsoft Corporation.

• The product pictures and drawings contained in this document are the graphical images, which may

be different from the actual articles.

Terms and Conditions Agreement

Warranty, Limitations of Liability

Warranties

Exclusive Warranty

Omron’s exclusive warranty is that the Products will be free from defects in materials and

workmanship for a period of twelve months from the date of sale by Omron (or such other period

expressed in writing by Omron). Omron disclaims all other warranties, express or implied.

Limitations

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED,

ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS

DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF

THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses

based on infringement by the Products or otherwise of any intellectual property right.

Buyer Remedy

Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form

originally shipped with Buyer responsible for labor charges for removal or replacement

thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or

credit Buyer an amount equal to the purchase price of the non-complying Product; provided

that in no event shall Omron be responsible for warranty, repair, indemnity or any other

claims or expenses regarding the Products unless Omron’s analysis confirms that the

Products were properly handled, stored, installed and maintained and not subject to

contamination, abuse, misuse or inappropriate modification. Return of any Products by

Buyer must be approved in writing by Omron before shipment. Omron Companies shall not

be liable for the suitability or unsuitability or the results from the use of Products in

combination with any electrical or electronic components, circuits, system assemblies or any

other materials or substances or environments. Any advice, recommendations or

information given orally or in writing, are not to be construed as an amendment or addition to

the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published

information.

Limitation on Liability; Etc

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL,

OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR

COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER

SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT

LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual price of the

Product on which liability is asserted.

Application Considerations

Suitability of Use

Omron Companies shall not be responsible for conformity with any standards, codes or

regulations which apply to the combination of the Product in the Buyer’s application or use

of the Product. At Buyer’s request, Omron will provide applicable third party certification

documents identifying ratings and limitations of use which apply to the Product. This

information by itself is not sufficient for a complete determination of the suitability of the

Product in combination with the end product, machine, system, or other application or use.

Buyer shall be solely responsible for determining appropriateness of the particular Product

with respect to Buyer’s application, product or system. Buyer shall take application

responsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO

LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS

BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS

PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL

EQUIPMENT OR SYSTEM.

Programmable Products

Omron Companies shall not be responsible for the user’s programming of a programmable

Product, or any consequence thereof.

Disclaimers

Performance Data

Data presented in Omron Company websites, catalogs and other materials is provided as a

guide for the user in determining suitability and does not constitute a warranty. It may

represent the result of Omron’s test conditions, and the user must correlate it to actual

application requirements. Actual performance is subject to the Omron’s Warranty and

Limitations of Liability.

Change in Specifications

Product specifications and accessories may be changed at any time based on

improvements and other reasons. It is our practice to change part numbers when published

ratings or features are changed, or when significant construction changes are made.

However, some specifications of the Product may be changed without any notice. When in

doubt, special part numbers may be assigned to fix or establish key specifications for your

application. Please consult with your Omron’s representative at any time to confirm actual

specifications of purchased Product.

Errors and Omissions

Information presented by Omron Companies has been checked and is believed to be

accurate; however, no responsibility is assumed for clerical, typographical or proofreading

errors or omissions.

Contents

Terms and Conditions Agreement........................................................................3

Warranty, Limitations of Liability.............................................................................................3

Application Considerations .....................................................................................................4

Disclaimers .............................................................................................................................4

Related Manuals .....................................................................................................6

１Outline.............................................................................................................7

２NJ/NX-series Troubleshooter Functions.....................................................8

２-１Controller Events and User Events..........................................................................8

２-２Active Events and Event Logs .................................................................................8

２-３Registering User Events ..........................................................................................9

３Description on Event Screens....................................................................11

３-１Active Events..........................................................................................................11

３-２Event Logs .............................................................................................................15

４Procedure to Start Up the NJ/NX Troubleshooter....................................19

Revision History ...................................................................................................20

Related Manuals

The following manuals are related to this manual.

Cat.No.

Model

Manual Name

W504

SYSMAC-SE2□□□

Sysmac Studio Version 1 Operation Manual

V117

NA5-15W□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

NA-

series Programmable Terminal Hardware User’s

Manual

V118 NA5-15W□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

NA-

series Programmable Terminal Software User’s

Manual

V119

NA5-15W□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

NA-

series Programmable Terminal Device Connection

User’s Manual

V120 NA5-15W□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

NA-series Programmable Terminal Startup Guide

１Outline

The troubleshooter function displays on the NA unit the controller errors of the CPU or other

units, with the use of the NJ/NX-series CPU unit’s function to monitor errors.

The troubleshooter screens are installed in the NA unit system. Thus, there is no need at all

for the users to create the conventional alarm screens using the graphic tool (i.e. to perform

the settings on Sysmac Studio) for NA. Moreover, the contents that are to be displayed as

“User Events” are to be registered in advance in “Event Settings” in Sysmac Studio, which

eliminates the need for setting alarms in the NA tool.

Sysmac Studio also has the same troubleshoot function as that of the NA unit.

Selecting [Tools]-[Troubleshooting…]-[Controller Event Log] displays the screen

shown below.

２NJ/NX-series Troubleshooter

Functions

The troubleshooter function allows you to confirm the “user-defined errors” and

“errors occurred in the controller or anywhere in the internal devices”, the

contents of the event logs, and the countermeasures against the errors. This

function is only available when connected to the NJ/NX-series controllers.

２-１Controller Events and User Events

On the Troubleshooter screen, you can confirm the active events and event logs

for the “Controller Events” as well as “User Events”.

１．User Events/User Event Logs

These are the errors and event logs that can be defined by the users with Sysmac Studio.

The users can also specify detailed information such as countermeasures against

troubles.

The errors caused by “instruction to cause a user error (SetAlarm)” or “instruction to

generate user information (Setinfo)” are displayed on the NA unit.

In and after NARuntime Ver.1.03, only for the user events, the detailed display can be

switched to a previously prepared screen (the function equivalent to NS).

２．Controller Events/Controller Event Logs

These are the fixed errors and event logs included in the NJ/NX-series controllers.

The users therefore cannot edit them.

The errors that occurred in the CPU units, NX-series slave terminals, EtherCAT slaves,

CJ units, or other devices are to be reported from the controller to the NA.

２-２Active Events and Event Logs

When you start up the NJ/NX Troubleshooter, the following screen appears.

You can switch the display between “Active Events” and “Event Logs” by the

tabs enclosed in the red dashed-line rectangle as shown below.

“Error” appears if there is an error. If there is no error, “Normal” appears.

２-３Registering User Events

in the Sysmac Studio for the NJ/NX controller.

Select and double-click

[Configurations and Setup]-[Event

Settings]. Otherwise, right-click on

it and select [Edit]. The “Event

Settings” tab page opens.

Click the icon at the left bottom

of the tab page.

cells for “Event Code/Event

Name/Event Level/Group/Details”.

・Event Code: １

・Event Name: Emergency Stop

Button Pressed

・Event Level: Emergency Stop

・Group: Safety

・Details: The emergency stop

button equipped on the control

panel was pressed.

If you create an Excel file like the

one shown on the right, you can

directly copy and paste the contents

to register them in “Event Settings”.

Note: Do not copy the header of

each column (i.e. Event Code,

Event Name, etc.).

Reference: Excel “event.xlsx”

Copy the contents of the Excel file

and paste them in “Event Settings”.

The contents of the Excel file are

now pasted in “Event Settings”.

Activate “the instruction to cause a

user error (SetAlarm)” or “the

instruction to generate user

information (SetInfo)” to cause a

user event.

Reference project:

NA_Trouble.smc2

Enter the “Event Code” number that

is set in “Event Settings” in

“AlarmNumber” or “InfoNumber”,

and set “AlarmSetTrigger” or

“InfoSetTrigger” to True. The

corresponding error appears on the

NA.

Andere Handbücher für NA-series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Controller Handbücher

Omron

Omron SYSMAC CJ Series Bedienungsanleitung

Omron

Omron G3ZA Bedienungsanleitung

Omron

Omron ACCURAX G5 - Bedienungsanleitung

Omron

Omron CJ1W-CTL41-E Bedienungsanleitung

Omron

Omron SYSMAC 3G8F7-CLK12-E Bedienungsanleitung

Omron

Omron Sysmac CJ1 Bedienungsanleitung

Omron

Omron R88D-GT series Bedienungsanleitung

Omron

Omron 61F-D21T-V1 Bedienungsanleitung

Omron

Omron SYSMAC C1000H Bedienungsanleitung

Omron

Omron E5AC Bedienungsanleitung

Omron

Omron C200HS Series Stücklistenhandbuch

Omron

Omron Q2A Series Bedienungsanleitung

Omron

Omron MECHATROLINK-II - Bedienungsanleitung

Omron

Omron Sysmac NX-series Bedienungsanleitung

Omron

Omron SYSMAC C series Bedienungsanleitung

Omron

Omron SYSMAC CS Series Bedienungsanleitung

Omron

Omron R88A-MCW151 Series Bedienungsanleitung

Omron

Omron sysmac EtherCAT NJ101 Series Bedienungsanleitung

Omron

Omron CP1E INTRODUCTION Bedienungsanleitung

Omron

Omron NJ-series Bedienungsanleitung

Omron

Omron NJ501-1300 Bedienungsanleitung

Omron

Omron E5CC Bedienungsanleitung

Omron

Omron NX-SID Series Bedienungsanleitung

Omron

Omron F3SX-E Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch