Omron SYSMAC NJ Series Bedienungsanleitung

Machine Automation Controller NJ/NX-series

EtherNet/IPTM

Connection Guide

HMS Industrial Networks AB

Anybus X-gateway EtherNet/IP Adapter

P746-E1-01

About Intellectual Property Rights and Trademarks

Microsoft product screen shot(s) used with permission from Microsoft.

Windows is a registered trademark of Microsoft Corporation in the USA and other countries.

ODVA and EtherNet/IPTM are trademarks of ODVA.

EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff

Automation GmbH, Germany.

Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other

countries for OMRON factory automation products.

Company names and product names in this guide are trademarks or registered trademarks of

their respective companies.

Table of Contents

1. Related Manuals ........................................................................................ 1

2. Terms and Definitions............................................................................... 2

3. Precautions................................................................................................ 3

4. Overview .................................................................................................... 4

5. Applicable Devices and Device Configuration ....................................... 5

5.1. Applicable Devices ................................................................................ 5

5.2. Device Configuration ............................................................................. 6

6. EtherNet/IP Settings .................................................................................. 8

6.1. Parameters ............................................................................................ 8

6.2. Global Variables .................................................................................... 9

6.3. Tag Sets .............................................................................................. 10

6.4. Connection Settings ............................................................................ 11

7. EtherNet/IP Connection Procedure........................................................ 12

7.1. Work Flow............................................................................................ 12

7.2. HMS X-gateway Setup ........................................................................ 14

7.3. Controller Setup................................................................................... 20

7.4. EtherNet/IP Communication Status Check .......................................... 37

8. Initialization Method ................................................................................ 39

8.1. Initializing a Controller ......................................................................... 39

9. Revision History ...................................................................................... 40

1．Related Manuals

1. Related Manuals

To ensure system safety, make sure you always read and follow the information provided in all

Safety Precautions and Precautions for Safe Use in the manuals for each device used in the

system.

The table below lists the manuals provided by HMS INDUSTRIAL NETWORKS AB

(hereinafter referred to as "HMS") and OMRON Corporation (hereinafter referred to as

"OMRON"), which pertain to this guide.

Manufacturer Cat. No. Model Manual name

OMRON W500 NJ501-□□□□

NJ301-□□□□

NJ101-□□□□

NJ-series CPU Unit

Hardware User's Manual

OMRON W535 NX701-□□□□ NX-series CPU Unit

Hardware User's Manual

OMRON W593 NX102-□□□□ NX-series

NX102 CPU Unit

Hardware User's Manual

OMRON W578 NX1P2-□□□□ NX-series

NX1P2 CPU Unit

Hardware User's Manual

OMRON W501 NX701-□□□□

NX102-□□□□

NX1P2-□□□□

NJ501-□□□□

NJ301-□□□□

NJ101-□□□□

NJ/NX-series

CPU Unit

Software User's Manual

Omron W506 NJ/NX-series

CPU Unit Built-in EtherNet/IPTM Port

User's Manual

OMRON W504 SYSMAC-SE2□□□ Sysmac Studio Version 1

Operation Manual

OMRON 0969584-7 W4S1-05□

W4S1-03B

Switching Hub

W4S1-series Users Manual

HMS HMSI-27-262 — Anybus® X-gatewayTM

User Manual

HMS HMSI-27-251 — Anybus® X-gateway Network Interface

Addendum

EtherNet/IPTM Adapter

Modbus®-TCP Server

HMS SP1747 — Anybus X-gateway

Gateway Installation Sheet

HMS SP1760 — Anybus X-gateway - EtherNet/IP

Adapter Interface

Network Installation Sheet

2．Terms and Definitions

2. Terms and Definitions

The terms and definitions used in this guide are given below.

Term

Explanation and Definition

node It refers to a relay point, a junction point or an end point on an

EtherNet/IP network made up of devices having an EtherNet/IP port.

A device with one EtherNet/IP port is recognized as one node and two

EtherNet/IP ports as two nodes on an EtherNet/IP network.

tag A unit that is used to exchange data with tag data links.

Data is exchanged between the local network variables and remote

network variables specified in the tags or between specified I/O memory

areas.

tag set When a connection is established, one or more tags (up to eight tags

including Controller status) are configured as a collective set of tags.

This is called a tag set. Each tag set represents a unit of data for one tag

data link connection. Tag data links are therefore created through a

connection between one tag set and another tag set.

A tag set name must be set for each tag set.

tag data links The standard EtherNet/IP implicit communications are called tag data

links. Tag data links enable cyclic tag data exchanges on an EtherNet/IP

network between Controllers or between Controllers and other devices.

connection It is used to exchange data as a unit within which data concurrency is

maintained.

connection type There are two kinds of connection types for tag data links.

One is a multi-cast connection, and the other is a unicast (point-to-point)

connection. The multi-cast connection sends an output tag set in one

packet to more than one node. The unicast connection separately sends

one output tag set to each node. Therefore, the multi-cast connection

can decrease the communications load if one output tag set is sent to

more than one node.

originator and target To make tag data links, it is necessary to open a connection between

nodes that perform tag data links. The node that requests the

connection is called the originator, and the node that receives the

request is called the target.

tag data link

parameters

The information that is set to make tag data links (including tags, tag

sets and connections) is called tag data link parameters.

EDS file A file that describes information unique to a device, such as the number

of I/O points for a specified EtherNet/IP device.

3．Precautions

3. Precautions

(1) Understand the specifications of devices which are used in the system. Allow some

margin for ratings and performance. Provide safety measures, such as installing a safety

circuit, in order to ensure safety and minimize the risk of abnormal occurrence.

(2) To ensure system safety, make sure you always read and follow the information provided

in all Safety Precautions and Precautions for Safe Use in the manuals for each device

used in the system.

(3) The user is encouraged to confirm the standards and regulations that the system must

conform to.

(4) It is prohibited to copy, to reproduce, and to distribute a part or the whole of this guide

without the permission of OMRON Corporation.

(5) The information contained in this guide is current as of May 2021. It is subject to change

for improvement without notice.

The following notations are used in this guide.

Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury, or may result in serious

injury or death. Additionally, there may be significant property

damage.

Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury or property damage.

Precautions for Correct Use

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation easier.

Symbol

The filled circle symbol indicates operations that you must do.

The specific operation is shown in the circle and explained in the text.

This example shows a general precaution for something that you must do.

4．Overview

4. Overview

This guide describes procedures for connecting an HMS Anybus X-gateway EtherNet/IP

Adapter (hereinafter referred to as the "X-gateway") and an OMRON NJ/NX-series Machine

Automation Controller (hereinafter referred to as the "Controller") via EtherNet/IP and for

checking their communication status.

Refer to Section 6. EtherNet/IP Settings and Section 7. EtherNet/IP Connection Procedure to

understand setting methods and key points to operate EtherNet/IP tag data links.

5．Applicable Devices and Device Configuration

5. Applicable Devices and Device Configuration

5.1. Applicable Devices

The applicable devices are as follows:

Manufacturer Name Model

OMRON

NJ/NX-series CPU Unit

NX701-□□□□

NX102-□□□□

NX1P2-□□□□

NJ501-□□□□

NJ301-□□□□

NJ101-□□□□

HMS Anybus X-gateway EtherNet/IP Adapter －

Precautions for Correct Use

In this guide, the devices with models and versions listed in 5.2. Device Configuration are

used as examples of applicable devices to describe the procedures for connecting the

devices and checking their connection.

You cannot use devices with versions lower than those listed in 5.2.

To use the above devices with models not listed in 5.2 or versions higher than those listed in

5.2, check the differences in the specifications by referring to the manuals before operating

the devices.

Additional Information

This guide describes the procedures for establishing the network connection.

It does not provide information on operation, installation, wiring method, device functionality,

or device operation, which is not related to the connection procedures.

Refer to the manuals or contact the manufacturers of the applicable devices for other

information.

5．Applicable Devices and Device Configuration

5.2. Device Configuration

The hardware components to replicate the connection procedures in this guide are as follows:

Manufacturer

Name

Model

Version

OMRON

NX-series CPU Unit

(built-in EtherNet/IP port)

NX102-1200

Ver.1.42

OMRON

Switching hub

W4S1-05C

Ver.1.0

OMRON

Sysmac Studio

SYSMAC-SE2□□□

Ver.1.43

－

PC (OS: Windows 10)

－

LAN cable

(STP (shielded, twisted-pair) cable of

Ethernet category 5 or higher)

－

HMS

Anybus X-gateway EtherCAT Slave -

EtherNet/IP Adapter

AB7682

Ver.3.29

HMS EDS file 005A000C004B0300.eds

Ver.1.7

HMS HMS IPconfig －Ver.4.2.0.0

HMS

Anybus Configuration Manager - X-

gateway

－Ver.1.5.1.1

HMS

USB cable

(USB 2.0-compliant, B connector)

(supplied with X-gateway)

－

Power supply (24 VDC for Controller)

－

Power supply

(24 VDC for switching hub)

－

Power supply (24 VDC for X-gateway)

－

Precautions for Correct Use

Contact HMS INDUSTRIAL NETWORKS AB to obtain the EDS file specified above before

proceeding.

Precautions for Correct Use

Update Sysmac Studio to the version 1.43 or to a higher version. If you use a version higher

than the one specified, the procedures and related screenshots described in Section 7 and

the subsequent sections may not be applicable. In that case, use the equivalent procedures

described in this guide by referring to the Sysmac Studio Version 1 Operation Manual (Cat.

No. W504).

X-gateway

Power supply

NX102-1200

(built-in EtherNet/IP port 1)

PC (Sysmac Studio,

HMS IPconfig and

Anybus Configuration

Manager - X-gateway

installed,

OS: Windows 10)

USB cable

Power supply

W4S1-05C

LAN cable

Power supply

5．Applicable Devices and Device Configuration

Additional Information

For information on the power supply specifications of the Controller, refer to the NX-series

NX102 CPU Unit Hardware User's Manual (Cat. No. W593).

Additional Information

For information on the power supply specifications of the switching hub, refer to the Switching

Hub W4S1-series Users Manual (Cat. No. 0969584-7).

Additional Information

For information on the power supply specifications of the X-gateway, refer to the Anybus® X-

gatewayTM User Manual (HMSI-27-262).

Andere Handbücher für SYSMAC NJ Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Controller Handbücher

Omron

Omron E5EZ-PRR Series Bedienungsanleitung

Omron

Omron CPM1A Bedienungsanleitung

Omron

Omron NE1A-SCPU02 Bedienungsanleitung

Omron

Omron T20 Bedienungsanleitung

Omron

Omron R88D-1SN10F-ECT Bedienungsanleitung

Omron

Omron C200HS Series Stücklistenhandbuch

Omron

Omron NX-EIC202 Bedienungsanleitung

Omron

Omron YRC Bedienungsanleitung

Omron

Omron HOME SECURITY SYSTEM - MOTION SENSOR... Bedienungsanleitung

Omron

Omron SYSMAC Gateway Bedienungsanleitung

Omron

Omron E5AR-T Bedienungsanleitung

Omron

Omron E5EN Bedienungsanleitung

Omron

Omron E5AK-AA2-500 AC/DC24 Bedienungsanleitung

Omron

Omron CJ1W-CT021 Installationshandbuch

Omron

Omron TJ1-MC04 Betriebsanleitung

Omron

Omron ZS-MDC Bedienungsanleitung

Omron

Omron NX Series Bedienungsanleitung

Omron

Omron 61F-GPN-BC Bedienungsanleitung

Omron

Omron sysmac EtherNet/IP NJ Series Bedienungsanleitung

Omron

Omron TRAJEXIA-PLC Bedienungsanleitung

Omron

Omron E5CK Bedienungsanleitung

Omron

Omron F3SP-U2P Bedienungsanleitung

Omron

Omron C200HX Series Stücklistenhandbuch

Omron

Omron C20H Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch