Omron 3G3RX-V1 Series Bedienungsanleitung

CJ-series

DeviceNet™ Connection Guide

OMRON Corporation

3G3RX-V1 Series Inverter

P547-E1-01

About Intellectual Property Rights and Trademarks

Microsoft product screen shots reprinted with permission from Microsoft Corporation.

Windows is a registered trademark of Microsoft Corporation in the USA and other countries.

ODVA and DeviceNet™ are trademarks of ODVA.

Company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

Table Of Contents

1. Related Manuals........................................................................................ 1

2. Terms and Definitions............................................................................... 1

3. Remarks..................................................................................................... 2

4. Overview .................................................................................................... 4

5. Applicable Products and Support Software............................................ 4

5.1. Applicable Products............................................................................... 4

5.2. Device Configuration............................................................................. 5

6. Connection Procedure.............................................................................. 7

6.1. Unit Setting Example............................................................................. 7

6.2. Work Flow.............................................................................................. 9

6.3. Setting Up the Inverter......................................................................... 10

6.4. Setting Up the DeviceNet .................................................................... 17

6.5. Connection Status Check.................................................................... 33

7. Initialization Method................................................................................ 40

7.1. PLC ..................................................................................................... 40

7.2. Inverter ................................................................................................ 41

8. Revision History...................................................................................... 42

1．Related Manuals

1. Related Manuals

The table below lists the manuals that relate to this document.

To ensure system safety, make sure to always read and heed the information provided in all

Safety Precautions, Precautions for Safe Use, and Precaution for Correct Use of manuals for

each device which is used in the system.

Cat.No. Model Manual Name

W472 CJ2H-CPU6[]

CJ2M-CPU[][] CJ-series CJ2 CPU Unit Hardware User's Manual

W473 CJ2H-CPU6[]

CJ2M-CPU[][] CJ-series CJ2 CPU Unit Software User's Manual

W267 - DeviceNet™ Operation Manual

W380 CJ1W-DRM21 CJ-series DeviceNet™ Unit Operation Manual

W446 - SYSMAC CX-Programmer Operation Manual

W464 - SYSMAC CX-Integrator Operation Manual

I578 3G3RX-[][][][][]-V1 RX Series Type V1 High-function General-purpose

Inverter User's Manual

I581 3G3AX-RX-DRT-E MX2/RX Series DeviceNet Communications Unit

User's Manual

2. Terms and Definitions

Term Explanation and Definition

Master/Slave A master is a unit that controls the DeviceNet communications.

A master sends output data to multiple slaves and receives input data

from the slaves.

Slaves receive output data that are sent from the master, and send input

data to the master.

At least one master is required for DeviceNet communications.

EDS file An EDS file is a file that contains the I/O points of DeviceNet slave units

and the parameters that can be set via DeviceNet.

Node address

(MAC ID) A node address is an address to identify a unit connected to a DeviceNet

network.

With DeviceNet, a MAC (Media Access Control) ID is used as a node

address. Thus, a node address is a MAC ID.

Scan list A scan list is used to register slaves with which a master communicates

in DeviceNet remote I/O communications. A master communicates with

the slaves based on the scan list settings.

3．Remarks

3. Remarks

(1) Understand the specifications of devices which are used in the system. Allow some

margin for ratings and performance. Provide safety measures, such as installing safety

circuit in order to ensure safety and minimize risks of abnormal occurrence.

(2) To ensure system safety, always read and heed the information provided in all Safety

Precautions, Precautions for Safe Use, and Precaution for Correct Use of manuals for

each device used in the system.

(3) The user is encouraged to confirm the standards and regulations that the system must

conform to.

(4) It is prohibited to copy, to reproduce, and to distribute a part of or whole part of this

document without the permission of OMRON Corporation.

(5) The information contained in this document is current as of January 2013. It is subject to

change without notice for improvement.

3．Remarks

The following notation is used in this document.

Indicates a potentially hazardous situation which, if not avoided,

will result in minor or moderate injury, or may result in serious

injury or death. Additionally there may be significant property

damage.

Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury or in property damage.

Precautions for Safe Use

Precautions on what to do and what not to do to ensure safe usage of the product.

Application precautions

Precautions on what to do and what not to do to ensure proper operation and performance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation easier

4．Overview

4. Overview

This document describes the procedure for connecting the Inverter (3G3RX-V1 series) of

OMRON Corporation (hereinafter referred to as OMRON) to the DeviceNet Unit and provides

the procedure for checking their connection.

Refer to Section 6 Connection Procedure to understand the setting method and key points to

connect the devices via DeviceNet.

5. Applicable Products and Support Software

5.1. Applicable Products

The applicable devices are as follows:

Manufacturer Name Model Version

OMRON DeviceNet Unit (Master) CJ1W-DRM21

OMRON CJ1-series CPU Unit

CJ2-series CPU Unit CJ1[]-CPU[][]

CJ2[]-CPU[][]

OMRON Inverter 3G3RX –[][][][][]-V1

OMRON DeviceNet Communications Unit 3G3AX-RX-DRT-E

Versions listed in

Section 5.2 or

higher versions

Precautions for Correct Use

As applicable devices above, the devices with the models and versions listed in Section 5.2.

are actually used in this document to describe the procedure for connecting devices and

checking the connection.

You cannot use devices with versions lower than the versions listed in Section 5.2.

To use the above devices with versions not listed in Section 5.2 or versions higher than those

listed in Section 5.2, check the differences in the specifications by referring to the manuals

before operating the devices.

Additional Information

This document describes the procedure to establish the network connection. Except for the

connection procedure, it does not provide information on operation, installation or wiring

method. It also does not describe the functionality or operation of the devices. Refer to the

manuals or contact your OMRON representative.

5．Applicable Products and Support Software

5.2. Device Configuration

The hardware components to reproduce the connection procedure of this document are as

follows:

USB cable

Personal computer

(CX-One installed,

OS: Windows XP)

CJ2M-CPU12 +

CJ1W-DRM21

DeviceNet cable

3G3RX-A2055-V1 +

3G3AX-RX-DRT-E

T-branch Tap (DCN1-1C)

Manufacturer Name Model Version

OMRON DeviceNet Unit (Master) CJ1W-DRM21 Ver.1.1

OMRON CJ2 CPU Unit CJ2M-CPU12 Ver.2.0

OMRON Power Supply Unit CJ1W-PA202

OMRON DeviceNet cable DCA1-5C10

OMRON T-branch Tap DCN1-1C

OMRON CX-One CXONE-AL[][]C-V4

/AL[][]D-V4 Ver.4.[][]

OMRON CX-Programmer (Included in CX-One) Ver.9.41

OMRON CX-Integrator (Included in CX-One) Ver.2.55

- USB cable -

- Personal computer

(OS: Windows XP) -

OMRON Inverter 3G3RX -A2055-V1

OMRON DeviceNet Communications Unit 3G3AX-RX-DRT-E

Precautions for Correct Use

Update the CX-Programmer and CX-Integrator to the version specified in this section or

higher version using the auto update function. If a version not specified in this section is used,

the procedures described in Section 6 and subsequent sections may not be applicable. In

that case, use the equivalent procedures described in the SYSMAC CX-Programmer

Operation Manual (Cat.No. W446) and SYSMAC CX-Integrator Operation Manual (Cat. No.

W464).

Additional Information

For information on the DeviceNet cable and network wiring, refer to Chapter 2 Network

Configuration and Wiring of the DeviceNet Operation Manual (Cat. No. W267).

Connect a terminating resistance to each end of the trunk line of the DeviceNet.

5．Applicable Products and Support Software

Additional Information

The system configuration in this document uses USB for the connection between the

personal computer and CJ2.

For information on how to install the USB driver, refer to A-5 Installing the USB Driver in the

CJ2 CPU Unit Hardware User's Manual (Cat. No. W472).

6．Connection Procedure

6. Connection Procedure

6.1. Unit Setting Example

This section explains the procedure for connecting the DeviceNet Unit.

This document explains the procedures for setting up the DeviceNet Unit and Inverter from the

factory default setting. For information on how to initialize each device, refer to Section 7

Initialization Method.

6.1.1. Settings

The settings for the DeviceNet Unit and Inverter are shown below.

DeviceNet Unit Inverter

Unit number 0 -

Node address (MAC ID) 63 0

Baud rate (bps) 500kbps (Automatically follows the Master Unit)

Remote I/O - 1 (Extended Speed I/O)

6.1.2. I/O Memory Area Allocation

The memory area of the PLC is allocated to the Inverter as shown below.

Output area 4 bytes

(PLC →Inverter) Input area 4 bytes

(Inverter →PLC）

3200 Command 3300 Status information

3201 Rotation Speed

Reference 3301 Rotation Speed Monitor

■Output format Bit allocation

Word 15 14 13 12 11 10 987654 3 2 1 0

3200 - - - - - - - - - REFCTR - - RS RV FW

3201 Rotation Speed Reference

Andere Handbücher für 3G3RX-V1 Series

Inhaltsverzeichnis

Andere Omron Wechselrichter Handbücher

Omron

Omron 3G3MX2 Series Bedienungsanleitung

Omron

Omron SYSDRIVE 3G3JV Bedienungsanleitung

Omron

Omron RX Series Bedienungsanleitung

Omron

Omron RX Series Bedienungsanleitung

Omron

Omron JZA Bedienungsanleitung

Omron

Omron RX - 2 Bedienungsanleitung

Omron

Omron JX Series Bedienungsanleitung

Omron

Omron CIMR-L7Z - Bedienungsanleitung

Omron

Omron SYSDRIVE 3G3EV-A-CUE Bedienungsanleitung

Omron

Omron SYSDRIVE MX2 SERIES Bedienungsanleitung

Omron

Omron SYSDRIVE 3G3XV-EV2 Series Bedienungsanleitung

Omron

Omron Q2A Series Bedienungsanleitung

Omron

Omron KP100L-OD - 12-2010 Bedienungsanleitung

Omron

Omron KP40G - Bedienungsanleitung

Omron

Omron SYSDRIVE 3G3JV Gebrauchs- und Pflegehandbuch

Omron

Omron SYSDRIVE 3G3JVS ERIES Bedienungsanleitung

Omron

Omron VS mini J7 Bedienungsanleitung

Omron

Omron SYSDRIVE 3G3EV SERIES Bedienungsanleitung

Omron

Omron SYSDRIVE 3G3FV CE Series Bedienungsanleitung

Omron

Omron 3G3MX2 Series Bedienungsanleitung

Omron

Omron 3G3M1-STD Bedienungsanleitung

Omron

Omron V7 Bedienungsanleitung

Omron

Omron JZA24P0BAA Bedienungsanleitung

Omron

Omron CIMR-V7AZ - Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung