Omron TM Bedienungsanleitung

Omron TM Collaborative Robot: Backup, Restore, and Update – Ver. 1

QUICK START GUIDE

Omron TM Collaborative Robot:

Backup, Restore, and Update

Omron TM Collaborative Robot: Backup, Restore, Update – Ver. 1 Page 2 of 9

Contents

1 Introduction ............................................................................................................................................... 3

2 Useful Documents...................................................................................................................................... 3

3 Backup........................................................................................................................................................ 3

3.1 Procedure............................................................................................................................................ 3

3.2 Recommended Backup Points.......................................................................................................... 4

4 Restore ....................................................................................................................................................... 5

5 USB Flash Drive Formatting ....................................................................................................................... 6

6 Update........................................................................................................................................................ 8

Figures

Figure 3.1 - System Setting Menu................................................................................................................. 3

Figure 3.2 - Backup Screen............................................................................................................................ 4

Figure 4.1 - Restore Screen ........................................................................................................................... 5

Figure 5.1 - Format........................................................................................................................................ 6

Figure 4.2 - Formatting Convention.............................................................................................................. 7

Figure 5.3 - Format Warning......................................................................................................................... 7

Figure 5.4 - Formatting Complete................................................................................................................. 7

Figure 5.5 - Folder Naming Convention ........................................................................................................ 7

Figure 6.1 - Included Files ............................................................................................................................. 8

Figure 6.2 - System Setting Menu................................................................................................................. 8

Figure 6.3 - System Version Screen............................................................................................................... 9

Figure 6.4 - Version Conflict Warning ........................................................................................................... 9

Version

Date

Author

Changes

HW Ver.

Sys. Ver.

1/17/2019

Kai Lee

Aaron H

Charlie K

Document Created

3.0

1.68.6800

Omron TM Collaborative Robot: Backup, Restore, Update – Ver. 1 Page 3 of 9

1Introduction

This demonstrates how to back up the current system version of an Omron TM robot, how to restore

the robot to a previous system version, and how to update the firmware to a newer system version.

2Useful Documents

The ADE Team strongly recommends reviewing the following documents in addition to this one:

TM Flow Software Manual

I626-E-02

TM Initial Startup Tech Note

Document number TBD

In addition to the documents listed above, all Omron TM related downloads can be found at:

https://industrial.omron.us/en/products/tm-series#downloads

3Backup

In some cases, the Omron TM robot must be restored to a former system version. However, it is entirely

the user’s responsibility to regularly keep a good set of backup points to which the robot can be

restored. It is also important to note that restoring the robot to a previous system version is currently

the only method to “downgrade” the robot, as the Update function only

3.1 Procedure

1. Go to Backup\ Restore in the System menu.

a. Click on the Backup button so that it is highlighted green.

b. Enter a file name.

c. Click on the blue Backup button.

Figure 3.1 - System Setting Menu

Omron TM Collaborative Robot: Backup, Restore, Update – Ver. 1 Page 4 of 9

Figure 3.2 - Backup Screen

2. The following will be backed up:

a. Firmware

b. Projects

c. Settings – TCP's, robot parameters, etc.

A maximum of three backup points are allowed.To delete a backup point, click on the Restore button

and then click the delete button, marked by an X in a red box.

3.2 Recommended Backup Points

Since only 3 backup points are allowed, therefore the ADE team’s suggested backup points are:

1. Upon initial setup (to retain a copy of the factory default settings).

2. After commissioning is complete.

3. Before updating to a new version of the firmware or before trying anything irreversible.

Omron TM Collaborative Robot: Backup, Restore, Update – Ver. 1 Page 5 of 9

4Restore

To restore everything in the selected backup file;

a. Click the Restore button so that it is highlighted green.

b. Choose the file you want to restore.

c. To keep the current firmware, make sure to uncheck the box next to Restore Robot Firmware.

d. Click the blue Restore button in the lower right corner.

Figure 4.1 - Restore Screen

CAUTION: Do not remove power during the backup and restore process

Omron TM Collaborative Robot: Backup, Restore, Update – Ver. 1 Page 6 of 9

5USB Flash Drive Formatting

1. Plug a USB flash drive into an empty USB port on your computer.

2. Right click on the USB drive name in the Windows Explorer menu on the left side of the screen,

the click on Format… This brings up the Format window.

Figure 5.1 - Format

Omron TM Collaborative Robot: Backup, Restore, Update – Ver. 1 Page 7 of 9

3. Choose the NTFS file system

4. Change the Volume label to “TMROBOT”. The volume label

must match this name exactly.

5. Check the Quick Format box.

6. Click Start.

7. A pop-up window will display with a warning that you are

erasing ALL data from the USB flash drive. Click OK.

Figure 5.3 - Format Warning

8. Once the formatting is complete, a pop-up window will display “Format Complete”. Click OK to

finish the formatting procedure.

Figure 5.4 - Formatting Complete

9. The folder naming convention within the USB drive is very important. Follow the naming

convention shown below in figure 4.5.

Figure 5.5 - Folder Naming Convention

Figure 5.2 - Formatting Convention

Omron TM Collaborative Robot: Backup, Restore, Update – Ver. 1 Page 8 of 9

6Update

The following steps detail how to update the robot’s System Version.

1. The latest version of TM Flow can be found on Omron’s website at

https://industrial.omron.us/en/products/tm-series.

2. Unzip the update file into the root directory of your newly formatted TM USB flash drive.

Figure 6.1 - Included Files

3. Plug the USB flash drive into a USB port on the robot controller.

4. Go to System Update in Setting

Figure 6.2 - System Setting Menu

Omron TM Collaborative Robot: Backup, Restore, Update – Ver. 1 Page 9 of 9

5. If the system recognizes the TM Flow file on the USB drive, a .tmr file like in the figure below.

Note that the clicking OK will result in an error if the file version of TM Flow is older than the

current System Version. To “downgrade” the robot, it must be restored to a backup System

Version.

Figure 6.3 - System Version Screen

6. Click OK to update the system.

a. CAUTION: Do not click anything or remove the USB until the update has finished and

the controller has completely shut down.

b. The robot will shut down completely after the update is done.

7. Manually restart the robot and the update will be finished.

a. Press the power button on the robot stick.

b. If the robot does not power on with the robot stick, or if the indicator light on the robot

becomes a fast-blinking red, it may be necessary to manually power cycle the control

box (turning the power supply off then on again).

8. Update the version of TM Flow on all Windows devices that control the robot (i.e. a laptop).

a. A version conflict error message will occur if the software version of TM Flow on a

Windows device does not match the system version in the robot.

b. The old version of TM Flow on the Windows device must be uninstalled before installing

the new version. Errors will occur if this step is neglected.

Figure 6.4 - Version Conflict Warning

Controllers & I/O

• Machine Automation Controllers (MAC) • Motion Controllers

• Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O

Robotics

• Industrial Robots • Mobile Robots

Operator Interfaces

• Human Machine Interface (HMI)

Motion & Drives

• Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems

• Frequency Inverters

Vision, Measurement & Identification

• Vision Sensors & Systems • Measurement Sensors • Auto Identification Systems

Sensing

• Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors

• Rotary Encoders • Ultrasonic Sensors

Safety

• Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems

• Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices

• Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays

Control Components

• Power Supplies • Timers • Counters • Programmable Relays

• Digital Panel Meters • Monitoring Products

Switches & Relays

• Limit Switches • Pushbutton Switches • Electromechanical Relays

• Solid State Relays

Software

• Programming & Configuration • Runtime

Printed on recycled paper.

OMRON CANADA, INC. • HEAD OFFICE

Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com

OMRON ELECTRONICS DE MEXICO • HEAD OFFICE

México DF • 52.

55.59.01.43.00

• 01-800-226-6766 • [email protected]

OMRON ELECTRONICS DE MEXICO • SALES OFFICE

Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • [email protected]

OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE

São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br

OMRON ARGENTINA • SALES OFFICE

Cono Sur • 54.11.4783.5300

OTHER OMRON LATIN AMERICA SALES

54.11.4783.5300

OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

Authorized Distributor:

Inhaltsverzeichnis

Andere Omron Robotik Handbücher

Omron

Omron Techman Robot Benutzerhandbuch

Omron

Omron CR-UGD4MINI Series Bedienungsanleitung

Omron

Omron TM5 Regular Payload Series Montageanleitung

Omron

Omron TM12 Series Handbuch

Omron

Omron XG Series Bedienungsanleitung

Omron

Omron i4-350L Bedienungsanleitung

Omron

Omron Hornet 565 Bedienungsanleitung

Omron

Omron R6Y Series Bedienungsanleitung

Omron

Omron LD-60 Bedienungsanleitung

Omron

Omron i4L Series Bedienungsanleitung

Omron

Omron Hornet 565 Bedienungsanleitung

Omron

Omron LD-60 Bedienungsanleitung

Omron

Omron i4H Bedienungsanleitung

Omron

Omron V500-R2 Series Bedienungsanleitung

Omron

Omron Scara R6Y - XP Series Bedienungsanleitung

Omron

Omron F160 Vision Sensor Benutzerhandbuch

Omron

Omron TM5-700 Bedienungsanleitung

Omron

Omron CR UGD4 XL Series Bedienungsanleitung

Omron

Omron HD Benutzerhandbuch

Omron

Omron SCARA XE Series Bedienungsanleitung

Omron

Omron LD-250 Bedienungsanleitung

Omron

Omron Hornet 565 Bedienungsanleitung

Omron

Omron iX4 Bedienungsanleitung

Omron

Omron CR UGD4 Series Bedienungsanleitung

Beliebte Robotik Handbücher anderer Marken

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Bedienungsanleitung

SunFounder

SunFounder PiDog Bedienungsanleitung

Universal Robots

Universal Robots UR5 Bedienungsanleitung

Universal Robots

Universal Robots E Series Bedienungsanleitung

YASKAWA

YASKAWA MOTOMAN-MPL80 II Bedienungsanleitung

EFORT

EFORT ECR5 Gebrauchsanweisung

Epson

Epson C8 Series Bedienungsanleitung

WowWee

WowWee ROBOQUAD Bedienungsanleitung

Milvus Robotics

Milvus Robotics SEIT 100 Bedienungsanleitung

RoboMaster

RoboMaster AI Robot 2020 Standard Version Bedienungsanleitung

fischertechnik

fischertechnik Mini Bots Bedienungsanleitung

YASKAWA

YASKAWA MA2010 Handbuch

Abicor Binzel

Abicor Binzel iCAT mini Bedienungsanleitung

ABB

ABB OmniCore E10 Bedienungsanleitung

YASKAWA

YASKAWA Motoman DX200 Bedienungsanleitung

pitsco

pitsco Tetrix Max Bedienungsanleitung

ECOVACS

ECOVACS DEEBOT R95 Bedienungsanleitung

Feng Yuan

Feng Yuan Interstellar Warrior Bedienungsanleitung