Omron CX-PROCESS TOOL - INTRODUCTION GUIDE Referenzhandbuch

INTRODUCTION GUIDE

CX-Process Tool

Cat. No. R143-E1-01

The CX-Process Tool Operation Manual is included as a PDF file

on the CX-One CD-ROM under OMRON/CX-One/CX-Process

Tool. Be sure to read the Precautions and other information at the

beginning of the manual before using the CX-Process Tool.

This CX-Process Tool Introduction Guide describes basic

operating procedures for the CX-Process Tool. For application

precautions and detailed descriptions, refer to the Help or the PDF

Operation Manual.

Note: Acrobat Reader 4.0 or higher is required to display the PDF file.

sa PDF file

CX-Process

mation at the

Tool.

ribes basic

application

por the PDF

The CX-Process Tool

A Loop Controller is a Controller that has the functionality of multiple high-

performance Controllers. Combining function blocks that form functional

components enables programming control without restrictions for analog values,

such as temperatures, pressures, and flowrates.

Programming with the CX-Process Tool enables graphical engineering to paste

function blocks and connect lines with the mouse. The system also has the

following features compared with single-loop controllers and dedicated temperature

controllers.

1. The system is based on PLCs, so a wide variety of PLC Units, such as Process

I/O Units, Analog I/O Units, and Communications Units, can be used.

2. Data can be exchanged with the ladder-programmed CPU Unit at a high speed

without any programming, so loop control programming can be coordinated with

sequence control.

3. Changes, such as increasing or decreasing the number of loops and changing

the control methods, can also be flexibly performed by combining function

blocks.

A simple example of programming for one-loop temperature control will be

presented as a sample in this Introduction Guide. Function blocks can also be

combined for multi-loop control, cascade control, heating/cooling control, and

program control.

CONTENTS

Overview

SECTION 1

Example System

System Configuration

Starting the CX-Process Tool 1-2

1-2

1-4

1-5

1-8

1-9

1-12

1-14

1-15

1-16

1-19

2-2

2-6

1-1

2-1

Creating Function Block Data

Creating Simple Function Block Data

for the Loop Controller

SECTION 2

Appendix

Making the NS-series PT Screen

for the Loop Controller

Useful Functions

Setting the CSV Tags in Advance

Automatically Creating the NS-series PT Screen for the Loop Controller

Displaying the NS-series PT Screen for the Loop Controller

Making a New Project

Registering the Loop Controller

Creating Function Block Data

Connecting Function Blocks

Set ITEMs for Function Blocks

Communications Settings between Computer and PLC

Transferring Function Block Data to the Loop Controller

Starting Operation

PID Tuning

Uploading and Saving Function Block Data

Overview

Example

System

PID

SCR

System Configuration

●This system controls one loop.

- A type K thermocouple is used for the temperature sensor input.

- The temperature range is 0.0 to 500.0°C.

The output is 4 to 20 mA and heater control is performed using a Thyristor Unit (Power Controller).

- Continuous proportional PID is set.

Note: The default operation cycle (1 s) is used.

●

The screen for the Loop Controller is displayed by connecting a NS-series PT (Touch Panel).

Thyristor Unit

(Power Controller)

G3PX

Screen for Loop Controller

NS-series PT

(Touch Panel)

NS12

CX-Process Tool

(Support Software)

Cable (2 m) for

Peripheral Bus (Toolbus)

CS1W-CN226

RS-232C Cable

XW2Z-200T (2 m)

CJ-series Loop-control

CPU Unit

CJ1G-CPU45P

Analog Output Unit

CJ1W-DA041

Temperature sensor

Type K thermocouple 4 to 20 mA

Input 1 Output 1

Note: The Loop

Controller it-

self does not

have analog

I/O. Therefore,

PLC CPU Bus

Units must be

used.

the

The

Inpu

CJ1

This section provides an explanation of basic CX-Process Tool operation

using the following simple system as an example.

Isolated-type Ther-

mocouple Input Unit

CJ1W-PTS51

Refer to Creating Function

Block Data on the

following page.

Function Block Data

Analog Output Unit

CJ1W-DA041

Loop Controller

(in CJ-series CJ1G-CPU45P Loop-control CPU Unit)

ore,

Bus

To simplify descriptions, operations for startup settings at the PLC

(such as creating I/O tables (see note) and setting DM Area words

allocated to Analog I/O Units) is not included in the following

description of operations for the CX-Process Tool. Be sure to

separately make the settings using the CX-Programmer.

Note: With CJ-series Loop-control CPU Units, I/O tables can be automatically generated

based on the mounted Units when the power supply is turned ON without

performing the operation to create I/O tables. (With CS-series CPU Units, an

operation must be performed to create the I/O tables.)

Type K

thermocouple

4 to 20 mA

Thermocouple

Input Unit

CJ1W-PTS51

Creating Function Block Data

Field Terminal Block for

Analog Input (Isolated

Ai 4-point Terminal

(PTS51)) (Block Model

566)

Inputs the analog signal

from the CJ1W-PTS51.

Control Block for PID

Control (Basic PID)

(Block Model 011)

Performs PID

calculations.

Field Terminal Block for

Analog Output (Ao 4-

point Terminal (DA041)

(Block Model 587)

Outputs the analog

signal from the CJ1W-

DA041.

1-1

This section presents the flow of operations for

starting the CX-Process Tool (Support

Software), inputting the thermocouple, creating

function block data for one PID loop with an

output of 4 to 20 mA, downloading the data to

the Loop Controller, tuning PID control, and

saving files.

Creating Simple

Function Block Data

for the Loop

Controller

1-2

1. Select CX-Process Tool.

Starting the CX-Process Tool/Making a New Project

Starting the CX-Process Tool

Making a New Project

First, make a project.

2-1. Make a new project.

Starting the CX-Process Tool

Making a New Project

Creating Simple Function Block Data for

the Loop Controller

From the Start Menu, select All

Programs -OMRON -CX-One -CX-

Process Tool -CX-Process Tool to

start the CX-Process Tool.

The window at the right will open when

the CX-Process Tool starts.

Click the Make a New Function Block

File Button to make a new project.

Select

data, a

The win

the OK

project

The fold

was ent

will be c

(called t

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Software Handbücher

Omron

Omron CX-ONE - BROCHURE 1 Bedienungsanleitung

Omron

Omron CJ2*-CPU Series Bedienungsanleitung

Omron

Omron NS-CXDC1-V1 Bedienungsanleitung

Omron

Omron NT - SUPPORT TOOL FOR WINDOWS V4 Bedienungsanleitung

Omron

Omron WS02-NCTC1-E - 07-2001 Bedienungsanleitung

Omron

Omron WS02-NSFC1-EV3 - 12-2007 Bedienungsanleitung

Omron

Omron CX-ONE - INTRODUCTION GUIDE Referenzhandbuch

Omron

Omron FLEXXPECT-PICKING Bedienungsanleitung

Omron

Omron NT - SUPPORT TOOL FOR WINDOWS 95-98 V3.2 Bedienungsanleitung

Omron

Omron CX-PROGRAMMER 5 Bedienungsanleitung

Omron

Omron CX-SUPERVISOR V3 Bedienungsanleitung

Omron

Omron FLEXXPECT-GLUE BEAD Bedienungsanleitung

Omron

Omron NT-series Bedienungsanleitung

Omron

Omron WS02-SIMC1-E - V1.9 REV 12-2009 Bedienungsanleitung

Omron

Omron WS02-NCTC1-E - 07-2001 Bedienungsanleitung

Omron

Omron NS-RUNTIME - SOFTWARE 2007 Bedienungsanleitung

Omron

Omron HEALTH MANAGEMENT - SOFTWARE VERSION 1-3 -... Bedienungsanleitung

Omron

Omron NT - SUPPORT TOOL 07-1995 Bedienungsanleitung

Omron

Omron CXONE-ALC-V4 - 10-2010 Bedienungsanleitung

Omron

Omron MCH Bedienungsanleitung

Omron

Omron CX-INTEGRATOR - V2.3 REV 02-2009 Bedienungsanleitung

Omron

Omron FLEXXPECT-LABELLING Bedienungsanleitung

Omron

Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Bedienungsanleitung

Omron

Omron WS02-LCTC1-EV5 - V5.2 REV 12-2008 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung