Omron CX-PROCESS TOOL V5.2 - 12-2009 Bedienungsanleitung

Cat. No. W372-E1-13

CX-Process Tool Ver. 5.2

SYSMAC CS/CJ Series

WS02-LCTC1-EV5

OPERATION MANUAL

WS02-LCTC1-EV5

CX-Process Tool Ver. 5.2

Operation Manual

Revised December 2009

Notice:

OMRON products are manufactured for use according to proper procedures by a qualified operator

and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual. Always heed

the information provided with them. Failure to heed precautions can result in injury to people or dam-

age to property.

DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. Additionally, there may be severe property damage.

WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury. Additionally, there may be severe property damage.

Caution Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury, or property damage.

OMRON Product References

All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers

to an OMRON product, regardless of whether or not it appears in the proper name of the product.

The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means

“word” and is abbreviated “Wd” in documentation in this sense.

The abbreviation “PLC” means Programmable Controller. “PC” is used, however, in some Program-

ming Device displays to mean Programmable Controller.

Visual Aids

The following headings appear in the left column of the manual to help you locate different types of

information.

Note Indicates information of particular interest for efficient and convenient operation

of the product.

1, 2, 3... 1. Indicates lists of one sort or another, such as procedures, checklists, etc.

Copyrights and Trademarks

Windows is a registered trademark of the Microsoft Corporation.

Other system and product names that appear in this manual are the trademarks or registered trade-

marks of the respective company.

OMRON, 2000

form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permis-

sion of OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is

constantly striving to improve its high-quality products, the information contained in this manual is subject to change

without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no

responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the informa-

tion contained in this publication.

About Loop Controllers

Loop Control Types, Functional Elements, and Versions

Loop Controller Types

There are two types of CS/CJ-series Loop Controller: Separate Loop Control-

lers and Loop Controllers Pre-installed in CPU Units

Loop

Controller

type

Type name Product name Model PLC series and Unit type

Separate Separate

Loop

Loop Control Unit CS1W-LC001 CS-series CPU Bus Unit Loop

Controller

oop

Controller Loop Control

Board

CS1W-LCB01/05 CS-series Inner Board Loop Controller

Loop Control

Board with

Gradient

Temperature

Controller

CS1W-LCB05-GTC CS-series Inner Board Loop Controller

Pre-installed in

CPU Unit

CPU Unit with

Pre-installed

Loop

Ctll

Process-control

CPU Unit

CS1D-CPUPA one-Unit Loop Controller consisting

of an Inner Board pre-installed in a

CS-series CS1D-H CPU Unit

Controller Loop-control CPU

Unit

CJ1G-CPUPAn Inner Board Loop Controller

integrated into a CS-series CJ1-H CPU

Unit

Loop-control CPU

Unit with Gradient

Temperature

Controller

CJ1G-CPUP-GTC An Inner Board Loop Controller

integrated into a CJ-series CJ1-H CPU

Unit

Loop Controller Functional Elements

•Separate Loop Controllers consist of only the Loop Controller functional ele-

ment (i.e., the Loop Controller element).

•CPU Units with Pre-installed Loop Controller consists of a CPU Unit functional

element (i.e., the CPU Unit element) and the Loop Controller functional ele-

ment (i.e., the Loop Controller element).

Versions

The functional elements (i.e., the CPU Unit element and Loop Controller ele-

ment) have versions.

Model Numbers and Functional Elements

The following table lists the Loop Controller product model numbers, the func-

tional element names for the CPU Unit elements and Loop Controller elements,

and the versions of the functional elements.

vii

Product Product model

Unit version

f h

Configuration

name number of the

product

CPU unit element Loop Controller element

pro

model

(See note.)

CPU Unit

model with

same

functionality

Functional

element unit

version

Functional

element

name

Functional

element

Loop Control

Unit

CS1W-LC001 Pre-Ver. 2.0 --- LC001 Ver. 2.5

Loop Control

CS1W-LCB01 Ver. 2.0 or

--- LCB01 Ver. 2.0 or later

Board CS1W-LCB05 later LCB05 Ver. 2.0 or later

Loop Control

Board with

Gradient

Temperature

Controller

CS1W-LCB05-

GTC

Ver. 3.0 or

later

--- LCB05-GTC Ver. 3.0 or later

Process-

control CPU

CS1D-CPU65P --- CS1D-CPU65H Ver. 1.0 or later LCB05D Ver. 1.0

con

l CPU

Unit CS1D-CPU67P CS1D-CPU67H Ver. 1.0 or later LCB05D Ver. 1.0

Loop-control

CPU U i

CJ1G-CPU42P --- CJ1G-CPU42H Ver. 3.0 or later LCB01 Ver. 2.0 or later

CPU Unit CJ1G-CPU43P CJ1G-CPU43H Ver. 3.0 or later LCB03 Ver. 2.0 or later

CJ1G-CPU44P CJ1G-CPU44H Ver. 3.0 or later LCB03 Ver. 2.0 or later

CJ1G-CPU45P CJ1G-CPU45H Ver. 3.0 or later LCB03 Ver. 2.0 or later

Loop-control

CPU Unit with

Gradient

Temperature

Controller

CJ1G-CPU45P-

GTC

Ver. 3.0 or

later

CJ1G-CPU45H Ver. 3.0 or later LCB05-GTC Ver. 3.0 or later

Note Only Separate Loop Controllers have a unit version for the product model. CPU

Units with Pre-installed Loop Controllers do not have a unit version for the prod-

uct model.

Notation in this Manual

This manual uses the following notation.

•“Loop Controller” is used as a generic term to refer to the Loop Controllers in

general.

•“LCB” is used to refer to specific Loop Controller functional elements. For

example, the Loop Controller function element in a CS1W-LCB05 Loop Con-

trol Board is the LCB05, so “LCB05” is used to refer to the Loop Controller func-

tional element. The Loop Controller function element in a CJ1G-CPU44P

Loop-control CPU Unit is the LCB03, so “LCB03” is used to refer to the Loop

Controller functional element.

•Model numbers are used to refer to specific Loop Controller models.

In the CX-Process Tool Operation Manual for version 3.2 or earlier, functional

element names (LCB) are given as “Loop Control Board.” In the CX-Process

Tool Operation Manual for version 4.0 or higher, simply “LCB” is used.

viii

Unit Version Notation on Products

Loop Control Boards

A “unit version” has been introduced to manage CPU Units, Special I/O Units,

and Inner Boards in the CS/CJ Series according to differences in functionality

accompanying upgrades. This system applies to Units manufactured since Oc-

tober 1, 2003. The unit version code is provided on the nameplate of the product

for which unit versions are being managed, as shown below for the Loop Control

Board.

Product nameplate

Unit version

Example for unit version 1.5

Loop Control Board

The CX-Process Tool can be used to confirm the unit versions of Loop Control

Boards in the Monitor Run Status Window. After connecting the CX-Process

Tool online, select Operation – Monitor Run Status from the Execute Menu.

Confirm the unit version in ITEM099 (MPU/FROM version display) under from

the System Common Block (Block Model 000) in the Monitor Run Status Win-

dow.

ITEM Data name Data

099 MPU/FROM version indication V1.50

Functional Element Name and Version Code for Process-control CPU Units and

Loop-control CPU Units

The functional element name and functional element version code for Process-

control CPU Units and Loop-control CPU Units are provided on the nameplate

as shown in the following diagrams.

Version V1.50 and onwards must be indicated.

Process-control CPU Units

Note CPU Unit elements for which no version code is provided are pre-Ver. 2.0 CPU

Units.

Process-control CPU Unit

Product nameplate

Functional element name for

CPU Unit element

Nameplate on

left side of Unit

Functional element name for

Loop Controller element

Functional element version code for

Loop Controller element

Functional element

version code for the

CPU Unit element

Functional element

version code for

Loop Controller ele-

ment

Loop-control CPU Units

Loop-control CPU Unit Unit model number

Product nameplate

Lot No.

Functional element

version code for

CPU unit element

Product model and functional

element name

Recommended location for

attaching version label

Functional element

version code for

Loop Controller

element

Confirming CPU Unit Element Versions with Support Software

CX-Programmer version 4.0 can be used to confirm the unit version using either

of the following two methods.

•Using the PLC Information

•Using the Unit Manufacturing Information (This method can also be used for

Special I/O Units and CPU Bus Units.)

Note CX-Programmer version 3.3 or lower cannot be used to confirm unit versions.

PLC Information

1, 2, 3... 1. If you know the device type and CPU type, select them in the Change PLC

dialog box, go online, and select PLC – Edit – Information from the menus.

If you do not know the device type and CPU type, but are connected directly

to the CPU Unit on a serial line, select PLC – Auto Online to go online, and

then select PLC – Edit – Information from the menus.

2. In either case, the following PLC Information Dialog Box will be displayed.

Functional element name

for CPU Unit element

Functional element version

code for CPU Unit element

Use the above display to confirm the unit version of the CPU Unit that is con-

nected online.

Unit Manufacturing Information

1, 2, 3... 1. In the I/O Table Window, right-click and select Unit Manufacturing In-

formation – CPU Unit.

2. The following Unit Manufacturing Information Dialog Box will be displayed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron Software Handbücher

Omron

Omron CX-ONE - BROCHURE 1 Bedienungsanleitung

Omron

Omron FB LIBRARY - Benutzerhandbuch

Omron

Omron NT-series Bedienungsanleitung

Omron

Omron EST2-2C-MV4 Bedienungsanleitung

Omron

Omron CX-SUPERVISOR 3.1 - NET INTERFACE Bedienungsanleitung

Omron

Omron WS02-LCTC1-E - V2.60 REV 12-2003 Bedienungsanleitung

Omron

Omron NS-CXDC1-V3 Bedienungsanleitung

Omron

Omron NT - SUPPORT TOOL FOR WINDOWS V4 Bedienungsanleitung

Omron

Omron XTRAWARE Bedienungsanleitung

Omron

Omron NT - SUPPORT TOOL FOR WINDOWS 95-98 V3.2 Bedienungsanleitung

Omron

Omron CX-ONE - INTRODUCTION GUIDE 1 Referenzhandbuch

Omron

Omron CX-ONE V4 Bedienungsanleitung

Omron

Omron CXONE-ALC-V4 - 10-2010 Bedienungsanleitung

Omron

Omron CX-SUPERVISOR - SCRIPT REFERENCE REV2.0 Bedienungsanleitung

Omron

Omron CX-ONE Bedienungsanleitung

Omron

Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Bedienungsanleitung

Omron

Omron SYSMAC WS02-NSFC1-E Benutzerhandbuch

Omron

Omron CX-INTEGRATOR - V2.3 REV 02-2009 Bedienungsanleitung

Omron

Omron MCH Bedienungsanleitung

Omron

Omron CX-Supervisor Bedienungsanleitung

Omron

Omron CX-PROCESS MONITOR PLUS V2 - 01-2007 Bedienungsanleitung

Omron

Omron CX-PROGRAMMER 5 Bedienungsanleitung

Omron

Omron CX-PROCESS TOOL V5.2 - REV 10-2010 Bedienungsanleitung

Omron

Omron CX-PROGRAMMER V9 Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung