Omron A22E - Bedienungsanleitung

G-303A22E

A22E

Emergency Stop Switch

A22E

Install in 22-dia. or 25-dia.

Panel Cutout

• Direct opening mechanism with minimum

contact separation of 3 mm in accordance with

EN60947-5-1, . (only for NC contacts)

• Safety lock mechanism prevents misuse.

(No tampering – in accordance with EN 418)

• Easy mounting and removal of Switch Blocks

using an incorporated lever.

• Finger protection mechanism on Switch Unit

provided as a standard feature.

• Install using either round, forked crimp terminals,

or ferrules.

For additional installation of emergency-stop switches.

A22Z-3466-1

A22E-#-#

Emergency-stop switches can be

installed easily far from machines.

A22Z-B101Y

Control Box

G-304 Safety Sensors / Components

Model Number Structure

Model Number Legend

Completely Assembled

Shipped as a set which includes the Pushbutton, Lamp (lighted models only), and Switch.

Subassembled

The Pushbutton, Lamp, or Switch can be ordered separately. Use them in combination for models that are not available as assembled Units. These

can also be used as inventory for maintenance parts.

1 2 3 4

6D 6 VDC

6A 6 VAC

12A 12 VAC/VDC

24A 24 VAC/VDC

T1 110 VAC*1

T2 220 VAC*2

A22E#-#-#-#

1 Lighted/Non-lighted

Code Description

None Non-lighted

Lighted (see note)

2 Head Size

Code Description

40 dia. Push-pull

60 dia.

30 dia. Push-lock, turn-reset

40 dia.

60 dia.

30 dia. Push-lock key reset

40 dia.

3 Light Source

Code Operating Voltage

None Non-lighted

LED

With Voltage Reduction Unit

None Non-lighted

LED

Without Voltage Reduction Unit

4 Contacts

Code Description

SPST-NC

SPST-NO + SPST-NC

DPST-NC

*1) Operational voltage: 95 to 110 VAC

*2) Operational voltage: 190 to 230 VAC

Note: Lighted Emergency Stop

Switches are available

only for the 40-dia. push-

lock turn-reset models.

Note: The LED lamp (24 VAC/VDC) can be

lit by directly applying 110 VAC/VDC

(220 VAC/VDC) to the lamp terminal.

LED incorporates the 24-VAC/VDC

models.

Unit Combinations

Non-lighted Pushbutton

Pushbutton

Lamp

Switch (without Voltage Reduction Unit)

Switch (with Voltage Reduction Unit)

Switch

∑LED

∑Incandescent

Unit Combinations

∑LED

Lighted

(without Voltage

Reduction Unit)

Lighted

(with Voltage

Reduction Unit)

A22E

G-305A22E

1. Pushbutton

Lighted/Non-lighted

2. Lamp

3. Switch

Lighted/Non-lighted

1 2

A22E#-#

1 Lighted/Non-lighted

Code Description

None Non-lighted

Lighted (see note)

2 Head Size

Code Description

40 dia. Push-pull

60 dia.

30 dia. Push-lock, turn-reset

40 dia.

60 dia.

30 dia. Push-lock key reset

40 dia.

Note: Lighted Emergency Stop

Switches are available

only for the 40-dia. push-

lock turn-reset models.

1 2

6D 6 VDC (6 VDC)

6A 6 VAC (6 VAC)

12A 12 VAC/VDC (12 VAC/VDC)

24A 24 VAC/VDC (24 VAC/VDC)

A22-##

2 Illumination Color

Code Description

Red

1 Operating Voltage (Rated Voltage)

LED

Incandescent

Code

1 2 3

T1 110 VAC*1

T2 220 VAC*2

A22#-#M-#

1 Lighted/Non-lighted

Code Description

None Non-lighted

Lighted

2 Contacts

Code Description

SPST-NC

SPST-NO + SPST-NC

DPST-NC

3 Voltage Reduction Unit (Lighted Models Only)

Code Description

None Without Voltage Reduction Unit

*1) Operational voltage: 95 to 110 VAC

*2) Operational voltage: 190 to 230 VAC

G-306 Safety Sensors / Components

Ordering Information

List of Models

Completely Assembled (Ask your local OMRON representative)

Non-lighted Models

Lighted Models

Appearance Output Push-lock

turn-reset system Color of cap

SPST-NC A22E-MP-01

Red

SPST-NO/SPST-NC A22E-MP-11

DPST-NC A22E-MP-02

SPST-NC A22E-LP-01

SPST-NO/SPST-NC A22E-LP-11

DPST-NC A22E-LP-02

SPST-NC A22E-S-01

SPST-NO/SPST-NC A22E-S-11

DPST-NC A22E-S-02

SPST-NC A22E-M-01

SPST-NO/SPST-NC A22E-M-11

DPST-NC A22E-M-02

SPST-NC A22E-L-01

SPST-NO/SPST-NC A22E-L-11

DPST-NC A22E-L-02

SPST-NC A22E-SK-01

SPST-NO/SPST-NC A22E-SK-11

DPST-NC A22E-SK-02

SPST-NC A22E-MK-01

SPST-NO/SPST-NC A22E-MK-11

DPST-NC A22E-MK-02

Appearance Output Lighting Rated voltage Push-lock turn-re-

set system Color of cap

SPST-NC

LED

6 VDC A22EL-M-6D-01

Red

6 VAC A22EL-M-6A-01

12 VAC/VDC A22EL-M-12A-01

24 VAC/VDC A22EL-M-24A-01

SPST-NO/SPST-NC

6 VDC A22EL-M-6D-11

6 VAC A22EL-M-6A-11

12 VAC/VDC A22EL-M-12A-11

24 VAC/VDC A22EL-M-24A-11

DPST-NC

6 VDC A22EL-M-6D-02

6 VAC A22EL-M-6A-02

12 VAC/VDC A22EL-M-12A-02

24 VAC/VDC A22EL-M-24A-02

SPST-NC 110 VAC A22EL-M-T1-01

220 VAC A22EL-M-T2-01

SPST-NO/SPST-NC 110 VAC A22EL-M-T1-11

220 VAC A22EL-M-T2-11

DPST-NC 110 VAC A22EL-M-T1-02

220 VAC A22EL-M-T2-02

A22E-MP

40-dia. head

Push-pull

A22E-LP

60-dia. head

Push-pull

A22E-S

30-dia. head

Push-lock

Turn-reset

A22E-M

40-dia. head

Push-lock

Turn-reset

A22E-L

60-dia. head

Push-lock

Turn-reset

A22E-SK

30-dia. head

Push-lock

Key-reset

A22E-MK

40-dia. head

Push-lock

Key-reset

40-dia. head

Push-lock

Turn-reset

40-dia. head

Push-lock

Turn-reset with Voltage

Reduction Unit

A22E

G-307A22E

Subassembled

Pushbuttons

Non-lighted

Lighted

Lamp

LED

Note: For voltage-reduction lighting, use the A22-24AR.

Incandescent

Sealing capability and size IP65 oil-resistant models

Small (30 dia.) Medium (40 dia.) Large (60 dia.)

Push-pull ---

Push-lock, Turn-reset

Push-lock, key-reset

---

Sealing capability and size IP65

Medium (40 dia.)

Push-lock, Turn-reset

6 VDC 6 VAC 12 VAC/VDC 24 VAC/VDC Super-bright

24 VAC/VDC

Red A22-6DR A22-6AR A22-12AR A22-24AR A22-24ASR

Rated voltage 6 VAC 14 VAC 28 VAC 130 VAC

A22-5 A22-12 A22-24 A22-H1

A22E-MP A22E-LP

A22E-S A22E-M A22E-L

A22E-SK A22E-MK

A22EL-M

Rated voltage

LED light

G-308 Safety Sensors / Components

Switch (Standard Load)

Without Voltage Reduction Unit

With Voltage Reduction Unit

Note: 1. The above illustrations are for the DPST-NO contact.

2. When using with a Voltage Reduction Unit, use the A22-24AR.

Classification

Appearance

Switch Action Momentary Momentary

Contacts

For standard loads

SPST-NO A22-10M A22L-10M

SPST-NC A22-01M A22L-01M

SPST-NO + SPST-

NC A22-11M A22L-11M

DPST-NO A22-20M A22L-20M

DPST-NC A22-02M A22L-02M

Classification

Appearance

Switch Action Momentary Momentary

Contacts

For standard loads

SPST-NO A22L-10M-T1 A22L-10M-T2

SPST-NC A22L-01M-T1 A22L-01M-T2

SPST-NO + SPST-

NC A22L-11M-T1 A22L-11M-T2

DPST-NO A22L-20M-T1 A22L-20M-T2

DPST-NC A22L-02M-T1 A22L-02M-T2

Non-lighted Lighted

Lighted (110 VAC) Lighted (220 VAC)

A22E

G-309A22E

Accessories (Order Separately)

Item Appearance Classification Model Remarks

Switch Blocks

SPST-NO A22-10 Provided as standard. Order Switch

Blocks only when adding or replacing

them.

SPST-NC A22-01

Lamp Sockets

Direct lighting A22-TN

Used when changing the lighting

method.

Voltage-

reduction

lighting

110 VAC A22-T1

220 VAC A22-T2

Mounting Latches

For momentary-action

models A22-3200 Provided as standard. Order Mounting

Latches only when mounting Switch

Blocks or Lamp Sockets that are pur-

chased individually.

For alternate-action models A22-3210

Lock Ring Rounded shape A22Z-3360

The body is equipped with a Lock Fit-

ting. This Lock Fitting is used when a

more secure lock feature is required.

Hole Plug Round A22Z-3530

Can be plugged into pre-cut panel

holes for future expansion.The color is

black.

Control Boxes

(Enclosures)

One hole A22Z-B101

Material: Polycarbonate resin

One hole, yellow box

(for emergency stop) A22Z-B101Y

Two holes A22Z-B102

Three holes A22Z-B103

Connectors

Applicable ca-

ble diameter

(mm)

7 to 9 dia. A22Z-3500-1 Plastic connector used to extend

a cable from the Switch Box.

9 to 11 dia. A22Z-3500-2

25-dia. Ring ––– A22Z-R25

Can be fit into a 25-dia. hole in the

panel.

Since this is not attached to the main

body, order separately.

Legend Plates for Emer-

gency Stop

60-dia. black letters on yel-

low back-ground A22Z-3466-1 “EMERGENCY STOP” is indicated on

the plate.

90-dia. black letters on yel-

low back-ground A22Z-3476-1

Lamp Extractor ––– A22Z-3901 Rubber tool used to replace Lamps

easily

Tightening Tool ––– A22Z-3905 Tool used to tighten nuts from the back

of the panel

Lock Plate

--- A22Z-3380 Use to fix the lever on the Switch.

G-310 Safety Sensors / Components

Specifications

Approved Standards

Note: UL-approved for CSA C22.2 No. 14 and bears the cRmark.

Approved Standard Ratings

•UL, cUL (File No. E41515)

6 A at 220 V, 10 A at 110 VAC

•EN60947-5-1 (Low Voltage Directive)

Rated current: 10 A; Rated voltage: 220 VAC

Ratings

Contacts (Standard Load)

Note: 1. Rated current values are determined according to the test-

ing conditions. The above ratings were obtained by con-

ducting tests under the following conditions.

(1) Ambient temperature: 20×±2°C

(2) Ambient humidity: 65±5%

(3) Operating frequency: 20 operations/minute

2. Minimum applicable load: 10 mA at 5 VDC

Contacts (Microload)

LED Indicators without Voltage Reduction Unit

Super-bright LED Indicator

Incandescent Lamp

Voltage-reduction Lighting

Recognized

organization Standards File No.

UL (See note.) UL508 E41515

AZCO EN60947-5-1 C9805502

Rated

carry

current

Rated

voltage

Rated current (A)

AC15

(induc-

tive load)

AC12

(resistive

load)

DC13

(induc-

tive load)

DC12

(resis-

tive load)

24 VAC 10 10

--- ---

110 VAC 5 10

220 VAC 3 6

380 VAC 2 3

440 VAC 1 2

24 VDC

--- ---

1.5 10

110 VDC 0.5 2

220 VDC 0.2 0.6

380 VDC 0.1 0.2

Rated applicable load Minimum applicable load

50 mA at 5 VDC

(Resistive load) 1 mA at 5 VDC

Rated voltage Rated current Operating voltage

6 VDC 60 mA 6 VDC±5%

6 VAC 60 mA 6 VAC/VDC±5%

12 VAC/VDC 30 mA 12 VAC/VDC±5%

24 VAC/VDC 15 mA 24 VAC/VDC±5%

Rated voltage Rated current Operating voltage

24 VAC/VDC 15 mA 24 VAC/VDC ±5%

Rated voltage Rated current Operating voltage

6 VAC/VDC 200 mA 5 VAC/VDC

14 VAC/VDC 80 mA 12 VAC/VDC

28 VAC/VDC 40 mA 24 VAC/VDC

130 VAC/VDC 20 mA 100 VAC/VDC

Rated voltage Operational voltage Applicable lamp

(BA9S/13#gold)

110 VAC 95 to 115 VAC LED Lamp

(A22-24A#)

220 VAC 190 to 230 VAC

A22E

G-311A22E

Characteristics

Note: 1. With no icing or condensation.

2. Malfunction within 1 ms.

Operating Characteristics (for SPST-NO/SPST-NC)

Note: Rotation torque for Emergency Stop Pushbutton.

Item Emergency Stop Switches

Non-lighted model: A22E Lighted model: A22EL

Allowable operating

frequency

Mechanical 30 operations/minute max.

Electrical 30 operations/minute max.

Insulation resistance 100 MΩmin. (at 500 VDC)

Dielectric strength

2,500 VAC, 50/60 Hz for 1 min between terminals of same polarity

2,500 VAC, 50/60 Hz for 1 min between terminals of different polarity and also

between each terminal and ground

Vibration resistance Malfunction (See note 2.): 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance Mechanical 1,000 m/s2

Malfunction (See note 2.) 250 m/s2max.

Durability Mechanical Momentary operation: 300,000 operations min.

Electrical 300,000 operations min.

Ambient temperature

(See note 1.)

Operating:

-20°C to 70°C

Storage: -40°C to 70°C

Operating:

-20°C to 55°C

Storage:

-40°C to 70°C

Ambient humidity Operating: 35% to 85%

Degree of protection IP65

(oil-resistant) IP65

Electric shock protection class Class II

PTI (tracking characteristic) 175

Degree of contamination 3 (IEC947-5-1)

Item

Emergency Stop Switches

Push-lock turn-reset system

A22E, A22EL

Total travel force

(TTF) max. 44.1 N

Total travel

(TT) 10±1 mm

Releasing force (RF) min. 0.25 N·m max.

(See note.)

G-312 Safety Sensors / Components

Nomenclature

Safety Lock Mechanism to Prevent Misuse

This Switch can be intentionally used to stop equipment in an emergency. Even if an object or person touches the Pushbutton by mistake, the

contact will not be released unless the Pushbutton reaches the lock position.

This Switch uses a finger protection mechanism to prevent electrical shocks. Moreover, it is

provided with a mechanism to prevent terminal screws from coming off and also allows

connection to either round or forked crimp terminals.

Pushbutton

Lamp

∑Light source

Switch

∑Contact Ratings

∑Lighting Method

(The above figures are examples of the lighted model.)

Push-lock Turn-reset System

Available Color: Red

Non-lighted

Lighted

LED Lamp

Incandescent Lamp

10 A at 110 VAC (resistive load)

10 A at 24 VDC (resistive load)

Non-lighted

Lighted (without Voltage Reduction Unit)

Lighted (with Voltage Reduction Unit)

Lock position

Finger protection

Mechanism for preventing

terminal screws from coming

off (loosening the screws do

not cause them to come off)

Inhaltsverzeichnis

Andere Omron Schalten Handbücher

Omron

Omron D4A-N - Bedienungsanleitung

Omron

Omron D4NL - Bedienungsanleitung

Omron

Omron NL1-C Bedienungsanleitung

Omron

Omron D4BL - Bedienungsanleitung

Omron

Omron A4EG - Bedienungsanleitung

Omron

Omron A22S - Bedienungsanleitung

Omron

Omron A165S - Bedienungsanleitung

Omron

Omron D4GS-N - Bedienungsanleitung

Omron

Omron D4BS - Bedienungsanleitung

Omron

Omron D4D-R Series Bedienungsanleitung

Omron

Omron D4DL Bedienungsanleitung

Omron

Omron 61F-G Bedienungsanleitung

Omron

Omron C2UW-L Series Bedienungsanleitung

Omron

Omron WL-N Bedienungsanleitung

Omron

Omron 61F-GL2KM Bedienungsanleitung

Omron

Omron D4N-R - Bedienungsanleitung

Omron

Omron D40A-G9SX-NS - Bedienungsanleitung

Omron

Omron ER Series Bedienungsanleitung

Omron

Omron D2MQ Series Bedienungsanleitung

Omron

Omron A4E Bedienungsanleitung

Omron

Omron D4BL - Bedienungsanleitung

Omron

Omron A22NN Bedienungsanleitung

Omron

Omron HL-5030 Bedienungsanleitung

Omron

Omron E3G-L77 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung