Omron S8BA-24D24D120LF Bedienungsanleitung

Uninterruptible Power Supply (UPS)

S8BA-24D24D□□□LF

User's Manual

S8BA-24D24D120LF

S8BA-24D24D240LF S8BA-24D24D360LF/S8BA-24D24D480LF

Introduction

S8BA-24D24D□□□LF

Introduction

Thank you for purchasing OMRON's Uninterruptible Power Supply (UPS).

This manual contains information that is necessary to use the “Uninterruptible Power Supply (UPS)”.

Read this manual carefully and make sure that you understand the functionality and performance of

the product before using it in your system.

Keep this manual in a safe place where it will be available for reference during operation.

Intended audience

This manual is intended for:

Personnel with knowledge of electric systems (the level of knowledge an electrical engineer has or its

equivalent) and at the same time

▪ Personnel in charge of introducing FA systems

▪ Personnel in charge of designing FA systems

▪ Personnel in charge of installing and connecting FA systems

▪ Personnel in charge of managing FA systems and facilities

Applicable products

This manual covers the following products:

▪ Uninterruptible Power Supply (UPS) S8BA Series

・S8BA-24D24D120LF

・S8BA-24D24D240LF

・S8BA-24D24D360LF

・S8BA-24D24D480LF

Important notice

▪ No part of this manual may be copied, reproduced, or used in any form without our permission.

▪ Note that the content of this manual such as the specifications is subject to change for

improvement without prior notice.

▪ We have checked the content of this manual and believe it to be accurate. However, if you find any

errors or have any questions, contact our sales personnel

At that time, give the Man. No. (manual number) in the back of your manual.

Trademarks

▪ System names and product names indicated in this manual are registered trademarks or

trademarks of their respective owners.

Procedure from installation to operation

S8BA-24D24D□□□LF

Procedure from installation to operation

The procedure from installation to operation is shown below.

Start

Read “Safety Precautions”

Page 8

Remove the product from the

package and check the contents

2. Preparation

Perform installation and connection

3. Installation and connection

Are you using either of the

following functions?

- Automatic shutdown software

- I/O signal functions

6. To perform shutdown processing of the

devices when a power failure occurs

7. Using the I/O signal functions

Check the operation

4. Check and start operation

Charge the battery*

Operate

4. Check and start operation

*The battery in the UPS has not been charged

prior to shipment. Charge the battery when you

use the UPS for the first time.

Perform maintenance and inspection

5. Maintenance and Inspection

Replace the battery

5.2 Replacing the battery

The battery must

be replaced

Installation/connection

Preparation for operation

Operate

Perform maintenance

and inspection

Yes

Table of contents

S8BA-24D24D□□□LF

Table of contents

Introduction .................................................................................................. 1

Procedure from installation to operation ...................................................... 2

Table of contents ......................................................................................... 3

Read and understand this manual ............................................................... 5

Safety precautions ....................................................................................... 8

Regulations and standards ........................................................................ 17

1Overview of the product .................................................................... 19

1-1 Features of this product ................................................................................. 19

1-2 Specifications ................................................................................................. 20

2Preparation ....................................................................................... 22

2-1 Unpacking the product ................................................................................... 22

2-2 Checking the contents ................................................................................... 22

2-3 Name of each part ......................................................................................... 24

2-4 Diagram of the Input/output circuit block ....................................................... 29

3Installation and connection ................................................................ 30

3-1 Installation ...................................................................................................... 30

3-1-1 DIN rail installation ............................................................................................................ 34

3-1-2 Wall or floor mounting procedure ...................................................................................... 36

3-2 Connection ..................................................................................................... 40

3-2-1 Connecting a cable to the input terminal block and the output terminal block ................... 40

3-2-2 Connecting a device to the output terminal block .............................................................. 44

3-2-3 Connecting the input power supply to the input terminal block ......................................... 45

4Check and start operation ................................................................. 46

4-1 The name and function for the operation and display ...................................... 46

4-1-1 Name of each part ............................................................................................................. 46

4-1-2 Switch ............................................................................................................................... 46

4-1-3 Beep sound ....................................................................................................................... 47

4-2 Start and stop procedures and basic operation ............................................. 48

4-2-1 Start and stop procedures ................................................................................................. 48

4-3 Interpreting beeps and displays ..................................................................... 58

Table of contents

S8BA-24D24D□□□LF

4-4 UPS operation mode settings ........................................................................ 61

4-4-1 Settable items and explanations ........................................................................................ 61

4-4-2 Settings ............................................................................................................................. 64

5Maintenance and inspection .............................................................. 71

5-1 Checking the battery ...................................................................................... 71

5-1-1 Battery life expectancy ...................................................................................................... 71

5-1-2 Self-diagnosis test ............................................................................................................. 71

5-1-3 Estimated backup time ...................................................................................................... 72

5-2 Replacing the battery ..................................................................................... 74

5-2-1 Notification that the battery needs to be replaced ............................................................. 75

5-2-2 Procedure for replacing the battery ................................................................................... 76

5-3 Cleaning ......................................................................................................... 83

To perform shutdown processing of the devices when a power failure occurs

.......... 84

6-1 The outline on the UPS monitoring software ................................................. 84

6-1-1 What is the Simple Shutdown Software............................................................................. 84

6-1-2 How to connect.................................................................................................................. 84

7Using the I/O signal functions ............................................................ 87

7-1 I/O signal functions ........................................................................................ 87

7-1-1 Type of output signals ....................................................................................................... 87

7-1-2 Type of input signals .......................................................................................................... 87

7-1-3 I/O signal port (RJ45 connector)........................................................................................ 88

7-1-4 Contact signal ratings ........................................................................................................ 88

7-1-5 Contact signal circuit ......................................................................................................... 88

7-1-6 Precautions and notes for the use of the I/O signal functions ........................................... 89

7-1-7 Example of the use of the Contact Signal circuit ............................................................... 89

8Troubleshooting ................................................................................. 90

9References ........................................................................................ 91

9-1 Dimensions .................................................................................................... 91

9-2 Characteristic data ......................................................................................... 94

Read and understand this manual

S8BA-24D24D□□□LF

Read and understand this manual

Unless otherwise specially agreed upon regarding the “OMRON product”, the terms and conditions

described in this chapter shall apply regardless of your place of purchase.

Definition

The definitions of terms in this chapter are as follows:

・ “OMRON products”: FA system devices, general-purpose controllers, sensing devices, and

electromechanical components of “OMRON”

・ “Catalogs and other documents”: Catalogs such as the OMRON Best Controllers and the

Electromechanical Components General Catalog, specifications, instruction manuals, and other

catalogs and manuals related to “OMRON products”, including those provided in digital form

・ “Application conditions”: Conditions written in “catalogs and other documents” related to “OMRON

products” such as the usage conditions, ratings, performance, operating environment, operation

instructions, notes on usage, and prohibitions

・ “Customer's usage”: Use of the “OMRON product” intended by the customer, including embedding

or using the “OMRON product” in a component, electronic substrate, device, facility, or system

manufactured by the customer

・ “Suitability of use”: (a) Compliance; (b) operation; (c) non-infringement of third-party property

rights; (d) observance of laws and regulations; and (e) observance of standards regarding the

“OMRON product” in the “customer's usage”

Notes on information contained in this manual

For information contained in “catalog and other documents”, note the following:

・ Rated values and performance values are values obtained by stand-alone tests under specific

conditions. They do not guarantee values that are obtained under complex conditions.

・ Supplementary data is provided as reference, not guaranteeing that the unit always operates

correctly within the range of such data.

・ Usage examples are described as reference. “OMRON” shall not guarantee the “suitability” related

to them.

・ For improvements and other reasons, “OMRON” may discontinue the production of “OMRON

products” or change the specifications for “OMRON products”.

Read and understand this manual

S8BA-24D24D□□□LF

Notes when using the product

To adopt and use the product, note the following:

・ Use the unit according to the “application conditions” such as ratings and performance.

・ Confirm the “suitability” on your own to determine whether the “OMRON product” can be used for

your purpose. “OMRON” shall not be responsible for the “suitability of use” of any kind.

・ Be sure to confirm on your own in advance that the “OMRON product” is provided with electrical

power and installed properly for the intended use in your entire system.

・ To use the “OMRON product”, perform the following items: (i) use of the “OMRON product” with an

adequate margin relative to the ratings and performance and safety design such as redundant

design; (ii) safety design that minimizes hazards in the “customer's usage” even if the “OMRON

product” fails; (iii) formulation of safety measures in the entire system to alert the user; and (iv)

periodical maintenance of the “OMRON product” and periodical review of the “customer's usage”.

・ “Our product” is designed and manufactured as a general purpose product for use with a general

industrial product. It is therefore not intended for the purposes listed below. Should you use “our

product” for any of such purposes, we shall not guarantee “our product”. Even for any of such

purposes, however, the above is not applicable to cases in which our product is intended for the

use with a special product “we” intend and special agreement exists.

(a) When a high level of safety is required (such as nuclear control equipment, combustion

equipment, aerospace equipment, railway equipment, elevating equipment, entertainment

equipment, medical equipment, safety device, and other use that can cause danger to the

life or body of a person)

(b) When a high level of reliability is required (such as a gas, water, or electricity supply system,

24-hour non-stop operation system, payment system, and other use that handles rights and

properties)

equipment susceptible to chemical contamination, equipment susceptible to electromagnetic

interference, and equipment susceptible to vibration and impact)

(d) When the use conditions or environment is not as written in the “catalog or other documents”

・ Besides the purposes described from (a) to (d) above, “the product described in this catalog or

other documents” is not intended for vehicles (including two-wheel vehicles, and the same applies

hereafter). Do not install this product in a vehicle. For products to be installed in vehicles, consult

with our sales personnel.

Read and understand this manual

S8BA-24D24D□□□LF

Warranty conditions

The warranty conditions for the “OMRON product” are as follows:

・ Warranty period: For a period of 1 year from the date of purchase

(Unless otherwise described in “catalog or other documents”)

・ Warranty: Any of the following shall be performed on a faulty “OMRON product” at the discretion of

“OMRON”.

(a) In-warranty repair of a faulty “OMRON product” at an OMRON maintenance service center

(note that repair is not applicable to electromechanical components.)

(b) Supply of as many replacement products as the number of faulty “OMRON products” without

charge

・ Outside warranty: If the cause of the failure is any of the following, the failure shall be out of the

scope of warranty.

(a) Use other than the originally designed use of the “OMRON product”

(b) Use not compliant with the “application conditions”

(d) Modification and/or repair not carried out by “OMRON”

(e) Software program introduced not by “OMRON”

(f) Anything that could not be predicted considering the level of science and/or technology at

the time of shipment from “OMRON”

(g) Cause besides the above not attributable to “OMRON” or “OMRON products” (including

force majeure such as disasters)

Limitations of liability

The warranty described in this chapter covers all the warranty related to the “OMRON product”.

“OMRON” and distributors of “OMRON products” shall not be responsible for any damage that occurs

and is related to “OMRON products”.

Export controls

To export or provide to non-residents of Japan “OMRON products” or their technical documents,

observe the laws and regulations of Japan and other related countries regarding security and export

controls. Should you violate any laws or regulations, “OMRON products” or their technical documents

may not be provided.

Safety precautions

S8BA-24D24D□□□LF

Safety precautions

Important information for safe operation is described.

Be sure to read it before installation and start of use.

The safety symbols and their meaning used in this manual are as follows:

Warning If you fail to use the product properly, it may

result in injuries, mild or moderate, and may

lead to death.

Additionally, there may be

severe property damage.

Caution

If you fail to use the product properly, it may

result in injuries, mild or moderate, or

damage on property.

*Property damage means damage to houses/household effects, livestock, and pets.

●General inhibition

Notice prohibiting an unspecified general action.

●General instruction

Notice instructing an unspecified general action.

●Do-not-disassemble prohibition

Notice prohibiting disassembly because disassembling the

device may cause such an accident as an electric shock.

●Prohibition of use in locations subject to water such as a

bathroom and shower room.

Notice prohibiting installation of the device in locations

subject to water, because if a device not made water-proof is

used in such locations, injury may occur due to an electric

leak.

●Do-not-touch prohibition

Notice prohibiting touching the device because touching a

certain part of the device under certain conditions may result

in injury.

●Explosion alert

Notice alerting the user to the possibility of explosion under

certain conditions.

Note that events categorized as a caution required matter also may cause more serious results under

certain conditions. The information described here is very important and must be strictly observed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Omron UPS Handbücher

Omron

Omron POWLI Bedienungsanleitung

Omron

Omron BN50T Bedienungsanleitung

Omron

Omron POWLI BY50FW Bedienungsanleitung

Omron

Omron S8BA-24D24D Series SBF Bedienungsanleitung

Omron

Omron POWLI BN100XR Bedienungsanleitung

Omron

Omron S8BA LF Series Bedienungsanleitung

Omron

Omron BU5002R Bedienungsanleitung

Omron

Omron S8BA-B120L Bedienungsanleitung

Omron

Omron POWLI BU60RE Bedienungsanleitung

Omron

Omron BU150R Bedienungsanleitung

Omron

Omron Powli BU3002SW Bedienungsanleitung

Omron

Omron BU1002RW Bedienungsanleitung

Omron

Omron S8T-DCBU-01 Bedienungsanleitung

Omron

Omron Powli BY35S Bedienungsanleitung

Omron

Omron Powli BU75RW Bedienungsanleitung

Omron

Omron BU5002RWLG Bedienungsanleitung

Omron

Omron S8BA-24D24D480SBF Bedienungsanleitung

Omron

Omron POWLI BU50XS Bedienungsanleitung

Omron

Omron BA75T Bedienungsanleitung

Omron

Omron S8BA-24D24D960SBF Bedienungsanleitung

Omron

Omron BW40T Bedienungsanleitung

Omron

Omron BUM100R Bedienungsanleitung

Omron

Omron BN75R Bedienungsanleitung

Omron

Omron Powli BU1002SW Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung