Onaroo OTW091-US Bedienungsanleitung

Instructions

For Use

Model No. OTW091-US

Alarm Clock & Night-Light

Batteries Not Included

Requires four (4) 1.5V AA (LR6) batteries. Phillips head screwdriver (not included) required for

battery replacement. Adult supervision recommended.

Page 1

IMPORTANT SAFETY INSTRUCTIONS

For your protection, please read these safety instructions completely before operating this product. All

operating and use instructions should be followed. All warnings printed on the device and in the

operating instructions should be adhered to. Please keep this manual for future reference.

Batteries

Adult supervision is recommended when changing batteries. Non-rechargeable batteries are not to be

recharged. Rechargeable batteries are to be removed from the item before being charged.

Rechargeable batteries are only to be charged under adult supervision. Do not mix alkaline, standard

(carbon-zinc), or rechargeable (nickel-cadmium) batteries. Do not mix old and new batteries. Only

batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted

with the correct polarity. Exhausted batteries are to be removed from the item. The supply terminals

are not be short-circuited. Dispose of batteries safely. Batteries may explode or leak if disposed of in a

fire.

Moisture & Heat

Do not use this device near water. For example, do not use this device near a bathtub, wash bowl,

kitchen sink or laundry tub. Do not place water-filled vessels on this device. Do not place this device

near any heat sources such as radiators, stoves, amplifiers or other devices that produce heat. Do not

place an open flame on or near this device.

Object & Liquid Entry

Never insert objects of any kind into this product, through ventilation openings, as these objects may

touch dangerous voltage points or create a short circuit that could result in a fire or electric shock.

Never spill liquid of any kind on or into the device.

Care & Maintenance

Use a soft, damp cloth to wipe down the unit. Do not use liquid, aerosol or abrasive cleaners. Product

may wear over time, with use. Parents should periodically examine this product for potential hazards.

Any potentially hazardous parts should be repaired or replaced. Keep packaging and manual for future

reference.

Damage Requiring Service

Do not attempt to service the unit yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. All servicing should be referred to qualified personnel. This

product should be fixed by qualified service personnel under the following conditions:

1. If liquid has been spilled, or objects have fallen into the unit.

2. If the unit is exposed to rain or water.

3. If the product does not operate normally when following the operating instructions.

4. If the unit has been dropped or damaged in any way.

5. When the product exhibits a distinct change in performance.

Replacement Parts

In the event that replacement parts are required, ensure that the service technician uses parts specified

by the manufacturer or those deemed to be equivalent. Unauthorized substitutions may result in fire,

electric shock, or other hazards.

Page 2

SERVICE CONTACT INFORMATION

Please visit onaroo.com for the most up-to-date contact information and for details

regarding product servicing and/or warranty claims. You must receive a Return

Merchandise Authorization (RMA) number before shipping any item to Patch

Products. This product is distributed outside of the U.S., in select regions, by

authorized distribution partners. Patch Products does not handle foreign warranty

claims. For warranty service please contact your point of purchase for assistance.

Patch Products products purchased from U.S. retailers and shipped to international

locations are not covered under our domestic warranty policy.

We want your comments about our games, puzzles and toys. Contact us at:

Customer Service

1400 E. Inman Pkwy. Beloit, WI 53511

[email protected] 1-800-524-4263

For more fun, visit patchproducts.com.

Page 3

The OK to Wake!™ Alarm Clock & Night-Light is a fun clock for kids that actually

helps parents get more sleep!

The secret is the special night-light that can be set to turn green when it’s OK to get

out of bed to come see mom and dad.

You’ll be amazed at how quickly kids learn and how excited they are when the clock

glows green. Best of all, OK to Wake! does all the work while you catch up on your

sleep!

Left Toe

Button

Display

Control

Panel

Faceplates

Right Toe

Button

Fig. 1 OK to Wake!™

Introduction

Page 5

Setting the Time

When the batteries are first inserted, OK to Wake!

beeps and displays “12:00 p.m.” To set the correct

time, open the rear door to reveal the control

panel. See Fig. 3 below.

1) Hold down the SET button for two seconds.

“SET” flashes and “12 Hr” is displayed.

See Fig. 4.

2) Use the HOUR +/- buttons to toggle between

12- and 24-hour clock format. Tap SET to select

the format and continue.

3) The clock displays “SET 12:00 p.m.” (if in

12-hour format). See Fig. 5.

Use the HOUR +/- and MIN +/- buttons to

adjust the time (hold down these buttons to

scroll rapidly).

4) Press SET again when you are done to lock in

the new time. “SET” disappears from the

display.

[SET]

REVIEW

ON | OFF

WAKE

ALARM

HOUR MINAUTO-OFF NAP

Fig. 3 Control panel

SET

Fig. 4 Set clock format

SET

Fig. 5 Set time

Setup

Unpack OK to Wake! making sure to keep all packing materials away from children.

The product comes with two interchangeable faceplates. The pre-installed green bug

faceplate may be removed as follows:

1) If present, remove the adhesive tape at the bottom of the faceplate.

2) Slightly rotate the faceplate counter-clockwise and detach.

3) Remove the protective screen cover from the display.

4) Attach your favorite faceplate by aligning the tabs with the slots on the clock and

rotating clockwise to lock it in place.

Insert four AA (LR6) batteries into the battery compartment under the clock. You’ll

need a small Phillips head screwdriver. Place the batteries over the ribbon to make

removal easier next time. If the night light becomes dim or the clock doesn’t work

properly, it’s time to change the batteries. See Fig. 2.

Fig. 2 Battery compartment

Page 4

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Patch Products, LLC

1400 E. Inman Pkwy.

Beloit, WI 53511 USA

Power Source: DC 6V (4 x AA/LR6)

Model No. OTW091-US

U.S. Pat. D588,022.

Made in China.

Using the OK to Wake! Timer

The OK to Wake! night-light timer is an exciting

new sleep aid for parents! OK to Wake! glows

green in the morning at a time that you select.

Kids quickly learn to stay in bed until “Green

means GO!”

To set the OK to Wake! night-light timer:

1) Hold down the WAKE button for two seconds

until “SET OK TO WAKE!” flashes on the

display (OK to Wake! time is 6:00 a.m. by

default). See Fig. 6.

2) Use the HOUR +/- and MIN +/- buttons to set

the time you want the green light to turn on

(For example, 7:00 am).

3) Press WAKE again to lock in the new setting

and return to the time display. See Fig. 7.

Notice that “OK TO WAKE!” will remain on the

display as a reminder that the OK to Wake!

timer is active.

When the OK to Wake! time is reached, the clock

will glow green and the lit bulb icon will appear in

the display, letting your kids know that it is now OK

to get up. See Fig. 8.

Pressing the left toe button will toggle the green

light off and on. Pressing the right toe button will

stop the OK to Wake! timer and turn off the green

light.

Leave the OK to Wake! timer active if you want the

green light to turn on every day. Toggle this

function off and on by tapping the WAKE button.

Note: At the OK to Wake! time,

the clock glows green for 30

minutes (or the Auto-Off

duration - see page 12). During

this period, pressing the left toe

button toggles the green light.

After this period, the night-light

color returns to yellow (if lit) until

the OK to Wake! time on the

following day.

TO WAKE!

Fig. 7 OK to Wake! active

TO WAKE!

Fig. 8 OK to Wake! time

SET

ON OK

TO WAKE!

Fig. 6 Set OK to Wake!

Page 6 Page 7

Setting the Alarm

OK to Wake! can also be used as an alarm clock

with snooze function. Note that the alarm is set

and/or used completely independently from (or in

conjunction with) the green night-light timer. To set

the alarm:

1) Hold down the ALARM REVIEW button for two

seconds until “SET” and the bell icon flash in

the display. See Fig. 9.

2) Adjust the wake time (7:00 a.m. by default)

using the HOUR +/- and MIN +/- buttons (press

and hold these buttons to scroll rapidly).

3) Press ALARM REVIEW again to lock in your

setting. The current time is displayed and the

alarm is automatically activated (bell icon is

displayed). See Fig. 10.

The alarm will sound each day. Toggle the alarm

feature OFF at any time by tapping the ALARM

ON | OFF button. When the alarm is off, the bell

icon is not displayed. See Fig. 11.

Continued ...

Fig. 10 Current time

Fig. 11 Alarm off

SET

Fig. 9 Set alarm

Using the Nap Timer

OK to Wake! has a handy nap timer that makes it

easy to set an alarm and/or a green light alert for

naps during the day, without disrupting other

settings.

To start a nap, just tap the NAP button. The nap

timer will count down and chime after one hour.

After one minute the display looks like Fig. 16 (the

colon flashes).

The nap timer can be set to chime, turn on the

green light, or both. This setting may be toggled

by tapping the WAKE button during the nap or

when setting the nap duration (see below).

To customize the nap timer duration:

1) Hold down the NAP button for two seconds

until “SET NAP” flashes. See Fig. 17.

2) Adjust the nap duration (the length of the nap

in hours and minutes) using the HOUR +/- and

MIN +/- buttons.

3) Tap the WAKE button to select whether the

alarm chime, green light, or both should turn on

at the end of the nap.

4) Press NAP again when you are done. “SET”

disappears and the nap begins (the colon

flashes) automatically.

Toggle the nap function on or off at any time by

tapping NAP. OK to Wake! remembers the nap

duration that you last programmed.

NAP

Fig. 16 Nap timer running

NAP

SET

Fig. 17 Set nap timer

SNOOZE

Fig. 18 Nap ended,

snooze on

Note: At the end of the nap, the

alarm and/or green light will turn

on. Press the right toe button to

turn these off. Press the left toe

button to snooze the alarm

and/or light for 10 minutes

(SNOOZE will appear in the

display). You can press the right

toe button to cancel the snooze

at any time. Fig. 18.

Page 9Page 8

Setting the Alarm

(Continued)

Review the currently set alarm wake time by

tapping the ALARM REVIEW button. “REVIEW”

appears on the LCD with the alarm wake time or

“OFF”. See Figs. 12 & 13.

When Alarms are Sounding

When the alarm is sounding, press the right toe

button to turn it off.

Pressing the left toe button will snooze the alarm

for 10 minutes (”SNOOZE” will appear in the

display). Press the right toe button to cancel the

snooze at any time. See Fig. 14.

When the alarm is sounding, an animation will

make waking up more fun. See Fig. 15.

REVIEW

Fig. 13 Alarm disabled

SNOOZE

Fig. 14 Alarm snooze

Fig. 15 Fun animation

REVIEW

Fig. 12 Alarm set

for 7:00 am

Page 11

Other Onaroo Products from Patch Products

Please visit us on the web at onaroo.com

Night Owl Portable

Night-Light

OK to Wake!™ Owl

with Night-Light & Music

Teach Me Time!™ Talking

Alarm Clock & Night-Light

Danny the Penguin

Portable Night-Light

Page 10

Night-Light

The OK to Wake! clock also has a soft-glow, yellow

night light that can be toggled on and off at any

time by pressing the left toe button. The lit bulb

icon appears in the display when the night light is

on. See Fig. 19.

Note: If the OK to Wake! timer is on and the clock

is green, pressing the left toe button will toggle

the green light on and off, rather than the yellow

light. See note on page 8.

Auto-Off

To save energy, the yellow and green night-lights

will turn off automatically after a period of time (30

minutes by default).

This setting may be customized by tapping the

AUTO-OFF button (0:15, 0:30, 1:00, 1:30 or 2:00).

When the desired setting is displayed, stop

tapping the AUTO-OFF button. After a moment

the clock resumes ordinary time display, and the

new auto-off setting is locked in. See Fig. 20.

Brightness

When the clock is displaying the time, you can

adjust the display and night-light brightness by

pressing the MIN +/- buttons. There are three

distinct brightness settings. See Fig. 21.

Surprise

When the clock is displaying the time, press the

right toe button for a fun surprise! See Fig. 22.

AUTO-OFF

Fig. 20 Set auto-off time

Fig. 21 Adjust brightness

Fig. 22 Surprise!

Fig. 19 Night-light on

Note: Due to production changes and improvements, actual product may

vary slightly from images shown in manual and/or on packaging.

Manual v4.0 (US)

U.S. Patent No. D588,022.

onaroo.com

Page 12

Coverage

In the United States, Patch Products, LLC warrants this product against defects in original material and

workmanship for a period of one year under normal use and conditions. Warranty coverage outside of

the United States may vary. Please see information regarding non-U.S. warranty claims, below.

Non-Coverage

This warranty does not cover customer instruction, installation, or set up problems. This warranty does

not cover cosmetic damage or damage resulting from acts of God, accident, misuse, abuse,

negligence, commercial application (or rental), or modification. This warranty does not cover damage

due to improper operation or maintenance, connection to an improper voltage supply, or attempted

repair by anyone other than Patch Products, LLC or Patch Products, LLC authorized service facilities.

This warranty does not cover products sold "as is" or "with all faults". This warranty is valid only in the

United States and is invalid if the product serial number has been altered or removed.

Making a Warranty Claim - United States

Please check onaroo.com for the latest information pertaining to warranty claims. At the company’s

discretion, Patch Products, LLC will repair or replace the defective unit. Proof of purchase in the form

of a bill of sale or receipted invoice which is evidence that the unit is within the warranty period must

be presented to obtain warranty service.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF

THE CONSUMER. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF

MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE EXPRESSED WARRANTY AS

PROVIDED ABOVE, BEGINNING WITH THE ORIGINAL DATE OF PURCHASE. NO WARRANTIES,

WHETHER EXPRESSED OR IMPLIED, SHALL APPLY TO THE PRODUCT THEREAFTER. WE MAKE NO

WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR USE.

THE EXTENT OF OUR LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR

REPLACEMENT PROVIDED ABOVE AND IN NO EVENT WILL OUR LIABILITY EXCEED THE PURCHASE

PRICE PAID BY THE PURCHASER. UNDER NO CIRCUMSTANCES WILL WE BE LIABLE FOR ANY

LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF

OR IN CONNECTION WITH THE USE OF THIS PRODUCT.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, BUT YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED

WARRANTIES OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGE, SO

THESE RESTRICTIONS MAY NOT APPLY TO YOU.

Making a Warranty Claim - Outside of the United States

This product is distributed outside of the United States, in select regions, by authorized distribution

partners. Patch Products does not handle foreign warranty claims. For warranty service please contact

your point of purchase for assistance. Patch Products products purchased from U.S. retailers and

shipped to international locations are not covered under our domestic warranty policy.

LIMITED WARRANTY

Andere Handbücher für OTW091-US

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Onaroo Wecker Handbücher

Onaroo

Onaroo OTW091-US Bedienungsanleitung

Beliebte Wecker Handbücher anderer Marken

Steren

Steren CLK-210 Bedienungsanleitung

COP-USA

COP-USA ALCDVR32-SL Bedienungsanleitung

Philips

Philips HF3505/70 Technisches Handbuch

Casio

Casio PQ-70 Bedienungsanleitung

iHome

iHome IA63 Bedienungsanleitung

Coopers

Coopers 9765 Bedienungsanleitung

ANJANK

ANJANK AC-190 Leitfaden

TFA

TFA 98.1075 Bedienungsanleitung

Sharper Image

Sharper Image 204050 Bedienungsanleitung

Lumie

Lumie Zest Bedienungsanleitung

Dexford

Dexford RCT200 Bedienungsanleitung

Philips

Philips AJL303/37B Bedienungsanleitung

RST

RST Q754 Bedienungsanleitung

iHome

iHome iKT50 Bedienungsanleitung

Sony

Sony dash HID-B7 Bedienungsanleitung

SVINZ

SVINZ SCC009 Bedienungsanleitung

Clas Ohlson

Clas Ohlson 918863 Bedienungsanleitung

IKEA

IKEA FNURRA Bedienungsanleitung