One Forall OARN03S Bedienungsanleitung

3-Device

Universal

Remote Control

Control Remoto Universal

de 3 Dispositivos

OARN03S User’s Guide • Guía del Usuario

Contents

Step 1: Install your batteries...................... 2

Step 2: Program your remote.................... 2

Auto Code Search.................................... 3

Brand Code Search .................................. 4

Direct Code Entry .................................... 5

Manual Code Search ............................... 6

Tour of the Remote.................................... 8

Advanced Functions................................... 9

Reassigning the DVD•VCR Key to

Control a VCR ....................................... 9

Volume Punch-Through .......................... 9

Transport Key Punch-Through................ 9

Code Retrieval ....................................... 10

Channel Lock ......................................... 10

Troubleshooting....................................... 11

Limited Lifetime Warranty ...................... 24

Contenido

Paso 1: Instale las baterías ....................... 13

Paso 2: Programe el control remoto ....... 13

Búsqueda Automática de Códigos ....... 14

Búsqueda de Códigos por Marca.......... 15

Entrada Directa de Códigos.................. 16

Búsqueda Manual de Códigos.............. 17

Recorrido del control remoto.................. 19

Funciones Avanzadas ............................... 20

Cómo Reasignar la Tecla DVD•VCR

para Manejar una VCR....................... 20

Irrupción de Volumen ........................... 20

Irrupción de Teclas de Transporte ........ 20

Bloqueo de Canales............................... 21

Recuperación de Códigos ..................... 21

Resolución de Problema .......................... 22

Garantía Limitada

Durante la Vida Útil del Producto........ 24

Care and Maintenance

• Keep the remote dry. If it gets wet, wipe it dry immediately.

• Use and store the remote only in normal temperature environments.

• Handle the remote gently and carefully. Don’t drop it.

• Keep the remote away from dust and dirt.

• Wipe the remote with a damp cloth occasionally to keep it looking

new.

• Modifying or tampering with the remote’s internal components can

cause malfunction and invalidate its warranty.

The OARN03S Universal Remote Control by One For All is a

perfect way to simplify home entertainment. It lets you control

up to three of your home entertainment devices from a single,

easy-to-use remote.

To use this universal remote with your home entertainment

system, rst you need to program it to control your devices.

There are four ways you can program the universal remote to

operate your devices:

• The Auto Code Search goes automatically through all the

codes for the device you’re trying to control. It’s the easiest

method, but it can sometimes take longer than some of the

other programming methods.

• The Brand Code Search searches through the codes for

select brands of devices. It’s not as easy as the auto code

search, but it can be faster.

• The Direct Code Entry lets you enter a code from the

accompanying code list for your brand of device. It’s not as

easy as the other methods, but it’s potentially the fastest

method.

• The Manual Code Search lets you manually go through all

the codes for the device you’re trying to control.

Step 1: Install your batteries

Your universal remote requires two AAA alkaline batteries (not

included).

To install the batteries:

1. Press and push the battery compartment cover to remove

it.

2. Insert the batteries, matching the batteries to the (+) and

(–) marks inside the battery compartment.

3. Push the battery cover back into place.

Battery Precautions:

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc) or rechargeable

(nickel-cadmium) batteries.

• Always remove old, weak or worn-out batteries promptly

and recycle or dispose of them in accordance with Local

and National Regulations.

Step 2: Program your remote

English

Auto Code Search

The Auto Code Search goes automatically through all the codes

for the device you’re trying to control. When you nd the one

that operates your device, you can stop the search and store

that code.

TIPS: Each device key is associated with a type of device—the

TV is preset to search for TVs, SAT•CBL•DTC for satellite

receivers, cable boxes or digital TV converters, and DVD•VCR

for DVD players. To program the DVD•VCR key to control a PVR

or VCR, see the Reassigning the DVD•VCR Key to Control a VCR

section.

To exit without saving a new code at any point in the Auto

Code Search, press the EXIT key.

1. Manually turn on the device you want to control.

2. Press and hold the device key you want to program. The

POWER key illuminates.

While you’re holding down the device key, use your other

hand to press and hold the remote’s POWER key at the

same time. The POWER key turns off.

3. Wait until the POWER key comes on and stays on. Then

release both keys.

4. Point the remote directly at the front panel of the device

you want to control. Press PLAY on the remote and wait 5

seconds. The remote is testing a batch of 10 codes on your

device.

Did your device turn off?

YES: Go to step 5.

NO: Press PLAY again. The remote tests the next batch of

10 codes.

Keep pressing PLAY every 5 seconds until your device turns

off.

5. When your device turns off, press the REVERSE key on the

remote and wait at least 2 seconds. The remote tries the

last of the previous ten codes.

Did your device turn on?

YES: Press the STOP key. You’re done! You’ve programmed

this device key.

NO: Press REVERSE again. The remote tests the next code in

the batch.

Keep pressing REVERSE every 2 seconds until your device

turns back on. When it does, press STOP.

Note: If you accidentally press the REVERSE key after your

device turns on, press the FORWARD key. Then, wait two

seconds to see if your device turns off again.

NOTES

Throughout the programming of each key, be sure to keep the

remote pointed at the IR sensor of the device you are currently

programming the remote to control.

Test the remote with the device to make sure the device key is

programmed with the correct code for maximum functionality.

If some features don’t work, try a different code. See the

“Testing the Code for Maximum Functionality” section on the

next page for more information.

continues on next page...

During the Auto Code Search, the remote ignores keypresses

that aren’t part of the search.

The search times out after two minutes (the POWER key blinks

four times and turns off, and the last programmed code under

that device key is retained).

The POWER key blinks four times and turns off when the

remote has gone through all the codes. The remote exits the

Auto Code Search. If your device hasn’t turned off yet, try a

different search method.

Testing the Code for Maximum Functionality

1. Try a variety of the device’s functions with the remote. If

some device features don’t work, go to the next step to try

a different code.

2. Repeat the Auto Code Search Method from the beginning.

When your device turns off, do not stop searching. Instead,

with the unit now off, continue to press the PLAY key every

5 seconds until the unit turns back on.

3. Once the unit turns back on, press the REVERSE key on the

remote every 2 seconds until your device turns off again.

When your device turns off again, press the STOP key.

4. Test the key’s functionality again by attempting to control

a variety of the device’s functions. If the code that has

been stored controls the majority of the device’s functions,

programming is complete. If the code stored does not give

maximum functionality, try another code.

Brand Code Search

The Brand Code Search goes through only the codes for one of

the select brands listed in the accompanying code list. If your

brand of device is listed, this search can be very quick and easy.

TIPS: Each device key is associated with a type of device—the

TV is preset to search for TVs, SAT•CBL•DTC for satellite

receivers, cable boxes or digital TV converters, and DVD•VCR

for DVD players. To program the DVD•VCR key to control a PVR

or VCR, see the Reassigning the DVD•VCR Key to Control a VCR

section.

To exit without saving a new code at any point in the Brand

Code Search, press the EXIT key.

1. Manually turn on the device you want to control.

2. Find your device’s brand in the Brand Code list section of

the accompanying code list. Circle the number for your

brand and keep the list handy.

3. Press and hold the device key you want to program. The

POWER key illuminates.

While you’re holding down the device key, use your other

hand to press and hold the remote’s POWER key at the

same time. The POWER key turns off.

4. Wait until the POWER key comes on and stays on. Then

release both keys.

5. Look at the numbers you circled for your device’s brand

code number. Press those numbers on the remote keypad.

Note: For single-digit brand codes, press the 0 key ﬁrst (for

example, 0-5 for 5).

English

6. Point the remote directly at the front panel of the device

you want to control. Press POWER on the remote and wait

2 seconds. The remote is testing a single code for your

device’s brand.

Did your device turn off?

YES: Press the STOP key to store the code. You’re done!

You’ve programmed this device key.

NO: Press POWER again. The remote tests the next code for

your brand.

Keep pressing POWER every 2 seconds until your device

turns off. When it does, press STOP.

NOTES

Throughout the programming of each key, be sure to keep the

remote pointed at the IR sensor of the device you are currently

programming the remote to control.

Test the remote with the device to make sure the device key is

programmed with the correct code for maximum functionality.

If some features don’t work, try a different code. See the

“Testing the Code for Maximum Functionality” section below

for more information.

During the Brand Code Search, the remote ignores keypresses

that aren’t part of the search.

The search times out after two minutes (the POWER key blinks

four times and turns off, and the last programmed code under

that device key is retained).

The POWER key blinks four times and turns off when the

remote has gone through all the codes. The remote exits the

Brand Code Search. If your device hasn’t turned off yet, try a

different search method.

Testing the Code for Maximum Functionality

1. Try a variety of the device’s functions with the remote. If

some device features don’t work, go to the next step to try

a different code.

2. Repeat the Brand Code Search from the beginning. When

the device turns off for the rst time, don’t press the STOP

key, which would store the same code. Instead, with the

unit now off, continue to press the POWER key repeatedly

until the unit turns back on.

3. Once the unit turns back on, you have found another code

that operates the device. Press the STOP key.

4. Test the key’s functionality again by attempting to control

a variety of the device’s functions. If the code that has

been stored controls the majority of the device’s functions,

programming is complete. If the code stored does not give

maximum functionality, try another code.

Direct Code Entry

Direct Code Entry lets you enter a code from the accompanying

code list for your brand of device. It’s not as easy as the other

methods, but it’s potentially the fastest method.

TIP: Each device key is associated with a type of device—the TV

is preset to search for TVs, SAT•CBL•DTC for satellite receivers,

cable boxes or digital TV converters, and DVD•VCR for DVD

players. To program the DVD•VCR key to control a PVR or VCR,

see the Reassigning the DVD•VCR Key to Control a VCR section.

1. Manually turn on the device you want to control.

2. Find the Code List that came with the remote. Locate the

section for the type of device you’re trying to program, and

nd your brand in that section. Circle the codes for your

brand and keep them handy.

continues on next page...

3. Press and hold the device key you want to program (the

POWER key illuminates).

While you’re holding down the device key, use your other

hand enter the rst ve-digit code for your brand in the

code list (the POWER key turns off after the rst digit).

While you’re holding down the device key, use your other

hand to press and hold the remote’s POWER key at the

same time. The POWER key turns off.

4. When you’ve nished entering the ve-digit code, keep

holding down the device key and look at the POWER key.

Is the POWER key illuminated?

YES: You’re done! You’ve programmed this device key.

NO, it blinked four times and turned off: You have

either entered a code number that is not in the code lists or

missed a step in the code entry procedure. Try step 3 again.

NOTES

Test the remote with the device to make sure the device key is

programmed with the correct code for maximum functionality.

If some features don’t work, try a different code in the list.

Remember to enter the code for future reference in the box

provided in the Code Retrieval section of this manual.

If your brand isn’t listed in the code list, use one of the Code

Search methods to program the remote control. (Refer to the

Auto and Manual Code Search methods.)

If you release the device key any time during the Direct Code

Entry procedure, the POWER key blinks four times, and the

process is exited. The last programmed code under the device

key is retained.

Manual Code Search

The Manual Code Search lets you go one-by-one through all

the codes for the device you’re trying to control. When you nd

the one that operates your device, you can stop the search and

store that code.

TIPS: The Manual Code Search method may take a long time

because the remote searches through all of the codes in its

memory one-by-one. If your brand is listed in the Brand Codes

or the Code Lists, ﬁrst try the Brand Code Search or the Direct

Code Entry method.

Each device key is associated with a type of device—the TV is

preset to search for TVs, SAT•CBL•DTC for satellite receivers,

cable boxes or digital TV converters, and DVD•VCR for DVD

players. To program the DVD•VCR key to control a PVR or VCR,

see the Reassigning the DVD•VCR Key to Control a VCR section.

To exit without saving a new code at any point in the Manual

Code Search, press the EXIT key.

1. Manually turn on the device you want to control.

2. Press and hold the device key you want to program. The

POWER key illuminates

English

3. Wait until the remote’s POWER key comes on and stays on.

Then release both keys.

4. Point the remote directly at the front panel of the device

you want to control. Press POWER on the remote and wait

2 seconds. The remote is testing a single code for your

device.

Did your device turn off?

YES: Press the STOP key to store the code. You’re done!

You’ve programmed this device key.

NO: Press POWER again. The remote tests the next code for

your device.

Keep pressing POWER every 2 seconds until your device

turns off. When it does, press STOP.

TIP: Because there are so many codes, you may have to

press the POWER key many times—possibly hundreds of

times.

NOTES

Throughout the programming of each key, keep the remote

pointed at the IR sensor of the device you are programming the

remote to control.

Test the remote with the device to make sure the device key is

programmed with the correct code for maximum functionality.

If some features don’t work, try a different code. See the

“Testing the Code for Maximum Functionality” section below

for more information.

During the Manual Code Search, the remote ignores keypresses

that aren’t part of the search.

The search times out after two minutes (the POWER key blinks

four times and turns off, and the last programmed code under

that device key is retained).

The POWER key blinks four times and turns off when the

remote has gone through all the codes. The remote exits the

Brand Code Search. If your device hasn’t turned off yet, try a

different search method.

Testing the Code for Maximum Functionality

1. Try a variety of the device’s functions with the remote. If

some features of your devices don’t work, go to the next

step to try a different code.

2. Repeat the Manual Code Search and Entry Method from

the beginning. When the device turns off for the rst time,

don’t press the STOP key, which would store the same

code. Instead, with the unit now off, continue to press the

POWER key repeatedly until the unit turns back on.

3. Once the unit turns back on, you have found another code

that operates the device. Press the STOP key.

4. Test the key’s functionality again by trying a variety of

functions. If the code controls the majority of the device’s

functions, programming is complete. If the code stored

does not give maximum functionality, try another code.

Tour of the Remote

In most cases, the keys on this remote perform the same

functions as the keys on your original remotes once you’ve

programmed this remote to operate your components. Many

keys on this remote have other functions as well.

Illuminated POWER key

serves as an indicator light to

provide feedback.

Device keys (TV,

SAT•CBL•DTC, DVD•VCR)

put the remote in the right

mode to control your device.

GUIDE and MENU put the

remote in menu/guide mode;

they also access the same

features as the keys on your

original remotes.

EXIT exits remote

programming; it also

performs the same functions

as on your original remotes.

Arrow keys act as navigation

keys in device guides and

menu systems.

The INPUT•DIGITAL and

— (dash) key has three

functions: (1) it toggles

through all the video sources

connected to your TV; (2)

when the remote is in VCR

mode, this button toggles

between VCR and the TV

input; (3) when you’re

entering digital channel

numbers directly, this button

lets you separate the main

channel number from the

sub-channel number (such as

59.1).

IMPORTANT

Because this remote controls more than one device, you must

ﬁrst “tell” the remote which device you wish to operate. That

means, if you wish to operate your TV, you must ﬁrst press the

TV key to put the remote in the TV Mode. The remote stays

in that device mode until you press a different device key. For

example, if your remote is in TV Mode and you want to operate

the DVD player, you must press the DVD•VCR key to change

device modes.

English

Reassigning the DVD•VCR Key to

Control a VCR

The DVD•VCR key defaults to control a DVD player. If you want

the DVD•VCR key to control a VCR, you must reassign it.

1. Press and hold the DVD•VCR key. The POWER key

illuminates. Keep holding down the DVD•VCR key.

2. While holding down the DVD•VCR key, press and release

the number 2 key on the keypad. The POWER key turns off.

3. Release the DVD•VCR key. The POWER key blinks four times

and then turns off. The DVD•VCR key is now set to control

a VCR.

4. Follow the directions in the auto, brand, direct entry, or

manual code search to program the DVD•VCR key for your

VCR.

Advanced Functions

Volume Punch-Through

Volume punch-through allows the VOL and MUTE keys, when

pressed in SAT•CBL•DTC or DVD•VCR modes, to “punch

through” to TV. Volume punch-through occurs automatically

and allows you to control the volume without exiting the

current mode.

Note: Volume punch-through does not occur in cases where

the component code has its own volume/mute controls, such as

some satellite receivers.

Transport Key Punch-Through

Transport key punch-through allows the transport keys

(REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE, SKIP BACK,

SLOW, and SKIP FWD), when pressed in TV or SAT•CBL•DTC

modes, to “punch through” to DVD•VCR mode. Transport key

punch-through occurs automatically and allows you to use the

transport keys without exiting the current mode. For example,

if the transport keys were last used in DVD mode and accessed

again after pressing the TV key, they will punch through to the

DVD.

Note: Transport key punch-through does not occur in cases

where the device code has its own transport key data, such as a

satellite receiver with a built-in DVR.

Channel Lock

Channel lock automatically sends channel commands, like the

CH, LAST, and 0–9 number keys, to your satellite receiver, cable

box, or digital TV converter when you’re in TV mode. This can

save you keypresses if you use a device other than your TV to

change channels.

To turn channel lock on:

1. Press and hold the device key for the device you use to

change channels. While you’re holding down this device

key, use your other hand to press and hold the remote’s CH

up key at the same time.

2. Wait until the remote’s POWER key comes on and stays on.

Then release both keys.

3. Press ENTER to lock channel commands to this device.

To turn channel lock off:

1. Press and hold the TV key. While you’re holding down the

TV key, use your other hand to press and hold the remote’s

CH down key at the same time.

2. Wait until the remote’s POWER key comes on and stays on.

Then release both keys.

3. Press ENTER to start changing channels with your TV.

Code Retrieval

Once you’ve programmed the remote to control your devices,

you may want to record the codes for future reference. If

you used the Direct Code Entry method, this is easy. Just nd

the codes you entered and make a note of them in the boxes

below. If you used one of the Code Search methods to program

your remote or if you used the Direct Entry method but don’t

remember the code, you will need to retrieve each device’s ve-

digit code. Retrieving the actual code and writing it down will

save you time if you ever need to program the remote again. If

the codes are recorded, you can use the Direct Entry method to

reprogram your remote to control your devices, which is quick

and easy.

1. Press and hold the device key (TV, SAT•CBL•DTC, DVD•VCR)

whose code you wish to retrieve. The POWER key

illuminates. Keep pressing the device key.

2. While holding the device key down, press and hold the

INFO key. The POWER key turns off. After holding down

both keys for three seconds, the POWER key turns back on.

3. Release both keys. The POWER key remains on.

4. Starting with the number 1 key, press and release each

number key on the keypad in the following order: 1-9, then

0. The number that causes the POWER key to blink is the

rst number of the code. As you nd each number of the

code, write it down for future reference.

Note: All TV codes begin with the number 1; all VCR

and DVR codes begin with the number 2; all DVDs, the

number 3; and all satellite receivers, cable boxes and DTV

converters, the number 5.

5. Repeat step 4 until you have retrieved all ve numbers in

the code. After the fth number is retrieved, the POWER

key blinks briey, then turns off.

TIP: To exit the Code Retrieval Mode at any time, press the

EXIT key.

Andere Handbücher für OARN03S

Inhaltsverzeichnis

Sprachen:

Andere One Forall Fernbedienung Handbücher

One Forall

One Forall URC-6820 Bedienungsanleitung

One Forall

One Forall URC-3300 Bedienungsanleitung

One Forall

One Forall URC-7140 Technisches Datenblatt

One Forall

One Forall URC 1919 Bedienungsanleitung

One Forall

One Forall URC 7115 Bedienungsanleitung

One Forall

One Forall URC-7781 Bedienungsanleitung

One Forall

One Forall URC-6420 Administratorhandbuch

One Forall

One Forall ONE FOR ALL URC3110 Bedienungsanleitung

One Forall

One Forall Smart Contro Bedienungsanleitung

One Forall

One Forall Essence 4 Bedienungsanleitung

One Forall

One Forall URC 1921 Bedienungsanleitung

One Forall

One Forall URC-3605 Bedienungsanleitung

One Forall

One Forall URC 7945 Bedienungsanleitung

One Forall

One Forall SAMSUNG URC-4910 Bedienungsanleitung

One Forall

One Forall Cinema 6+ URC 6800 Administratorhandbuch

One Forall

One Forall ONE FOR ALL URC3110 Bedienungsanleitung

One Forall

One Forall SAMSUNG URC-1310 Bedienungsanleitung

One Forall

One Forall Video Expert URC 4081 Bedienungsanleitung

One Forall

One Forall URC7125 Bedienungsanleitung

One Forall

One Forall 6-DEVICE PVR Bedienungsanleitung

One Forall

One Forall URC-3435 Bedienungsanleitung

One Forall

One Forall URC-4330 Bedienungsanleitung

One Forall

One Forall WM4440 Bedienungsanleitung

One Forall

One Forall AR90 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung