One Forall URC 8090 Bedienungsanleitung

INSTALLING THE BATTERIES

Your

Home Producer 8

requires four (4) new AAA

alkaline batteries. To install the batteries:

1On the back of the

Home Producer

, press down on the black battery

cover near the indentation where

the black and silver sections meet

and push/slide the cover off (see

illustration).

2Match the + and - marks on the

batteries to the + and - marks in the

battery case, then insert the

batteries.

3Slide the battery cover back into

place.

4Test the unit by pressing POWER.

If the batteries are inserted correctly,

the red light will blink.

NOTE: Immediately before removing the batteries, please refer to

page 8 and re-enter your TV's setup code. This will allow the Home

Producer 8 to retain its memory upon removing the batteries. If you

do not, upon entering your fresh batteries, the LCD screen may say

[MEM FAULT]. If [MEM FAULT] does appear on the LCD screen,

press and hold MAGIC until the display screen changes from [TV and

the TIME] to [TIMED SEQ]. Press the MENU - key one time. The

display screen will change to [CODE SET UP]. Press SELECT. The

display will change to [DEV SET UP]. Press SELECT and the display

screen will change to [TV]. Enter code 9-6-1. Press SELECT. Now

press and hold MAGIC until the display screen changes from [TV and

the TIME] to [TIMED SEQ]. Press the MENU + key one time. The

display screen will change to [CONFIGURE]. Press SELECT. The

display screen will change to [THEATR SEL]. Press MENU + once.

The display screen will change to [SERVICE]. Press SELECT. The

display screen will change to [MFG RESET]. Press SELECT. The

display screen will change to [SEL TO RS]. Press SELECT. The

display screen will then return to [TV and the TIME].

POWER

URC 8090

Home Producer

User Manual

USING YOUR A/V PRODUCER Feature Function

The MAGIC key is used to access

the LCD screen menu and program

your

Home Producer 8.

The TV, VCR,CBL,SAT,AMP,

TUN,CD, and AUX1 keys are used

to select the home entertainment

component you want to control. If

your component does not respond

when you press a key on the

remote control, press either the TV,

VCR,CBL,SAT,AMP,TUN,CD,

and AUX1 key to tell the remote

control which component you would

like to operate.

The HOMETHEATER key is used

to select the Home Theater mode of

the

Home Producer 8.

The ESC (Escape) key is used to

exit the LCD Screen menu.

The LITE key is used to turn ON

and OFF the

Home Producer 8’s

backlit keypad and LCD screen.

Press the LITE key once to turn

ON the backlight. The

Home

Producer 8’s

backlight will stay on

for 10 seconds after the last key

press and re-activates with the

press of a key. To de-activate the

backlight, press the LITE key again.

The POWER key controls power ON

and OFF.

The VOL + (Volume Up), VOL-

(Volume Down) and MUTE keys

control the volume the same as the

Volume Up and Down and Mute

keys on your original remote.

ESC

LITE

MAGIC

VCR

CBL

SAT

AMP

TUN

AUX1

HOME THEATER

POWER

VOL-VOL+

MUTE

VOL-VOL+

CH-CH+

POWER

MUTE

SLEEP

AMP TUN TV CBL

CD VCR SAT

AUX1

HOME THEATER

SUR

SHIFT

ESC

CENTER

SELECT

PREVCH

DISP

PIP

FREEZE

SWAP

MOVE

PIP

LITE

MAGIC

CLEAR

PROG

REAR

MENU+

MENU-

ENTER

AUD

SLOW- SLOW SLOW+

VID

TV/SAT

REW PL FF

REC

STOP

EJECT X2

PAU

Features and Functions

The illustration below and the chart on the next two

pages describe the features and the functions of the

Home Producer 8’s

keypad. The following keys will

always have the same function, regardless of which

component you are controlling. For an explanation

of what each key does by component type, please

use the index at the rear of the manual (pages 42-54).

SETTING THE CLOCK

Feature Function

The CH + (Channel Up) and CH-

(Channel Down) keys change

channels the same as the Channel

Up and Down keys on your

original remote.

The AUD and VID macro keys

memorize up to 15 keystrokes that

can be accessed in sequence at the

press of a single key. These

keys are not mode specific.

The SHIFT key accesses advanced

features that are mapped under

the following keys: CENTER, MENU,

SELECT,MUTE, PREV CH,

PIP,REW, PLAY

FF,STOP and

PAUSE.

CH- CH+

AUD

VID

SHIFT

MAGIC

MENU-

SELECT

MENU-

SELECT

To set up the CLOCK/TIME on the display screen:

1Press and hold MAGIC until the

display screen changes from

[DEVICE and the TIME] to

[TIMED SEQ].

2Press the MENU - key twice, the

display will change to [CONFIGURE].

Press SELECT, the display will

change to [THEATR SEL].

3Press MENU - one time, the display

will change to [TIME SETUP].

Press SELECT again.

4The display will change to [TIME]

and the first digit in the time will

blink. Enter either a 0 or a 1, then

the next digit in the time will begin to

blink, continue entering the time

until all four digits of the time have

been set.

5After the time has been set, AM/PM

will then blink. Press MENU - to

toggle between AM and PM, once

AM or PM is selected, press

SELECT.

6The display will then change to the

day of the week (MON, TUE, WED,

THU, FRI, SAT or SUN). Use

MENU - to toggle through the days

until the proper day of the week is

displayed on the screen, then press

SELECT. The display will return to

the [DEVICE and the TIME] screen

with the correct time on the display.

0 - 9

SELECT

MENU-

SELECT

x 2

Set Up Codes forTVs (cont.)

Broksonic 236, 463, 180,

003

Candle 030, 056, 186,

046

Carnivale 030

Carver 054 , 187, 170

CCE 217

Celebrity 000

Citizen 092, 060, 030,

056, 280, 186,

046, 039

Clairtone 185

Concerto 056

Contec 180, 185, 157,

158

Craig 180

Crown 180, 039

Curtis Mathes 047, 060, 054,

154, 030, 039

CXC 180

Daewoo 451, 092, 019,

039, 091

Daytron 056, 092

Dumont 017, 019

Dynatech 046

Electroband 000, 185

Electrohome 381, 389, 409

Emerson 463, 236, 180,

177, 179, 280,

178, 282, 154,

019, 185, 038,

039, 158, 181,

182, 183, 270

Envision 030

Fisher 154, 159

Fujitsu 179

Funai 171, 179, 180

Futuretech 180

GE 047, 451, 051,

021, 027, 282,

055, 178, 029,

135, 174, 279

Gibralter 017, 019, 030

Goldstar 056, 019, 030,

178, 001, 002,

032

Grunpy 179, 180

Hallmark 178, 179, 236,

019

Harvard 180, 236, 178,

179

Hitachi 145, 151, 056,

032, 038, 279,

409, 413

Infinity 054

Janeil 046

JBL 054

JCB 000

JVC 053, 036, 182,

169, 069, 160

Kawasho 158

Kaypani 052

KEC 180, 060

Kenwood 019, 030

Kloss 030, 046, 024

KMC 106

KTV 030, 039, 180,

183, 185, 217,

280

Logik 016, 180, 236

Luxman 056

LXI 047, 054, 148,

154, 156, 178

Magnasonic 054, 156, 179,

092, 030, 093,

019, 003

Magnavox 054, 096, 186,

030, 187, 020,

024, 028, 036,

386

Majestic 016, 017

Marantz 030, 054, 096,

187

Matsushita 250

Megatron 003, 145, 178

MEI 185, 051

Memorex 016, 056, 106,

150, 154, 178

MGA 150, 155, 178,

030, 019, 093

Midland 017, 032, 039,

047, 051, 135

Minutz 021

Mitsubishi 150, 155, 178,

030, 019, 093,

241

Motorola 093, 055, 054,

150, 051

MTC 060, 056, 030,

019, 185, 091

Multitech 180, 217, 019

NAD 156, 166, 178,

019

NEC 019, 030, 036,

056

Nikko 030, 092, 178

Noblex 430

Noshi 018

NTC 092

Onwa 180

Optimus 154, 166, 250,

463, 180, 179,

150, 165

Optonica 093, 165

Orion 236, 463, 180,

179

Panasonic 250, 051, 055,

054

Penney 047, 051, 060,

019, 018, 030,

156, 021, 027,

178, 003, 135,

039, 002, 032,

149

Philco 054, 096, 030,

019, 187, 020,

028

Philips 054, 096, 030,

019, 187, 020,

028

Pilot 019, 030, 039

Pioneer 166, 038

Portland 092, 019, 039

Prism 051, 055

Proscan 047

Proton 003, 052, 178

Pulsar 092, 017, 019

Quasar 250, 051, 055,

165

RadioShack 019, 030, 032,

039, 047, 056,

154, 165, 178,

180, 409

RCA 047, 018, 019,

029, 038, 090,

135, 147, 278,

093

SETTING UP YOUR HOME ENTERTAINMENT

COMPONENTS

To Set UpYourTelevision

1Turn on your TV.

2Press and release the TV key.

3Press and hold MAGIC until the

display screen changes from

[TV and the TIME] to [TIMED SEQ].

4Press the MENU - key one time.

The display screen will change to

[CODE SET UP]. Press SELECT.

The display will change to

[DEV SET UP].

5Press SELECT and the display

screen will change to [TV].

6Enter the first TV code listed for your

brand in the “Set Up Codes for TVs”

on pages 8-10, then press SELECT.

Point the remote control at the TV

and press POWER. Your Television

should turn OFF. If yourTV turns

OFF, press the ESC key to return

the display to [TV and the TIME]. If

your TV does not turn OFF, enter the

next code in the code list then press

SELECT followed by POWER again.

Once the correct code is entered,

press the ESC key to return the

display to [TV and the TIME].

For a detailed explanation of what function each key

will perform in the TV mode, please refer to page 45

in the index.

MAGIC

MENU-

SELECT

POWER

ESC

Anam National 055

AOC 030, 019, 185,

080, 056, 003,

052

Archer 003

Audiovox 180, 003

Belcor 019, 030

Bell & Howell 016, 154, 179,

180

Bradford 180

Brockwood 019

A-Mark 003

Abex 032

Admiral 093, 016, 180,

165, 179

Adventura 046

Aiko 092

Akai 030, 056, 145,

151

Alleron 179, 183

Ambassador 177

Anam 180

Set Up Codes forTVs

6Enter the first VCR code listed for

your brand in the “Set Up Codes for

VCRs” on pages 11-12, then press

SELECT. Point the remote control at

theVCR and press POWER or PLAY.

Your VCR should turn OFF or start to

play. If your VCR turns OFF or starts

to play, press the ESC key to return

the display to [VCR and the TIME]. If

yourVCR does not turn OFF or start

to play, enter the next code in the

code list then press SELECT followed

by POWER or PLAY again. Once the

correct code is entered, press the

ESC key to return the display to [VCR

and the TIME].

For a detailed explanation of what function each key

will perform in the VCR mode, please refer to page

47 in the index.

Realistic 019, 030, 032,

039, 056, 154,

165, 178, 180

Rhapsody 183, 185

Runco 017, 030

Sampo 030, 032, 039,

052

Samsung 060, 019, 030,

032, 056, 178,

427, 482

Samsux 039

Sanyo 154, 159, 146

Scimitsu 019

Scotch 178

Scott 019, 178, 179,

180, 236

Sears 047, 054, 056,

146, 148, 149,

154, 156, 159,

171, 178, 179

Sharp 093, 039, 153,

157, 165, 386

Shogun 019

Signature 2000 016, 047, 054,

019

Simpson 186, 187, 030

Sony 000, 080

Soundesign 178, 179, 180,

186

Spectricon 003, 180, 030,

019, 056

Squareview 171

SSS 019, 180, 236

Starlite 180, 236, 019

Supre-Macy 046, 186

Supreme 000

Set Up Codes forTVs (cont.)

Sylvania 054, 096, 030,

187, 186, 020,

028

Symphonic 171, 179, 180

Tandy 093, 165, 054,

047, 039

Tatung 055, 051, 003

Technics 051, 250, 055

Technol Ace 179

Techwood 003, 051, 056

Teknika 092, 054, 060,

056, 019, 015,

180, 179, 186,

150, 039, 312

TMK 056, 177, 178,

236

Toshiba 156, 154, 060,

036, 149

Tosonic 185

Totevision 039

Trical 157

Universal 027, 021, 047

Vector Research 030

Victor 053

Vidikron 054, 242

Vidtech 019, 036, 178

Viking 046

Wards 154, 016, 096,

030, 056, 165,

019, 021, 027,

020, 178, 179,

080, 174, 028,

029

Zenith 017, 092, 016

Zonda 003

SELECT

POWER

To Set UpYourVCR orTV/VCR Combinations

1Turn on your VCR and insert a tape.

2Press and release the VCR key.

3Press and hold MAGIC until the

display screen changes from

[VCR and theTIME] to [TIMED SEQ].

4Press the MENU - key one time.

The display screen will change to

[CODE SET UP]. Press SELECT.

The display will change to

[DEV SET UP].

5Press SELECT and the display

screen will change to [VCR].

VCR

MAGIC

MENU-

SELECT

Set Up Codes For VCRs

Admiral 048

Adventura 000

Aiko 278

Aiwa 000

Akai 041, 049, 053,

061, 106

American High 035, 081

Asha 240

Audiovox 037, 038

Beaumark 240

Bell & Howell 104, 048, 046

Broksonic 184, 209, 121,

211, 295, 361,

002, 479

Calix 037

Candle 037, 038

Canon 035

Capehart 020

Carver 081

CCE 072, 278

Citizen 037, 278, 240,

035, 000

Colt 072

Craig 037, 047, 072,

240, 271

Curtis Mathes 035, 041, 060,

202

Cybernex 051, 240

Daewoo 020, 045, 278,

046

Daytron 020, 278

Dynatech 000

Electrohome 037, 240, 043

Electrophonic 037

Emerex 032

Emerson 184, 209, 479,

000, 002, 036,

037, 043, 061,

068, 121, 208,

211, 212, 278,

294, 295, 361

Fisher 047, 054, 066,

104, 046

Fuji 033, 035, 032,

034

Funai 000, 278, 072,

240

Garrard 000

GE 035, 060, 065,

202, 048

Go Video 232, 279, 240,

526

Goldstar 037, 038, 278

Gradiente 000

Harley Davidson 000

Harman/Kardon 038, 075

Harwood 068, 072

Havard 072

Headquarter 046

HI-Q 047

Hitachi 042, 000, 041,

065, 105, 166,

396

Jensen 041, 008, 067

JVC 008, 041, 067,

206

KEC 037, 278

Kenwood 038, 041, 067,

008

KLH 072

Kodak 035, 037

Lloyds 208, 072, 038

Logik 072

LXI 037, 035, 042,

046, 047, 054,

066, 104, 105

Magnasonic 240, 037, 278,

020, 072

Magnavox 035, 039, 081,

110, 149

Magnin 240

Marantz 035, 081

Marta 037

Matsushita 035, 162, 454,

081, 110

MEI 035

Memorex 000, 035, 037,

039, 046, 047,

048, 104, 240

MGA 043, 061

MGN Technology 240

Minolta 042, 105

Mitsubishi 043, 061, 067,

075, 173, 008,

048

ESC

Runco 039

Salora 075

Samsung 240, 045, 051,

053

Sanky 039, 048

Sansui 041, 067, 271,

209, 072, 002,

479, 008

Sanyo 104, 046, 047,

054, 240

Scott 043, 045, 121,

184, 210, 211,

212

Sears 035, 037, 042,

046, 047, 054,

066, 104, 105,

000

Sharp 048, 062

Shintom 072, 000, 240

Shogun 051, 240

Singer 072, 037, 240

Sony 032, 033, 034,

035

STS 042

Sylvania 000, 035, 043,

081, 110

Symphonic 000

Tatung 041, 067, 000

TEAC 000, 041

Technics 035, 162, 454

Teknika 000, 035, 037

TMK 036, 208, 240

Toshiba 043, 045, 060,

066, 210, 212,

366

Totevision 037, 240

Unitech 240

Vector 045

Vector Research 038, 040

Video Concepts 040, 045, 061

Videosonic 240, 000, 072

Wards 000, 035, 042,

047, 048, 060,

062, 072, 149,

212, 240, 202

XR-1000 000, 035, 072,

240

Yamaha 038

Zenith 039, 033, 034,

000

To Set UpYour Cable Box:

1Turn on your Cable Box.

2Press and release the CBL key.

3Press and hold MAGIC until the

display screen changes from

[CABLE and theTIME] to [TIMED

SEQ].

4Press the MENU - key one time.

The display screen will change to

[CODE SET UP]. Press SELECT.

The display will change to

[DEV SET UP].

5Press SELECT and the display

screen will change to [CABLE].

6Enter the first Cable Box code listed

for your brand in the “Set Up Codes

for Cable Boxes” on page 14, then

press SELECT. Point the remote

control at the Cable Box and press

POWER. Your Cable Box should

turn OFF. If your Cable Box turns

OFF, press the ESC key to return

the display to [CABLE and the

TIME]. If your Cable Box does not

turn OFF, enter the next code in the

code list then press SELECT

followed by POWER again. Once

the correct code is entered, press

the ESC key to return the display to

[CABLE and the TIME].

Note: If your original Scientific Atlanta remote control

does not have an “ON” key, press CH+ or one of the

digit keys on the Home Producer 8 to turn your

Cable Box on.

For a detailed explanation of what function each key

will perform in the Cable mode, please refer to page

48 in the index.

Set Up Codes For VCRs (Cont.)

Motorola 035, 048

MTC 000, 240

Multitech 000, 072

NAD 104

NEC 038, 040, 041,

067, 104, 008

Nikko 037

Nikon 034

Noblex 240

Olympus 035

Optimus 037, 048, 104,

162, 454

Optonica 062

Orion 184, 209, 000,

479, 002, 036,

037, 043, 061,

068, 121, 028,

211, 212, 278,

294, 295, 361

Panasonic 035, 162, 254,

378, 454

Penney 035, 037, 038,

040, 042, 054,

240

Pentax 042, 065, 105

Philco 035, 081, 110

Philips 035, 062, 081,

110

Pilot 037

Pioneer 067, 008

Portland 020

Proscan 060, 202

Protec 072

Pulsar 039, 051, 240,

278

Quarter 046

Quartz 046

Quasar 035, 162, 454

RadioShack 000, 037, 035,

048

Radix 037

Randex 037

RCA 060, 202, 042,

149, 048, 065,

105, 106, 035

Realistic 000, 035, 037,

046, 047, 048,

062, 066, 104,

240

Ricoh 034, 035

Set Up Codes forTV/VCR Combinations

American High 035*

Broksonic 002, 294*, 479

Colt 072

Curtis Mathes 035*

Daewoo 278

Emerson 002, 294*, 479

Funai 000

GE 035*, 060*,

048*, 240

Harley Davidson 000

Hitachi 035*, 000

HQ 000

Lloyd's 000

Magnavox 000, 035*, 081*

Magnin 240

Memorex 037, 162*

MGA 240

Mitsubishi 048*

Orion 002, 294*, 479

Panasonic 035*, 162*

Penney 035*, 240, 162*

Quasar 035*, 162*

RCA 060*, 035*,

048*

Sansui 000, 479

Sanyo 240

Sears 000, 037

Sony 032*

Symphonic 000

Zenith 000, 037

CBL

MAGIC

MENU-

SELECT

POWER

ESC

Note*:

TV/VCRs working on 032 will need TV code 000 for volume control.

TV/VCRs working on 035 will need TV code 051 for volume control.

TV/VCRs working on 048 will need TV code 093 for volume control.

TV/VCRs working on 060 will need TV code 047 for volume control.

TV/VCRs working on 081 will need TV code 054 for volume control.

TV/VCRs working on 162 will need TV code 250 for volume control.

TV/VCRs working on 294 will need TV code 236 for volume control.

Philips 025, 027, 031,

153, 242, 290,

334

Pioneer 533, 144, 023,

260

Popular Mechanics 400

Prelude 770

Pulsar 000

RadioShack 797

RCA 021

Realistic 207

Recoton 400

Regal 020, 259, 273,

279

Regency 002

Rembrandt 011, 153

Runco 000

Samsung 040, 144

Scientific Atlanta 008, 477, 017,

006

Signal 015, 040

Signature 011

SL Marx 040

Sprucer 021, 307

Starcom 003, 015

Stargate 015, 040, 770

Starquest 015

Starsight 542

Sylvania 001

Tandy 258

TeleCaption 221

Teleview 040, 063

Texscan 001

Timeless 418

Tocom 012, 013

Toshiba 000

Tusa 015

TV86 063, 040

Unika 022, 153, 207

United Artists 007

United Cable 003

Universal 022, 077, 153,

191, 207

Videoway 250

Viewstar 027, 060, 063,

211, 258

Zenith 000, 525

Zentek 400

5Press SELECT and the display

screen will change to [SAT].

6Enter the first Satellite code listed

for your brand in the “Set Up Codes

for Satellites” on page 15, then

press SELECT. Point the remote

control at the Satellite and press

POWER. Your Satellite should turn

OFF. If your Satellite turns OFF,

press the ESC key to return the

display to [SAT and the TIME]. If

your Satellite does not turn OFF,

enter the next code in the code list

then press SELECT followed by

POWER again. Once the correct

code is entered, press the ESC key

to return the display to [SAT and the

TIME].

For a detailed explanation of what function each key

will perform in the Satellite mode, please refer to

page 52 in the index.

ABC 003, 014, 007,

008, 011, 017,

001, 013

Allegro 153, 000, 315,

191

Antronix 022, 207

Archer 022, 153, 207,

797

Cabletenna 022

Cableview 022

Century 153

Citizen 153, 315

Colour Voice 025, 031

Comband 232, 233

Comtronics Eagle 040, 060, 008

Contec 019

Eastern 002

Everquest 015, 040

Focus 400

Garrard 153

GC Electronics 207

GE 232, 233

Gemini 015, 057, 242

General Instrument 476, 276, 003,

014, 011

Goldstar 040, 144

Hamlin 009, 020, 034,

259, 273

Hitachi 011

Hytex 007

Infinity 770

Jasco 153, 315

Jerrold 003, 014, 476,

012, 011, 015,

024, 276

Macom 033

Magnavox 027, 334

Memorex 000

Movie Time 063, 156

Novaplex 618

Novavision 008, 017, 477

NSC 063, 156

Oak 007, 019

Omega 015

Panasonic 000, 021, 107

Panther 637

Paragon 000

Set Up Codes For Cable Boxes

SAT

MAGIC

MENU-

SELECT

POWER

ESC

To Set UpYour DSS or Satellite Receiver

1Turn on your DSS or Satellite

Receiver.

2Press and release the SAT key.

3Press and hold MAGIC until the

display screen changes from

[SAT and theTIME] to [TIMED SEQ].

4Press the MENU - key one time.

The display screen will change to

[CODE SET UP]. Press SELECT.

The display will change to

[DEV SET UP].

Set Up Codes for DSS and Satellite Receivers

AlphaStar DSS 772

Amplica 072

Amway 043, 075

Astro Industries 095

BSR 095

Cable Innovations 554, 555

Capetronic 095

Century 538

Channel Master 018, 212

Chaparral 053, 209, 216

Citoh 164

Conifer 004

Curtis Mathes 061, 072

Drake 018, 064, 149,

245

DX Antenna 041

Echostar 148, 159, 269,

280

Echostar DSS 775

General Instrument 050, 361, 554,

555

Hitachi DSS 819, 749

Homecable 238

HTS DSS 775

Hughes DSS 749, 819

Hytek 095

Intersat 043

IQ 210

Janeil 152

Jerrold Primestar 627

Jerrold 361

Legend 269

Macom 018, 050, 061

Magnavox DSS 724, 722

Memorex 269

Norsat 004

Panasonic 152

Panasonic DSS 701

Pansat 647

Philips 200

Philips DSS 724, 722

Pico 075

Primestar DSS 627

Prosat 158

RadioShack 554

Ramsey 075

RCA DSS 566

Realistic 051, 052

Sony DSS 639

Star Trak 180, 421, 547

Strong 421

STS 041, 210

Toshiba 061, 082

Toshiba DSS 790

Uniden 052, 074, 076,

238, 296, 370,

554, 555

Uniden DSS 724, 722

Zenith 061, 064

1Turn on your CD Player and insert a

disc.

2Press and release the CD key.

3Press and hold MAGIC until the

display screen changes from

[CD and the TIME] to [TIMED SEQ].

4Press the MENU - key one time.

The display screen will change to

[CODE SET UP]. Press SELECT.

The display will change to

[DEV SET UP].

5Press SELECT and the display

screen will change to [CD].

6Enter the first CD code listed for

your brand in the “Set Up Codes for

CD Players” on pages 17-18, then

press SELECT. Point the remote

control at the CD Player and press

PLAY. Your CD Player should start

to play your disc. If your CD Player

plays your disc, press the ESC key

to return the display to [CD and the

TIME]. If your CD Player does not

play your disc, enter the next code in

the code list then press SELECT

followed by PLAY again. Once the

correct code is entered, press the

ESC key to return the display to

[CD and the TIME].

For a detailed explanation of what function each key

will perform in the CD mode, please refer to page 56

in the index.

To Set UpYour CD Player:

Set Up Codes for CD Player

Acoustic Research 123

ADC 018, 033

Adcom 155, 234

Aiwa 012, 124, 157

Akai 156, 676

Alpine 341

Audio Alchemy 194

Audio-Technica 170

BSR 194, 245

Burmester 420

California Audio Lab 029

Capetronic 237

Carrera 194

Carver 157, 179, 299,

365, 437

Craig 615

Crown 122

DAK 245

Denon 003, 034

DKK 000

Emerson 155, 164, 305,

469

Fisher 048, 088, 174,

179, 342

Garrard 245, 280, 393,

420, 425, 633

GE 009, 334

Genexxa 032, 164, 305

Goldstar 030, 417, 525

Gradiente 558

Harman/Kardon 108, 426

Hitachi 032, 139, 155

1Turn on your Laser Disc Player and

insert a disc.

2Press and release the AUX 1 key.

3Press and hold MAGIC until the

display screen changes from

[LDP and theTIME] to [TIMED SEQ].

4Press the MENU - key one time.

The display screen will change to

[CODE SET UP]. Press SELECT.

The display will change to

[DEV SET UP].

5Press SELECT and the display

screen will change to [LDP].

6Enter the first Laser Disc code listed

for your brand in the “Set Up Codes

for Laser Disc Players” on page 16,

then press SELECT. Point the

remote control at the Laser Disc

Player and press POWER or PLAY.

Your Laser Disc Player should turn

OFF or play your disc. If your Laser

Disc Player turns OFF or plays your

disc, press the ESC key to return

the display to [LDP and the TIME]. If

your Laser Disc Player does not

turn OFF or play your disc, enter the

next code in the code list then press

SELECT followed by POWER or

PLAY again. Once the correct code

is entered, press the ESC key to

return the display to

[LDP and the TIME].

For a detailed explanation of what function each key

will perform in the AUX1 mode, please refer to page

50 in this index.

To Set UpYour Laser Disc Player:

Aiwa 203

Carver 064, 194, 323

Denon 172, 241

Disco Vision 023

Funai 203

Hitachi 023

Magnavox 194, 217, 241

Marantz 064, 194

Mitsubishi 059

NAD 059

NEC 286

Panasonic 204

Philips 064, 194

Pioneer 059, 023

Quasar 204

RCA 128, 351

Realistic 203

Samsung 323

Sega 023

Sony 193, 201, 270

Theta Digital 194

Yamaha 217

Set Up Codes for Laser Disc Players

AUX1

MAGIC

MENU-

SELECT

POWER

MAGIC

MENU-

SELECT

ESC

ADC 531

Adcom 616

Admiral 182

Aiwa 121, 125, 158,

189, 405

Akai 076, 224

Bose 639

Capetronic 531

Carver 008, 042, 189,

360, 412

Casio 195, 201

Clarinette 195

Curtis Mathes 201

Denon 004, 273, 771,

386

Emerson 255, 424

Fisher 042, 219, 360

Garrard 281, 424, 440,

463

Goldstar 281, 386

Harman/Kardon 110

Hitachi 386

Inkel 062

JVC 074, 464

Kenwood 027, 077, 186,

313, 314

Koss 255, 424

Lloyd 195

Luxman 166

LXI 181

Magnavox 128, 189, 195,

531

Marantz 189, 006, 039,

128, 200, 412

MCS 039, 201, 346

Modulaire 195

NAD 320

Nakamichi 347

NEC 235

Onkyo 135, 100, 119,

380

Optimus 080, 177, 181,

186, 219, 440,

531, 670

Panasonic 039, 518, 309

Penney 195, 201

Philips 189, 412

Pioneer 014, 080, 150,

289, 531, 630

Quasar 039

RCA 054, 346, 360,

530, 531

Realistic 163, 181, 182,

195

Sansui 189, 346

Sanyo 219

Scott 105, 163, 322,

390

Sears 201

Sharp 186

Sherwood 062, 491, 502

Sonic 281

Sony 158, 238

Soundesign 670

Symphonic 182

TEAC 463, 163, 298,

387

Technics 039, 208, 309,

518

Techwood 281

Victor 074

Wards 014, 042, 054,

080, 158, 189

Yamaha 176, 081, 082,

186

Yorx 195

Zenith 281

Proton 152, 157

QED 157

Quasar 029

RCA 009, 053, 155,

179, 305, 764

Realistic 155, 164, 175,

179, 180, 237,

420

Rotel 157, 420

SAE 157

Samsung 524

Sansui 157, 202, 216,

305

Sanyo 087, 179

Schneider 560

Scott 155, 164, 305

Sears 305

Sharp 037, 180, 262,

265

Sherwood 065, 114, 180,

196, 426

Shure 043

Signature 108

Signature 2000 108

Sony 000, 185, 490,

604, 605, 727

Soundesign 145, 425

STS 018

Symphonic 183

Tascam 420

TEAC 016, 045, 153,

174, 180, 183,

378, 393, 420

Technics 029, 207, 303

Toshiba 019, 299

Vector Research 033, 194, 417

Victor 072

Wards 108

Yamaha 036, 170, 187,

261

Yorx 461

Zenith 615

Set Up Codes for CD Player (Cont.)

Inkel 065

JVC 072, 655, 658

Kenwood 028, 037, 048,

190, 337, 338,

339, 340, 523

Kodak 287

Koss 734

Krell 157

Kyocera 018

Luxman 093, 149, 327

LXI 305

Magnavox 038, 129, 157,

526

Marantz 005, 029, 038,

157, 180, 435

McIntosh 287

MCS 029, 043, 345,

454

MGA 083

Mission 157

Mitsubishi 083, 098

MTC 420

NAD 019, 299

Nakamichi 147

NEC 043, 130, 234

Nikko 164, 169, 170,

174, 525

NSM 157

Onkyo 101, 102, 138,

381

Optimus 000, 032, 037,

087, 175, 179,

194, 196, 280,

305, 342, 420,

426, 437, 468,

536

Panasonic 029, 367, 388,

752

Parasound 194

Philco 603, 734

Philips 157, 274, 287

Pioneer 032, 244, 305,

468, 551

To Set UpYourTuner/Receiver

1Turn on your Tuner/Receiver.

2Press and release the TUN key.

3Press and hold MAGIC until the

display screen changes from

[TUN and theTIME] to [TIMED SEQ].

4Press the MENU - key one time.

The display screen will change to

[CODE SET UP]. Press SELECT.

The display will change to

[DEV SET UP].

5Press SELECT and the display

screen will change to [TUNER].

6Enter the first Tuner code listed for

TUN

MAGIC

MENU-

SELECT

Set Up Codes forTuner/Receivers

SELECT

POWER

ESC

your brand in the “Set Up Codes for

Tuner/Receivers” on page 19, then

press SELECT. Point the remote

control at the Tuner/Receiver and

press POWER. Your Tuner/Receiver

should turn OFF. If yourTuner/

Receiver turns OFF, press the ESC

key to return the display to

[TUN and the TIME]. If your Tuner/

Receiver does not turn OFF, enter

the next code in the code list then

press SELECT followed by POWER

again. Once the correct code is

entered, press the ESC key to return

the display to [TUN and theTIME].

Note: If your Tuner/Receiver does not respond to the

codes listed for your brand, try the Amplifier codes

listed for your brand on page 20.

For a detailed explanation of what function each key

will perform in the Tuner mode, please refer to page

54 in the index.

SELECT

SEARCHING FOR YOUR CODE

If your components do not respond to the

Home

Producer 8

after trying all of the codes listed for your

brand, or if your brand is not listed at all, try

searching for your code. For example, after trying all

of the codes for your brand of TV, you still cannot

get the

Home Producer 8

to operate your TV, then:

1Press and release the TV key.

2Press and hold MAGIC until the

display screen changes from

[TV and the TIME] to [TIMED SEQ].

3Press the MENU - key one time.

The display screen will change to

[CODE SET UP]. Press SELECT.

The display will change to

[DEV SET UP].

4Press the MENU - key one time.

The display screen will change to

[DEV SEARCH]. Press SELECT.

The display will change to

[TV and XXX].

Note: XXX represents the last 3 digit code that was

entered prior to starting the search.

5Press POWER. If your TV turns

OFF, press SELECT to lock in your

code and return the display to

[TV and the TIME]. If your TV does

not turn OFF, press MENU -. The

next available code will appear on

the display screen, then press

POWER again. Continue to press

POWER then MENU - until your TV

turns OFF. Once your TV turns

OFF, press SELECT to lock in your

code and return the display to

[TV and the TIME].

Note: If you are searching for your VCR, CD Player,

Laser Disc Player or DVD Player code, you may

want to use PLAY instead of POWER. Once your

component plays, press SELECT to lock in your

code.

1 Turn on your amplifier.

2 Press and release the AMP key.

3 Press and hold MAGIC until the

display screen changes from

[AMP and theTIME] to [TIMED SEQ].

4 Press the MENU - key one time.

The display screen will change to

[CODE SET UP]. Press SELECT.

The display will change to

[DEV SET UP].

5 Press SELECT and the display

screen will change to [AMP].

6 Enter the first Amplifier code listed

for your brand in the “Set Up Codes

for Amplifiers” on page 20, then

press SELECT. Point the remote

control at the Amplifier and press

POWER. Your Amplifier should turn

OFF. If your Amplifier turns OFF,

press the ESC key to return the

display to [AMP and the TIME]. If

your Amplifier does not turn OFF,

enter the next code in the code list

then press SELECT followed by

POWER again. Once the correct

code is entered, press the ESC key

to return the display to

[AMP and the TIME].

For a detailed explanation of what function each key

will perform in the Amplifier mode, please refer to

page 55 in the index.

To Set UpYour Amplifier

Set Up Codes for Audio Amplifiers

Accuphase 382

Acurus 765

AudioSource 011

Carver 269

Denon 160

Elan 647

Forte 606

GE 078

Goldstar 031

Harman/Kardon 106

JVC 331

Kenwood 356

Luxman 165

Magnavox 269

Marantz 269, 321

McIntosh 251

Nakamichi 321

NEC 264

Optimus 013, 300, 395

Panasonic 308

Philips 269

Pioneer 013, 300

Realistic 395

Sansui 321

Shure 264

Sony 220, 689

Soundesign 078, 211

Technics 308

Victor 331

Wards 013, 078, 211

Yamaha 133, 143, 354,

504

AMP

MAGIC

MENU-

SELECT

POWER

ESC

MAGIC

MENU-

SELECT

POWER

SELECT

MENU-

Inhaltsverzeichnis

Andere One Forall Fernbedienung Handbücher

One Forall

One Forall URC-4220 Bedienungsanleitung

One Forall

One Forall URC1281 Bedienungsanleitung

One Forall

One Forall URC 7880 Bedienungsanleitung

One Forall

One Forall URC-7200 Gebrauchs- und Wartungshandbuch

One Forall

One Forall HC-8000 Bedienungsanleitung

One Forall

One Forall OARP05S Bedienungsanleitung

One Forall

One Forall AR90 Bedienungsanleitung

One Forall

One Forall URC2110 Bedienungsanleitung

One Forall

One Forall URC-5650 Cinema 5 Bedienungsanleitung

One Forall

One Forall URC-7140 Bedienungsanleitung

One Forall

One Forall URC-6420 Administratorhandbuch

One Forall

One Forall Xsight Touch Bedienungsanleitung

One Forall

One Forall URC-6131 Bedienungsanleitung

One Forall

One Forall ONE FOR ALL PVR 6 Bedienungsanleitung

One Forall

One Forall XSight Lite Bedienungsanleitung

One Forall

One Forall URC 7120 Bedienungsanleitung

One Forall

One Forall Essence 4 Bedienungsanleitung

One Forall

One Forall Easy 3 series Bedienungsanleitung

One Forall

One Forall URC 5065 Bedienungsanleitung

One Forall

One Forall Smart Contro Bedienungsanleitung

One Forall

One Forall URC-8011 Bedienungsanleitung

One Forall

One Forall URC-9040 Bedienungsanleitung

One Forall

One Forall URC-7140 Technisches Datenblatt

One Forall

One Forall URC-6200 Cinema 6+ Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung