One Forall 3 Zapper Bedienungsanleitung

Universal remote

URC-6530/31

702291

WWW.ONEFORALL.COM 2

Thank you for purchasing the ZAPPER 3 universal remote control

(URC-6532). Your ZAPPER package contains:

• The ZAPPER Remote Control

• The ZAPPER User Guide & Code Book

The User Guide & Code Book explains in simple steps how to set up

and operate your new universal remote control. You may need this

guide again in the future, so please be sure to keep it.

Your ZAPPER needs 2 new “AAA/LRO3” batteries.

Your ZAPPER is designed to let you use one remote to operate your

Television, VCR and Satellite Receiver (or Cable Converter).

About Your ZAPPER

Table of Contents

PICTURE OF THE ONE FOR ALL REMOTE

INSTALLING THE BATTERIES

FEATURES AND FUNCTIONS

SETTING UP THE ZAPPER

Direct Set-Up 6

Search Method 8

Code Blink Out 9

CODELIST

Television 66

Videorecorders 73

Satellite Receivers 76

Cable Converters 80

ADVANCED OPERATION

Controlling Colour & Brightness 10

Scan 10

TROUBLE-SHOOTING

Helpful Hints 11

WWW.ONEFORALL.COM 3

WWW.ONEFORALL.COM 4

Installing The Batteries

The ZAPPER needs 2 new “AAA/LRO3” alkaline batteries.

1Remove the battery cover from the back of the ZAPPER by pressing

down on the tab.

2Match the batteries to the +/- marks inside the battery case, then

insert the batteries.

3Press the battery cover back into place.

See picture of the ZAPPER 3 remote on page 3.

1LED

The LED (Light Emitting Diode) will flash red when a key is pressed

to show the remote is working

2Magic

The MAGIC key is used to set up your ZAPPER and to access special

features.

3Power

The Power key turns your devices both on and off.

4Device Keys

The TV ,VCR and SAT keys select the home entertainment device to

be controlled. Pressing the TV key allows the remote to control the

functions of your Television. After pressing VCR you can operate

your Video Cassette Recorder. After pressing SAT, you can operate

your Satellite Receiver or Cable Converter.

Important notes:

- In order to avoid having to reprogram your ZAPPER after you remove

the batteries, you will need to insert new batteries within 5 minutes.

- Also, it is best that you do not use rechargeable batteries.

- On the inside of the battery compartment door you will find a

label on which to write your set-up codes after your ZAPPER is

set up for your devices. Please write down your codes for easy,

future reference.

Features and Functions

5Mute/OK

The Mute key operates the same function it did on your orginal

remote. It is also used to activate the Scan feature (page 10).

6Volume+/-, Programme +/-

The Volume and Programme keys operate just as on your original

remote control. These keys are also used to program the ZAPPER for

your devices and to control the Colour and Brightness settings of

your television (page 10).

7Video Recorder Keys

After pressing the VCR key, the Video Recorder keys operate the

functions of your Video Recorder. To prevent accidental recordings,

the Record key must be pressed twice.

WWW.ONEFORALL.COM 5

Direct Set-Up

To set up the ZAPPER for your Television, Video and Satellite Receiver (or

Cable Converter) follow the instructions below. To set up your Television:

1Find your Television code in the Set-Up Code section (page

66-80). Codes are listed by brand name. The most popular

codes are listed first. Make sure that your Television is

switched on (not in standby).

2Press and release the TV key to select the device.

3 Press and hold down MAGIC until the red light blinks

twice (it will blink once then twice).

4 Enter your 5-digit code according to the chart below.

The red light will blink twice.

5Now, aim the ZAPPER at your Television and press

POWER. If your Television switches off, your ZAPPER

should be ready to operate your device.

6Turn your device back on and try all the remote’s functi-

ons to ensure they are working properly. If the functions

do not work properly, repeat steps 1-6 using another code

listed under your brand.

7 Write the codes for your TV, VCR and SAT in the

boxes provided on page 7 and inside the battery

compartment for easy future reference.

6WWW.ONEFORALL.COM

Setting Up The ZAPPER

ONE FOR ALL

Acura

Admiral

Adyson

Agazi

AGB

Aiko

11132

122241224223313

14232

21131

31121

142311113211322

224141131412131

2233213444

Volume + = 1

Volume

Programme + = 3

Programme

TV Code

VCR Code

SAT/Cable Code

(Example: To enter the Sony TV code 24432, you would press Volume(-),

Programme(-), Programme(-), Programme(+), Volume(-).

If your device does not respond to the ZAPPER after you have tried all

the codes listed for your brand, try the Search Method.

Make sure you write your correct 5 digit codes in the boxes

provided inside the battery compartment and on this page.

WWW.ONEFORALL.COM 7

Important notes:

- To set up your Video Recorder, Satellite Receiver or Cable Converter,

follow the same instructions above, only press the VCR or SAT key

during step 2.

- Some codes are quite similar. If your device does not respond or is not

functioning properly with one of the codes, follow steps 1-6 with each

code listed for your brand.

- If none of the codes listed for your brand operate your device, follow

the Search Method described in the next section. The Search Method can

be used even if your brand is not listed at all.

- Remember, to control your device after you have programmed it with

the ZAPPER, you must press the device key first (TV, VCR or SAT).

■■ ■■ ■■ ■■ ■■

Volume + = 1

Volume

= 2

Programme

= 4

Programme + = 3

8WWW.ONEFORALL.COM

Search Method

If your Television, VCR, Satellite or Cable Converter does not respond to the

ZAPPER after trying all the codes listed for your brand, try searching for

your code. The Searching Method allows you to find the code of your devi-

ce by scanning through all the codes contained in the memory of the ONE

FOR ALL remote control. To search for your TV code:

1Make sure that your Television is switched on (not in

standby).

2Press the TV key on the ZAPPER.

3 Press and hold down MAGIC until the red light blinks

twice (it will blink once then twice).

4Next, press the Programme(-) key three times.

5Next, slowly alternate between TV and POWER until your

Television turns off. You may have to press these keys

many times, so be patient. Remember, you must aim the

ZAPPER at your device the entire time you are searching

for your code.

6When your device turns off, press and release MAGIC, to

store the code.

The zapper should now be ready to operate your television. Turn your tele-

vision back on and try all the remote’s functions to ensure they are wor-

king properly. If some of the ZAPPER’S commands are not operating cor-

rectly, try the search method again, you may be using the wrong code.

Important notes:

- To search for the code for your VCR, Satellite Receiver or Cable Converter,

follow the same instructions above, only press the VCR or SAT key during

step 2 and 5.

- If your Video’s original remote control does not have a power key, press

PLAY instead of POWER when searching for your code.

- During step 5, you may have to press these keys many times (up to 150!),

so be patient. Remember, you must aim the ZAPPER at your device the

entire time you are searching for your code.

WWW.ONEFORALL.COM 9

Code Blink Out

After you have used the Search Method, you can find out which code the

ZAPPER responded to by blinking back the code. It’s useful to know your

Television, Video, Satellite Receiver or Cable Converter code for future refe-

rence. Remember, you can only blink back your code after the ZAP-

PER is operating your device.

To blink out your TV code:

1Press the TV key on the ZAPPER.

2Press and hold the MAGIC key until the red light

blinks twice (it will blink once then twice).

3Next, press Programme(-), Programme(-),

Programme(+).

4For the first digit of your 5-digit code, press Volume + ( )

and count all the red blinks.

5For the second digit, press Volume - ( ) and count all

the red blinks.

6For the third digit, press Programme(+) and count all

the red blinks.

7For the fourth digit, press Programme(-) and count all

the red blinks.

8For the fifth digit, press MUTE and count all the red blinks.

Now you have your 5-digit code. Write your code in the boxes provided

previously and inside the battery compartment for easy, future reference.

Important note: To blink out the code for your Video Recorder, Satellite

Receiver or Cable Converter, follow the same instructions above, only press

the VCR or SAT key during step 1.

10 WWW.ONEFORALL.COM

Controlling Colour & Brightness

Depending on the functions of your original remote control, the ZAPPER

may operate the colour and brightness settings of your Television.

Scan

Your ZAPPER comes with a special Scan function which lets you “scan”

through every programme available on your TV, VCR, Satellite or Cable Box.

For example, to scan the programmes on your TV:

1Aim the ZAPPER at your TV. Press the TV key. Press and

release MAGIC then press the MUTE key.

The ZAPPER will send the command to advance through

all the programmes available on your Television stopping

at each programme for about three seconds. Remember,

you must aim the ZAPPER at your device the entire time

you are using scan.

2When you find a programme you would like to watch,

simply press any key to stop the Scan feature.

Advanced Operation

then holdPressColour up =

then holdPressColour down =

then holdPressBrightness up =

then holdPressBrightness down =

Note: You have 5 seconds to press the Volume or Channel keys for colour or

brightness adjustment after pressing MAGIC.

Important notes:

- To use Scan with your Video, Satellite or Cable Box, follow the same

instructions above, only press the VCR or SAT key during step 1.

- Scan may not function with devices that did not have a Programme +/- key

on the original remote control.

Andere Handbücher für 3 Zapper

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere One Forall Universalfernbedienung Handbücher

One Forall

One Forall KAMELEON URC-8308 Bedienungsanleitung

One Forall

One Forall SAMSUNG URC-4910 Bedienungsanleitung

One Forall

One Forall URC-3740 Bedienungsanleitung

One Forall

One Forall URC 1811 Bedienungsanleitung

One Forall

One Forall OFA Kameleon URC-6690 Bedienungsanleitung

One Forall

One Forall URC-3445 Bedienungsanleitung

One Forall

One Forall URC 3050 Bedienungsanleitung

One Forall

One Forall URC-3910 Bedienungsanleitung

One Forall

One Forall MF 355RF Bedienungsanleitung

One Forall

One Forall URC 1635 Bedienungsanleitung

One Forall

One Forall URC-4021 Bedienungsanleitung

One Forall

One Forall Home Producer URC 9800 Bedienungsanleitung

One Forall

One Forall URC-7556 Bedienungsanleitung

One Forall

One Forall SmartControl URC-7960 Bedienungsanleitung

One Forall

One Forall (URC-8910) Bedienungsanleitung

One Forall

One Forall URC-7210 Bedienungsanleitung

One Forall

One Forall SMART CONTROL PRO Bedienungsanleitung

One Forall

One Forall 704917 Bedienungsanleitung

One Forall

One Forall URC-1031 Bedienungsanleitung

One Forall

One Forall KAMELEON 8 Bedienungsanleitung

One Forall

One Forall iLifeTV Bedienungsanleitung

One Forall

One Forall A/V Producer URC 8800 Bedienungsanleitung

One Forall

One Forall URC-6211 Bedienungsanleitung

One Forall

One Forall URC-7721 Bedienungsanleitung

Beliebte Universalfernbedienung Handbücher anderer Marken

Pronto

Pronto Peel Bedienungsanleitung

GE 24929 Bedienungsanleitung

Radio Shack

Radio Shack Wireless Remote Control System Bedienungsanleitung

AUVIO

AUVIO Universal Home Theater Remote Bedienungsanleitung

Philips

Philips Icon SRU4106 Bedienungsanleitung

THOMSON

THOMSON ROC4309 Bedienungsanleitung

Philips

Philips pm625S Bedienungsanleitung

GE RM94931 Bedienungsanleitung

RCA

RCA RCU600WMS - Universal Remote Control Bedienungsanleitung

Blackweb

Blackweb BWB17AV002 Bedienungsanleitung

Marmitek

Marmitek DoorGuard 300 Bedienungsanleitung

Chunghop

Chunghop RM-L618 Bedienungsanleitung

GE RM24965 Bedienungsanleitung

Anderic

Anderic KTN828 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Bedienungsanleitung

Medion

Medion E74023 Bedienungsanleitung

intensity

intensity RM02A Bedienungsanleitung

GE RM24950 Bedienungsanleitung