One Forall URC 1635 Bedienungsanleitung

Home

OFA SKY Q

REPLACEMENT REMOTE

UNIVERSAL REPLACEMENT REMOTE

URC 1635 SIMPLE SET UP GUIDE

WELCOME .......................................................................................................................................... 2

INSERT BATTERIES .......................................................................................... 2

KEY TABLE ....................................................................................................................................... 3

LED COLOUR...................................................................................................................................

HOW TO SET UP YOUR REMOTE..................................

A  SIMPLESET................................................................................

B  SETUP BY CODE.........................................................

C  LEARNING.....................................................................................

SPECIAL FEATURES.........................................................................................

KEY MAGIC....................................................................................................................................

CHANNEL SHORTCUT MACROS..............................

HDMI SELECTION..................................................................................................

Home

WELCOME, PREPARE YOUR REMOTE FOR INSTALLATION

OPEN THE BATTERY DOOR.

CLOSE THE BATTERY DOOR.

INSERT 2 AAA BATTERIES.

Home

1. TV Power –

Switches TV on and o.

TV must be set up rst

– see Setup

2. TV Input –

used to select the correct

HDMI input on your TV.

TV must be set up rst

– see Setup

3. Power –

Switches Sky box on and

o.

4. SKY –

Opens Recordings / Menu

5. ? –

Help info / Accessibility

settings

6. i –

More info

7. Search – Search for a

specic show

8. Rewind –

Press repeatedly

to increase speed

9. Play/pause

10. Fast forward –

Press repeatedly

to increase speed

11. Navigation and

OK (select) buttons

12. Back/Dismiss –

Exits menus or recorded

show

13. Home –

Home Screen

14. … –

Opens sidebar / options

15. Volume up, down and

mute. Can be reassigned

to TV or Sound Bar / AV

Receiver

– see Setup

16. R – Record

17. Channel up/down

18. Coloured buttons –

Interactive services.

Can also be used for

channel shortcuts

– see Channel Shortcuts

19. 0-9 – Type in channel

numbers

Thank you for purchasing the One For All UHD Remote.

This remote is intended as a replacement for the Sky Q Infrared remote control, and also oﬀers the

functionality of controlling the volume and power of your TV or Sound Bar / Audio Video Receiver. The

remote also features handy shortcut macros for easy channel zapping and a powerful all on/oﬀ macro.

KEY TABLE

Home

LED COLOUR

HOW TO SET UP YOUR REMOTE

Under the Power key there is a three colour LED, which helps to show which device you are controlling as

well as helping you to set up your remote. The following colours indicate which device is being controlled or

set up:

Green – TV

Amber – Sound Bar / Audio Video Receiver

Red – Sky / Media Box

SETUP

The OFA UHD remote is pre-programed to control your Sky Q box, just insert batteries and it will work

directly. However it can also be programmed to control the Volume, Mute, Input and Power of your TV, and if

required, the Volume and Mute of your Sound Bar. If you have a diﬀerent Sky box or a Digital Media box such

as a Now TV or Apple TV, you can also set this up in place of the Sky Q.

You can set up these devices on your remote as follows:

Home

Sound Bar / Audio Receiver

1Bose

2Denon

3LG

4Marantz

5Onkyo

6Panasonic / Philips

7Pioneer

8Samsung

9Sony

0Yamaha

Other Sky / Digital Media Box (not necessary for Sky Q)

1Apple

2A C Ryan

3Asus

4Dune

5iOmega

6Microsoft

7Roku

8Sky

9Sony

0Western Digital

If the brand of your device is shown below, you can use the SimpleSet system described on the next page:

If the brand of your device is not shown, please proceed to section B - SETUP BY CODE.

A  SIMPLESET

1Bush

2Grundig

3LG

4Panasonic

5Philips

6Samsung / Sharp

7Sony

8TCL / Thomson

9Toshiba

HOW TO SET UP YOUR REMOTE

Home

To set up your device:

Turn on your device (not on standby) and point the OFA remote towards it.

To set up:

Hold down TV Power and SKY Power until the Green LED under the Power key blinks twice.

AUDIO, RECEIVER, SOUND BAR

Hold down Volume + and Volume – until the Amber LED under the Power key blinks twice.

OTHER SKY / DIGITAL MEDIA BOX

Hold down Channel + and Channel - until the red LED under the Power key blinks twice.

Hold down the digit for your brand and device as listed left (e.g. 6 for Samsung TV).

For TV and SKY or Digital Media Box the remote will send Power every 3 seconds until your device

switches oﬀ . For AV Receiver or Sound Bar the remote will send Mute until your device Mutes volume.

As soon as your device switches oﬀ (or mutes), release the digit.

The LED will blink twice and the remote should now operate your device.

• If you ﬁnd one or more keys do not work as you expect, start again at step 2 – the remote will start with

the next code in the memory.

HOW TO SET UP YOUR REMOTE

Home

If the brand of your device is not listed in the SimpleSet feature, you can set up by trying codes individually.

To do this:

Turn on your device (not on standby) and point the OFA remote towards it.

To set up:

Hold down TV Power and SKY Power until the Green LED under the Power key blinks twice.

AUDIO ¬RECEIVER, SOUND BAR

Hold down Volume + and Volume – until the Amber LED under the Power key blinks twice.

OTHER SKY / DIGITAL MEDIA BOX

Hold down Channel + and Channel - until the red LED under the Power key blinks twice.

Enter the ﬁrst 4 digit code listed for your brand (e.g. 4142 for Technika).

The LED will blink twice.

Now aim the remote towards your device and press the Power (or Mute*) key.

If the device turns oﬀ (or mutes*), your remote is ready to use. If not, repeat steps 2-5 with the next code

in the list.

* If you are setting up an Audio Video Receiver or Sound Bar, please try the Mute key during step 5.

HOW TO SET UP YOUR REMOTE

B  SETUP BY CODE

Home

AFTER SIMPLESET OF CODE SETUP

Your One For All remote can operate up to three devices. By default the remote is pre-programmed to

control your Sky Q box, but you can control some functions of your TV and Sound Bar or Audio Video

Receiver

If you set up a TV, the Volume Up, Down, Mute, TV Power and TV Input keys will then control your TV.

If you then also set up an Audio Device such as a Sound Bar or Audio Video Receiver, the remote will then

control the Volume Up, Down and Mute of that device.

Power Macro

If you have set up your remote to control more than one device, such as a TV and/or Audio device you can

turn them all on or oﬀ by simply holding down the Sky Power key for 3 seconds. The remote will ﬁrst send

Power to the Sky Box, and then to TV and Audio (if applicable).

AV Shift

As the AV key is intended to select the input on your TV and most TVs use a menu to select from a list

of inputs, when the AV key is pressed and a TV is set up, the Menu Up, Down, Left, Right and OK keys

temporarily control the TV. If the OK key is pressed, or no key is pressed for ten seconds, these keys will

revert to controlling your Sky Box.

Home

Your One For All remote control can learn any function from any other working remote control. This is a

quick and easy one-time setup that allows you to control any infrared controlled device you have in your

living room. You can even combine multiple devices in one easy to use remote control – for example you

could teach the volume keys to control your Sound Bar, the TV Power and Input keys to control your TV, and

the rest of the keys to control a Set Top Box (Satellite, Cable or Freeview Receiver).

To do this, ﬁrstly make sure you have all your original remote controls to hand, and that they have working

batteries in.

To learn functions, the original remote should be approximately 3cm from the OFA remote, pointing

towards it as shown below:

Hold down 1 and 3 until the red LED blinks twice.

Press and release the key you want to learn a function onto (for example the TV

Power key) – The red LED will blink continuously.

Press and release* the corresponding key on the original remote, for example

Power.

The red LED will blink twice to indicate the key has been learned correctly.

Repeat steps 2 and 3 for each key you want to learn – remember you can learn from multiple remotes,

but only one function per key.

When you have learned all the functions you require, press and hold the OK key

until the red LED blinks twice.

HOW TO SET UP YOUR REMOTE

C  LEARNING

2 - 5 CM

GUIDE

Home

Hints:

• If the red LED shows one long blink at step 4, the function was not learned correctly, please try again

from step 2.

• If you ﬁnd one or more keys don’t work properly after set up, you can re-enter the learning mode at any

time by repeating the procedure from step 1.

• To delete a learned function, hold down 7 ( )and 9 ( ) until the red LED blinks twice, and press the

key to delete twice.

• If one or more of your original remotes aren’t working, you can still set up the One For All remote by

SimpleSet (A) or Code Set Up (B).

* Some remotes send commands diﬀerently. If you ﬁnd a function cannot be learned, try holding down

the key on the original remote instead of pressing and releasing.

Inhaltsverzeichnis

Andere One Forall Universalfernbedienung Handbücher

One Forall

One Forall URC-6231 Bedienungsanleitung

One Forall

One Forall URC-3300 Bedienungsanleitung

One Forall

One Forall URC-7532 Bedienungsanleitung

One Forall

One Forall URC-7940 Bedienungsanleitung

One Forall

One Forall URC-7940 Bedienungsanleitung

One Forall

One Forall ZAPPER URC-6010 Bedienungsanleitung

One Forall

One Forall (URC-8910) Bedienungsanleitung

One Forall

One Forall KAMELEON 5 URC-8305 Bedienungsanleitung

One Forall

One Forall URC-3445 Administratorhandbuch

One Forall

One Forall Home Producer URC 9800 Bedienungsanleitung

One Forall

One Forall OARC05G Bedienungsanleitung

One Forall

One Forall URC-6211 Bedienungsanleitung

One Forall

One Forall BIG EASY URC-2585 Bedienungsanleitung

One Forall

One Forall Zapper URC-6512 Bedienungsanleitung

One Forall

One Forall SMART CONTROL PRO Bedienungsanleitung

One Forall

One Forall URC-7740 Bedienungsanleitung

One Forall

One Forall URC-6532 Bedienungsanleitung

One Forall

One Forall URC-9966 Bedienungsanleitung

One Forall

One Forall URC-7525 Bedienungsanleitung

One Forall

One Forall URC-8350 Bedienungsanleitung

One Forall

One Forall URC-7040 Bedienungsanleitung

One Forall

One Forall URC-1625 Bedienungsanleitung

One Forall

One Forall URC-1625 Bedienungsanleitung

One Forall

One Forall URC-6210 Bedienungsanleitung

Beliebte Universalfernbedienung Handbücher anderer Marken

Pronto

Pronto Peel Bedienungsanleitung

GE 24929 Bedienungsanleitung

Radio Shack

Radio Shack Wireless Remote Control System Bedienungsanleitung

AUVIO

AUVIO Universal Home Theater Remote Bedienungsanleitung

Philips

Philips Icon SRU4106 Bedienungsanleitung

THOMSON

THOMSON ROC4309 Bedienungsanleitung

Philips

Philips pm625S Bedienungsanleitung

GE RM94931 Bedienungsanleitung

RCA

RCA RCU600WMS - Universal Remote Control Bedienungsanleitung

Blackweb

Blackweb BWB17AV002 Bedienungsanleitung

Marmitek

Marmitek DoorGuard 300 Bedienungsanleitung

Chunghop

Chunghop RM-L618 Bedienungsanleitung

GE RM24965 Bedienungsanleitung

Anderic

Anderic KTN828 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Bedienungsanleitung

Medion

Medion E74023 Bedienungsanleitung

intensity

intensity RM02A Bedienungsanleitung

GE RM24950 Bedienungsanleitung