One Identity Safeguard 2000 Bedienungsanleitung

One Identity Safeguard for Privileged

Passwords

Appliance Setup Guide

This guide contains proprietary information protected by copyright. The software described in this guide

is furnished under a software license or nondisclosure agreement. This software may be used or copied

only in accordance with the terms of the applicable agreement. No part of this guide may be reproduced

or transmitted in any form or by any means, electronic or mechanical, including photocopying and

recording for any purpose other than the purchaser’s personal use without the written permission of

One Identity LLC .

The information in this document is provided in connection with One Identity products. No license,

express or implied, by estoppel or otherwise, to any intellectual property right is granted by this

document or in connection with the sale of One Identity LLC products. EXCEPT AS SET FORTH IN THE

TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR THIS PRODUCT,

ONEIDENTITY ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR

STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-

INFRINGEMENT. IN NO EVENT SHALL ONEIDENTITY BE LIABLE FOR ANY DIRECT, INDIRECT,

CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT

LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF

INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF

ONEIDENTITY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. One Identity makes no

representations or warranties with respect to the accuracy or completeness of the contents of this

document and reserves the right to make changes to specifications and product descriptions at any

time without notice. One Identity does not make any commitment to update the information

contained in this document.

If you have any questions regarding your potential use of this material, contact:

One Identity LLC.

Attn: LEGAL Dept

4 Polaris Way

Aliso Viejo, CA 92656

Refer to our Web site (http://www.OneIdentity.com) for regional and international office information.

Patents

One Identity is proud of our advanced technology. Patents and pending patents may apply to this

product. For the most current information about applicable patents for this product, please visit our

website at http://www.OneIdentity.com/legal/patents.aspx.

Trademarks

One Identity and the One Identity logo are trademarks and registered trademarks of One Identity

LLC. in the U.S.A. and other countries. For a complete list of One Identity trademarks, please visit

our website at www.OneIdentity.com/legal. All other trademarks are the property of their

respective owners.

Legend

WARNING: A WARNING icon indicates a potential for property damage, personal

injury, or death.

CAUTION: A CAUTION icon indicates potential damage to hardware or loss of data if

instructions are not followed.

IMPORTANT,NOTE,TIP,MOBILE, or VIDEO: An information icon indicates supporting

information.

Safeguard for Privileged Passwords Appliance Setup Guide

Updated - February 2019

Contents

One Identity Safeguard for Privileged Passwords 2000 Appliance 4

Package contents 4

Front and back panels 5

Operating conditions and regulatory compliance 7

Setting up the appliance 9

Warnings and precautions 15

Standardized warning statements for AC systems 17

About us 20

Contacting us 20

Technical support resources 20

Safeguard for Privileged Passwords Appliance Setup Guide 3

One Identity Safeguard for

Privileged Passwords 2000

Appliance

This chapter provides a list of the main components included in the package and a

description of the main features of the One Identity Safeguard for Privileged Passwords

2000 Appliance. It also describes the operating conditions and regulatory compliance.

Package contents

In addition to this guide, the One Identity Safeguard for Privileged Passwords package

contents include:

1. One Identity Safeguard for Privileged Passwords 2000 Appliance

2. Rail (2)

3. Ethernet cable

4. Extra rail installation brackets

5. Power cord (2)*

6. 6 foot DB9F/DB9F serial cable

* The included power cords are approved by use only in specific countries or regions.

Before using a power cord, verify that it is rated and approved for use in your location. The

power cord is for AC mains installation only.

If any items are missing from your package, contact Support at:

https://support.oneidentity.com

Safeguard for Privileged Passwords Appliance Setup Guide

One Identity Safeguard for Privileged Passwords 2000 Appliance

Front and back panels

The following diagram shows the front and back panels on the One Identity Safeguard for

Privileged Passwords 2000 Appliance.

Safeguard for Privileged Passwords Appliance Setup Guide

One Identity Safeguard for Privileged Passwords 2000 Appliance

Safeguard for Privileged Passwords Appliance Setup Guide

One Identity Safeguard for Privileged Passwords 2000 Appliance

Operating conditions and regulatory

compliance

Operating conditions (運行條件)

Input (輸入/输入):100-140 / 180-240 Vac, 50-60 Hz, 8.5-6.0 / 5.0-3.8 A

Operating Temperature (工作溫度): 5 C to 35 C

Altitude of Operation (m)…: Up to 2000 m (操作高度(m)：最高2000 m)

Regulatory compliance

Electromagnetic Emissions: FCC Class A, EN 55032 Class A, EN 61000-3-2/-3-3, CISPR 32

Class A, VCCI Class A

Electromagnetic Immunity: EN 55024/CISPR 24, (EN 61000-4-2, EN 61000-4-3, EN 61000-

4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11)

Safety: CSA/EN/IEC/UL 60950-1 Compliant, UL or CSA Listed (USA and Canada), CE

Marking (Europe)

FCC warning

This equipment has been tested and found to comply with the regulations for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with this user’s guide, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case the user will be required to

correct the interference at his or her own expense.

CE Mark warning

This is a Class A product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

VCCI warning

This is a Class A product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

Safeguard for Privileged Passwords Appliance Setup Guide

One Identity Safeguard for Privileged Passwords 2000 Appliance

Taiwan BSMI Class A Warning Statement

This is a Class A Information Product, when used in residential environment, it may cause

radio frequency interference, under such circumstances, the user may be requested to take

appropriate countermeasures.

Safeguard for Privileged Passwords Appliance Setup Guide

One Identity Safeguard for Privileged Passwords 2000 Appliance

Setting up the appliance

Follow these steps to set up and configure the One Identity Safeguard for Privileged

Passwords 2000 Appliance.

Step 1: Before you start

1. Ensure that your Safeguard for Privileged Passwords Appliance has the latest

software version installed. To check the version:

a. From the Safeguard for Privileged Passwords Desktop Client, log in with admin

account credentials.

b. Click Settings |Appliance |Appliance Information. The Appliance

Version is displayed.

c. Go to the following product support page for the latest version:

https://support.oneidentity.com/one-identity-safeguard/download-new-

releases

d. If necessary, apply a patch. Wait for maintenance. If you are installing

multiple patches, repeat as needed.

2. Ensure that you install the Microsoft .NET Framework 4.6 (or greater) on your

management host.

Step 2: Prepare for installation

Gather the following items before you start the appliance installation process:

1. Laptop

2. IP address

3. IP subnet mask

4. IP gateway

5. DNS server address

Safeguard for Privileged Passwords Appliance Setup Guide

Setting up the appliance

6. NTP server address

NOTE: If a Safeguard for Privileged Passwords Appliance is going to be used for

both Privileged Passwords and the sessions module, you need this network

interface information for both the appliance and the embedded sessions

module.

7. One Identity Safeguard for Privileged Passwords licenses

NOTE: One Identity Safeguard for Privileged Passwords ships with the following

modules, each requiring a valid license to enable functionality:

lPrivileged passwords

lEmbedded sessions module

NOTE: If you purchased One Identity Safeguard for Privileged Passwords, the

appropriate license files should have been sent to you via email. If you have not

received an email or need it to be resent, visit

https://support.oneidentity.com/contact-us/licensing. If you need to request a trial

key, please send a request to sales@oneidentity.com or call +1-800-306-9329.

Step 3: Rack the appliance

Prior to installing the racks for housing the appliance, see Warnings and precautions

Step 4: Power on the appliance

Prior to powering up the appliance, see Standardized warning statements for AC systems

The One Identity Safeguard for Privileged Passwords 2000 Appliance includes dual power

supplies for redundant AC power and added reliability.

1. Plug the power cords to the power supply sockets on the appliance back and then

connect the cords to AC outlets.

TIP: As a best practice, connect the two power cords to outlets on different

circuits. One Identity recommends using an UPS on all appliances.

2. Press the Green check mark button on the front panel of the appliance for NOmore

than one second to power on the appliance.

CAUTION: Once the Safeguard for Privileged Passwords Appliance is

booted, DONOT press and hold the Green check mark button. Holding

this button for four or more seconds will cold reset the power of the

appliance and may result in damage.

You can use the Red X button to shut down the appliance. Once the Safeguard for

Privileged Passwords Appliance is booted, press and hold the Red X button for four

seconds until it displays POWER OFF.

NOTE: If the Safeguard for Privileged Passwords Appliance is not yet booted, it

may be necessary to press the Red X button for up to 13 seconds.

Safeguard for Privileged Passwords Appliance Setup Guide

Setting up the appliance

Andere Handbücher für Safeguard 2000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere One Identity Firewall Handbücher

One Identity

One Identity Safeguard 2000 Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung