OneVue Smart-Sync B100-R Bedienungsanleitung
Repeater
Install Guide
OneVue Sync Bluetooth
Product models B100-R
Publication date September 10, 2020
Table of Contents
Specications: Sync Bluetooth™ Repeater ............................................................................................ 3
Install and operation overview: Sync Bluetooth Repeater ......................................................................... 4
About Sync Bluetooth Devices ................................................................................................... 4
Add a Clock Mode .................................................................................................................. 4
Post-install operation .............................................................................................................. 5
Install Repeater: add a clock mode ............................................................................................. 5
Install Repeater .............................................................................................................................. 7
Step 1: Verify supplied components ............................................................................................ 7
Step 2: Verify Bridge location and connection ............................................................................... 7
Step 3: Verify mounting location meets guidelines ......................................................................... 7
Step 4: Mount repeater to wall or ceiling ...................................................................................... 7
Technical Support ........................................................................................................................... 9
Support through Primex Certied Sales and Service Partners ........................................................... 9
Primex Technical Support ........................................................................................................ 9
IMPORTANT SAFETY INSTRUCTIONS ............................................................................................... 10
REGULATORY APPROVALS ............................................................................................................. 11
FCC Statement ..................................................................................................................... 11
RADIO STANDARDS SPECIFICATION (RSS) ................................................................................ 11
EUROPEAN UNION DECLARATION OF CONFORMITY AND RESTRICTIONS ....................................... 12
TWO YEAR LIMITED WARRANTY ..................................................................................................... 14
Page 2
Specications: Sync Bluetooth™ Repeater
Enclosure Enclosure: ABS plastic
Dimension: 11.5 cm W x 4 cm H (115 mm x 40 mm)
Weight: 1 lb. (455 g) with 2 D-cell alkaline batteries
Mounting: wall or surface-mount
Power Supply Typical ve (5) year battery life. Battery life is based on operating conditions and may vary
due to installed site conditions.
Requires 2 D-cell alkaline batteries (supplied)
Optional AC power accessory: 5V DC USB Mini B (5 pin) connector interface, 5 ft. (1.5 m)
cable, Input: 100-240 VAC, 50/60 Hz, 0.4A, Output: 5V DC, 1.0A max
Bluetooth®
Wireless
Communication
Protocol
Bluetooth® Low Energy (BLE) Wireless Technology, version 4.1
Bluetooth Range: up to 100 feet (30 meters)
Operation Connects daily to an available Sync Bluetooth mesh network; receives UTC time,
downloads updates, and sends operating status.
LED status indicator When its status button is pressed a visual LED blinking sequence indicates its current
operation status. The status button is located on the front of the device.
• One blink: device is powered on.
• Two blinks: successful connection to a Sync Bluetooth mesh network; received UTC
time.
• Four blinks: low battery level status; battery replacement required.
Environment Operating Temperature Range: 32° to 95° F (0° to 35° C); indoor use only
Storage Temperature Range: -4° to 158° F (-20° to 70° C)
Certications FCC, CE, and IC compliant
Page 3
Install and operation overview: Sync Bluetooth Repeater
Sync Bluetooth repeaters are designed to provide ease of installation, requiring no end user conguration, simply take
out of the box and install. The only operation dependency is its connection to an available Sync Bluetooth mesh
network.
About Sync Bluetooth Devices
• Each device is equipped with a Bluetooth Low Energy (BLE) Wireless Technology radio component that allows it to
establish a wireless connection to a Sync Bluetooth mesh network.
• Each device is identied by a unique Device ID, allowing it to receive its unique settings managed in OneVue, and
authenticate and connect to the mesh network.
• A Bridge is the only system device that connects to an Ethernet or Wi-Fi network. Upon its network connection, it
connects to a NTP Server to receive UTC time and checks-in to OneVue. During each check-in, it sends device data
received from its last connection to the mesh network and downloads any pending setting updates. Pending setting
updates are then transmitted to devices during its next connection to the mesh network.
Add a Clock Mode
Upon rst-power up at its installation location, a clock and repeater enters Add a Clock mode as described below.
1. Once powered on at its installation location, the device continuously searches for an available Sync Bluetooth
mesh network.
It may take up to 15 minutes for a device to authenticate and connect to an available mesh network. We
recommend to continue installing additional devices, while other devices establish their connection to the mesh
network.
2. Once a device has authenticated with the mesh network, it establishes a communication path either to another
Sync Bluetooth device or directly to a Bridge available within the mesh network.
3. Once connected, the device receives the New Clock Time Zone and sets its time. For an analog clock, its hands
perform one full revolution past 12:00 and then sets its time.
• During its rst connection to the mesh network, its unique Device ID is added to the mesh network.
• If a Bridge is in 8-hour deployment mode, within 30 minutes of receiving a new Device ID, the Bridge connects to
your facility's network and sends the new Device ID to OneVue. The new device is added to your OneVue
account.
• If a Bridge is not in 8-hour deployment mode, the new device is added to your OneVue account within 24 hours to
7 days.
4. When the Bridge connects to OneVue, the new device default settings are downloaded to the Bridge.
5. Upon its next connection to the mesh network, the Bridge automatically sends updated device settings received for
each device based on their Device ID.
Page 4
In summary, from the time a clock or repeater device is rst powered on at its install Location and connects to the
mesh network, it receives and sets its time within 15 minutes. If a Bridge is in 8-hour deployment mode, a new device is
added to your OneVue account within 30 minutes, and when not in 8-hour deployment mode it may take up to 24 hours
to 7 days.
Battery-operated clock only: When a clock cannot establish a connection to a mesh network to receive time, its
estimated battery life is reduced to 90 days.
Post-install operation
Once a Bridge has connected to OneVue and the Bluetooth clocks and/or repeaters have authenticated and connected
to a Sync Bluetooth mesh network, the devices operate as described below.
1. Once a day, at a system-dened time, each Bridge connects to your facility’s network to receive UTC time from an
NTP Server and check-in to OneVue to download device setting updates.
2. Once a day, at a system-dened time, each Sync Bluetooth device automatically establishes a wireless
communication path to either another Bluetooth device or directly to a Bridge to build the Sync Bluetooth mesh
network.
•Clock and repeater statuses are forwarded to a Bridge either by its communication path to another clock,
repeater, or directly to a Bridge.
• Clocks and repeaters receive setting updates and synchronize received UTC time to its Time Zone offset and
DST rules.
3. Once the Sync Bluetooth mesh network has completed its daily build, a Bridge connects to your facility's network to
send all received device status data to OneVue.
Install Repeater: add a clock mode
Upon rst-power up at its installation location, a clock and repeater enters Add a Clock mode as described below.
1. Once powered on at its installation location, the device continuously searches for an available Sync Bluetooth
mesh network.
It may take up to 15 minutes for a device to authenticate and connect to an available mesh network. We
recommend to continue installing additional devices, while other devices establish their connection to the mesh
network.
2. Once a device has authenticated with the mesh network, it establishes a communication path either to another
Sync Bluetooth device or directly to a Bridge available within the mesh network.
3. Once connected, the device receives the New Clock Time Zone and sets its time. For an analog clock, its hands
perform one full revolution past 12:00 and then sets its time.
• During its rst connection to the mesh network, its unique Device ID is added to the mesh network.
• If a Bridge is in 8-hour deployment mode, within 30 minutes of receiving a new Device ID, the Bridge connects to
your facility's network and sends the new Device ID to OneVue. The new device is added to your OneVue
account.
• If a Bridge is not in 8-hour deployment mode, the new device is added to your OneVue account within 24 hours to
7 days.
Page 5
4. When the Bridge connects to OneVue, the new device default settings are downloaded to the Bridge.
5. Upon its next connection to the mesh network, the Bridge automatically sends updated device settings received for
each device based on their Device ID.
In summary, from the time a clock or repeater device is rst powered on at its install Location and connects to the
mesh network, it receives and sets its time within 15 minutes. If a Bridge is in 8-hour deployment mode, a new device is
added to your OneVue account within 30 minutes, and when not in 8-hour deployment mode it may take up to 24 hours
to 7 days.
Battery-operated clock only: When a clock cannot establish a connection to a mesh network to receive time, its
estimated battery life is reduced to 90 days.
Page 6
Install Repeater
Follow the instructions below to mount a Sync Bluetooth Repeater.
Step 1: Verify supplied components
Quantity Component
4 Screws, #8 x 1 1/4” at head
4 Anchors
Step 2: Verify Bridge location and connection
Verify the Bridge, designated to support the clock or repeater install area, has established a network connection to
OneVue and an NTP Server. If a Bridge is set to no network mode due to a network is not available, this step is not
required.
Step 3: Verify mounting location meets guidelines
Where the repeater is mounted impacts its use and operation. The guidelines below should be taken into consideration
to ensure the installation location provides optimal performance.
If a Site Survey was completed, install devices at each designated location. Start by installing devices that are located
closest to the Bridge and then work outward. A device should always be rst powered on at its designated install
location.
• 100 ft. (30 m) when in clear-line-of sight to another Sync Bluetooth device
• 50 ft. (15.2 m) when there is 1 internal wall between Sync Bluetooth devices
• 30 ft. (9.1 m) when there are 2 internal walls between Sync Bluetooth devices
Step 4: Mount repeater to wall or ceiling
The repeater's mounting base has four key-shaped screw holes and two standard screw holes for a wall or ceiling
mount.
1. Separate the unit from its mounting base: From the side of the unit, insert the top of a standard screwdriver into an
insert opening and gently push up to remove the cover.
2. Remove the pull-off tab (12-character Device ID) and afx to a oorplan to identify its installation location.
3. Use the mounting base to mark the hole locations on the ceiling or wall.
4. Drill holes where marked and tap plastic screw anchors provided into the drilled holes.
5. For mounting with the key-shaped screw holes, drive the supplied screws partially into the ceiling or wall and line
up the mounting base. Place and twist the mounting base into position under the screws, tighten screws to secure
base to the mounting surface.
Page 7
6. For mounting with the two standard screw holes, align base to holes and drive the supplied screws into the ceiling
or wall, tighten screws to secure base to the mounting surface.
7. Insert 2 D-cell batteries into the battery compartment.
8. Insert its cover onto the mounting base.
9. Apply AC power (optional accessory). AC power adapter 5V DC USB Mini B (5 pin) connector interface, 5ft (1.5 m)
cable, Input: 100-240 VAC, 50/60 Hz, 0.4A, Output: 5V, 1.0A max
10. Located on its cover, press and release the Status button. The LED blink sequence indicates its current status.
• One blink: device is powered on.
• Two blinks: successful connection to a Sync Bluetooth mesh network; received UTC time.
• Four blinks: low battery level status; battery replacement required.
11. Once the device has been added to OneVue, update its Name from its 12-character Device to its named install
location.
Page 8
Technical Support
You may require Technical Support when you have questions about product features, system conguration, or
troubleshooting. Support services are delivered in accordance with your organization's support agreement, end-user
license agreements, and warranties, either with a Primex Certied Sales and Service Partner or directly with Primex.
Support through Primex Certied Sales and Service Partners
Ensuring our customers experience excellent service is of utmost importance to Primex. Our network of Certied Sales
and Service Partners offers technical support services for Primex products.
If you have purchased Primex products or have a service agreement with a Primex Partner, they are your primary
contact for all Technical Support inquires.
Primex Technical Support
Make sure you have satised the system requirements that are listed in your product documentation. Also, you should
be at the computer or device on which the problem occurred, in case it's necessary to replicate the problem.
When you contact Primex Technical Support, please have the following information available:
• Customer ID/Account Name
• Problem description/error messages
• Device hardware information
• Troubleshooting performed before contacting Primex
• Recent network changes
Primex Technical Support
Monday through Friday from 8:00 AM to 5:00 PM CT
Phone: 1-262-729-4860
Email: [email protected]
Page 9
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE INSTALLATION, OPERATION, OR MAINTENANCE OF PRODUCT.
Some of the following information may not apply to your particular product model; however, as with any electronic
product, precautions should be observed during installation, operation, and maintenance.
• Installation must conform to state or local building codes and ordinances.
• Installation or maintenance should be performed only by qualied personnel as dened in the Local Electrical Code.
Mount in location where device will not readily be subject to tampering.
• Any wiring instructions must be followed precisely. Failure to do so could cause permanent equipment damage.
• To avoid possible electric shock or damage to the device, disconnect power source before installation or servicing.
• Do not install or use device near water. To reduce the risk of electrical shock, do not expose device to rain or
moisture. Device must not be exposed to dripping or splashing and no objects lled with liquids, such as vases, must
be placed on the device.
• Device is designed for indoor use only. Operating outdoors, or in wet areas, is an electrical hazard and may damage
the equipment while nullifying the warranty.
• Device is cleanable with a cloth moistened with water or a common disinfectant. Be sure to test any cleaning
solutions on a small area of the clock before using it on the entire device. Do not use caustic cleaners or abrasives.
• Keep away from dust, dirt and moisture.
• For healthcare facilities, devices are not intended for patient use and must not be installed within 6 feet (2 m) of
patient contact.
AC power Models
• AC main power supply must be disconnected while installing or performing maintenance of any device. To
completely disconnect the power input, the main plug should be disconnected from the main socket outlet
completely.
• The main socket outlet must provide a protective earthing connection where the outlet has a protective earth
(ground) connection.
• Main plug is used as disconnect device and it should remain readily operable during intended use.
• If power cable is connected directly to junction box without an outlet, AC power must be supplied from a circuit that
has a resettable circuit breaker. AC mains power supply must be disconnected while installing or performing
maintenance of any device. Open the circuit breaker supplying the device before attempting installation,
maintenance, or repairs.
Page 10
Andere Handbücher für Smart-Sync B100-R
1
Inhaltsverzeichnis
Andere OneVue Repeater Handbücher
