Onkyo TX-SR3100 Bedienungsanleitung

Instruction Manual

TX-SR3100

TX-SR3100DAB

AV RECEIVER

Contents

Reducing the Power Consumption in Standby

State

When the following functions are enabled, the power consumption in

standby state increases. To reduce the power consumption in standby state,

check each setting and set the functions to "O󰀨".

– HDMI CEC ( →p68)

– HDMI Standby Through ( →p68)

– USB Power Out at Standby ( →p71)

Table of contents

Detailed contents (Next page)

Firmware Update

Speaker InstallationSpeaker Installation

Speaker ConnectionsSpeaker Connections

Troubleshooting

Supplementary Information

Features, etc. released in rmware updates

Before starting the procedure 5

Firmware Update 6

Update Information of the rmware 6

Checking the Firmware Version of the Unit 6

Firmware Update Procedure 6

Part Names 8

Front Panel 8

Display 10

Rear Panel 11

Remote Controller 13

Inputting Characters 15

Speaker Installation

Setting Up the Speakers 16

Speaker Connections

Speakers you can use with this unit and cable

connections 20

Connecting the Subwoofer 21

Connections

Notes regarding connections with HDMI cables 26

Connections 26

Connecting the TV 27

To ARC/eARC TV 27

To Non-ARC TV 27

Connecting Playback Devices 29

Connections to BD/DVD and GAME with HDMI jacks 29

Connecting an Audio Component 30

Connecting an Integrated Amplier or Transmitter

(ZONE B) 31

Connecting Antennas 32

Connecting the Power Cord 33

Playback

Basic Operations 35

Turning the power on 35

Selecting a source to play 35

Adjusting the volume 36

Using the linking function (HDMI CEC) 36

Switching the display 37

Listening Mode 38

Selecting a Listening mode 38

BLUETOOTH®Playback 39

Listening To the Radio 40

Listening To the AM/FM Radio

(AM : North American, Taiwanese, Middle East,

Australian and Asian models) 40

Using RDS

(European, Middle East, Australian and Asian

models) 42

Listening To DAB Digital Radio

(European models only) 43

Presetting a Radio Station 44

Adjusting the tone 45

Quick Menu 46

ZONE B Playback 48

Connections 48

Playing Back 49

Playing di󰀨erent audio and video 50

Displaying Your Favorite Video on TV While Playing

Music 50

Setup

Setup Menu 53

Menu list 53

1. Input/Output Assign 55

2. Speaker 59

3. Audio Adjust 63

4. Source 65

5. Hardware 68

6. Miscellaneous 72

Initial Setup with Auto Start-up Wizard 74

Operations 74

1. Speaker Setup 75

2. ARC Setup 75

3. AccuEQ Room Calibration 76

Troubleshooting

Before starting the procedure 78

When the unit is operating erratically 79

Troubleshooting 80

Appendix

Speaker Layouts and Selectable Listening Modes 89

LISTENING MODE buttons and Selectable Listening

Modes 91

Input Formats and Selectable Listening Modes 92

Listening Mode E󰀨ects 95

Speaker Combinations 99

General Specications 100

Before starting the procedure

What's in the box

A Main unit (1)

B Remote controller (RC-970R) (1), Batteries (AAA/R03) (2)

C Speaker setup microphone (1)

• Used during Initial Setup.

D Indoor FM antenna (North American, Taiwanese, Middle East, Australian and

Asian model) (1)

E AM loop antenna (North American, Taiwanese, Middle East, Australian and

Asian model) (1)

F DAB/FM antenna (European models) (1)

• Initial Setup Guide (1)

* This is an online user manual. This is not supplied with the product.

Note

• Connect speakers with an impedance of 4 Ω to 16 Ω.

• The power cord must be connected only after all other connections are

completed.

• We will not accept any responsibility for damage arising from the connection

with equipment manufactured by other companies.

• Details on the rmware update will be posted on our website and through

other means at a later date.

• The illustrations in this manual use those of North American models unless

otherwise mentioned.

• Specications and appearance are subject to change without prior notice.

Firmware Update

Disclaimer: The program and accompanying online documentation are

furnished to you for use at your own risk.

Our company will not be liable and you will have no remedy for damages for

any claim of any kind whatsoever concerning your use of the program or the

accompanying online documentation, regardless of legal theory, and whether

arising in tort or contract.

In no event will our company be liable to you or any third party for any special,

indirect, incidental, or consequential damages of any kind, including, but not

limited to, compensation, reimbursement or damages on account of the loss of

present or prospective prots, loss of data, or for any other reason whatsoever.

Update Information of the rmware

For the latest rmware contents and the rmware version, visit website.

Checking the Firmware Version of the Unit

To conrm the rmware version of your product, press the SETUP button

on the remote controller, and refer to "Miscellaneous" - "Firmware Update" -

"Version" ( →p73).

Firmware Update Procedure

Updating can take about 20 minutes. Existing settings are maintained.

Updating via USB

• Save only the updating data on the USB storage device. Delete any other

data.

• While updating the rmware, do not do the following:

– Disconnecting and reconnecting cables, USB storage device, speaker

setup microphone or headphones, or performing operations on the unit

such as turning the power o󰀨

• Prepare a 1 GB or larger USB storage device. The format of USB storage

devices supports FAT16 or FAT32 le system format.

– Media inserted into a USB card reader may not be used for this function.

– USB storage devices equipped with the security function are not

supported.

– USB hubs and USB devices equipped with the hub function are not

supported. Do not connect these devices to the unit.

• If "HDMI CEC" is set to "On", set it to "O󰀨".

– Press SETUP. Next, select "Hardware" - "HDMI" and press ENTER,

then select "HDMI CEC" and select "O󰀨".

* Depending on the USB storage device or its content, long time may be required

for loading, the content may not be loaded correctly, or power may not be supplied

correctly.

* Our company will not be liable whatsoever for any loss or damage of data, or

storage failure arising from the use of the USB storage device. Please note this in

advance.

* The descriptions may di󰀨er from the actual on-screen displays, however, operations

and functions are the same.

Update

1. Connect the USB storage device to your PC.

2. Download the rmware le from the our company's website to your PC and

unzip.

Firmware les are named as below.

ONKAVR_R.zip

Unzip the le on your PC. The number of unzipped les and folders varies

depending on the model.

3. Copy all unzipped les and folders to the root folder of the USB storage

device.

• Make sure to copy the unzipped les.

4. Connect the USB storage device to the USB port of this unit.

• If an AC adapter is supplied with the USB storage device, connect the AC

adapter, and use it with a household outlet.

• If the USB storage device has been partitioned, each section will be

treated as an independent device.

5. Turn on the power of the unit and wait for about 20 seconds.

6. Press the SETUP button on the remote controller, select "Miscellaneous" -

"Firmware Update" - "Update via USB" in order and press ENTER.

• If "Firmware Update" is not available for selection, wait until the system has

started.

• "Update via USB" will not be available for selection if the rmware of the

unit is the latest.

7. Press ENTER with "Update" selected, and start update.

"Completed!" is displayed when updating is completed.

• Check the progress on the display of the unit.

• During the update, do not turn the power o󰀨, or disconnect or reconnect

the USB storage device.

8. Disconnect the USB storage device from the unit.

9. Press ON/STANDBY on the main unit to turn the unit into standby mode.

The process is completed, and your rmware is updated to the latest version.

• Do not use ON/STANDBY on the remote controller.

If an Error Message is Displayed

If an error occurs, "- Error!" is displayed on the display of the unit. (""

represents an alphanumeric character.) Refer to the following descriptions and

check.

Error Code

• -01, -10:

The USB storage device cannot be recognized. Check if the USB storage

device or USB cable is securely inserted to the USB port of the unit.

Connect the USB storage device to an external power source if it has its own

power supply.

• -05, -13, -20, -21:

The rmware le is not present in the root folder of the USB storage device,

or the rmware le is for another model. Retry from the download of the

rmware le.

• Others:

After removing the power plug once, insert it to the outlet, and then start the

operation from the beginning.

Part Names

Front Panel

A ON/STANDBY button

B MUSIC OPTIMIZER button: Turns on/o󰀨 the

Music Optimizer function that improves the

quality of the compressed audio.

C PHONES jack: Connect headphones with a

standard plug (ø1/4″/6.3 mm).

D LISTENING MODE button: Switches the

listening mode ( →p38) by pressing

"STEREO", "MOVIE/TV" and "MUSIC"

repeatedly.

E Input selector buttons: Switches the input to be

played.

F TONE CONTROL button:You can adjust the

sound quality. Press / LEFT/RIGHT for the

“TREBLE”/”VOCAL”/”BASS” item you want to

adjust. ( →p45)

G SETUP MIC jack: Connect the supplied speaker

setup microphone. ( →p76)

H MASTER VOLUME

Front Panel

I BLUETOOTH indicator: Lights up when this

unit and a BLUETOOTH-enabled device are

connected.

J DOLBY ATMOS indicator: Lights up when

Dolby Atmos signals are reproduced in

appropriate listening mode.

K Remote control sensor: Receives signals from

the remote controller.

• The reception range of the remote controller

is within a distance of approx. 16´/5 m, and

an angle of 20° in vertical direction and 30° to

right and left.

L ZONE A/B button: Selects an audio output

destination from among "ZONE A", "ZONE B"

and "ZONE A+B". ( →p49)

M INFO button:Switches the information on the

display and is used to operate RDS (European,

Middle East, Australian and Asian models)

( →p42)

N DIMMER button:Switches the brightness of the

display with three levels. It cannot be turned o󰀨

completely.

O Display ( →p10)

P SETUP button: You can display advanced

setting items on the TV and the display to have

a more enjoyable experience with this unit.

( →p53)

Q Cursor / / / UP/DOWN/LEFT/RIGHT

buttons and ENTER button: Select an item with

the cursors, and press ENTER to conrm your

selection. When using TUNER, use them to tune

in to stations. ( →p40)

R RETURN button: Returns the display to the

previous state while setting.

Display

D E F G

A Displays various information of the input signals.

B Speaker/Channel display: Displays the output

channel that corresponds to the selected

listening mode.

C Displays the audio output destination.

A: Audio is output only to ZONE A.

B: Audio is output only to ZONE B.

AB: Audio is output to both ZONE A and ZONE

D Lights in the following conditions.

: Headphones are connected.

: Connected by BLUETOOTH.

HDMI: HDMI signals are input and the HDMI

input is selected.

DIGITAL: Digital signals are input and the digital

input is selected.

E Lights according to the type of input digital audio

signal and the listening mode.

F Lights in the following conditions.

RDS (European, Middle East, Australian and

Asian models): Receiving RDS broadcasting.

TUNED: Receiving DAB (European models)/

AM (North American, Taiwanese, Middle East,

Australian and Asian models)/FM radio.

FM ST: Receiving FM stereo.

SLEEP: Sleep timer is set.

AUTO STBY: Auto Standby is set. ( →p71)

G Blinks when muting is on.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Onkyo Stereo-Receiver Handbücher

Onkyo

Onkyo TX-NR727 Einrichtungshandbuch

Onkyo

Onkyo TX-NR6100 Handbuch

Onkyo

Onkyo TX-8050 Bedienungsanleitung

Onkyo

Onkyo DV-BD606 - Blu-ray Single Disc Player Bedienungsanleitung

Onkyo

Onkyo TX-RZ820 Bedienungsanleitung

Onkyo

Onkyo TX-SR876 - AV Receiver Technisches Datenblatt

Onkyo

Onkyo TX-RZ820 Installationsanleitung

Onkyo

Onkyo TX-NR901 Bedienungsanleitung

Onkyo

Onkyo TX-SR875 Bedienungsanleitung

Onkyo

Onkyo HT-R380 Bedienungsanleitung

Onkyo

Onkyo 889951000747 Installationsanleitung

Onkyo

Onkyo TX-8020 Bedienungsanleitung

Onkyo

Onkyo TX-8020 Bedienungsanleitung

Onkyo

Onkyo TX-SR875 Bedienungsanleitung

Onkyo

Onkyo TX-8260 Bedienungsanleitung

Onkyo

Onkyo TX-8255 Bedienungsanleitung

Onkyo

Onkyo TX-SR804 Bedienungsanleitung

Onkyo

Onkyo TX-8050 Bedienungsanleitung

Onkyo

Onkyo TX-8522 Bedienungsanleitung

Onkyo

Onkyo K-185X Bedienungsanleitung

Onkyo

Onkyo TX-NR801 - AV Receiver Bedienungsanleitung

Onkyo

Onkyo TX-NR595 Handbuch

Onkyo

Onkyo HT-R940 Bedienungsanleitung

Onkyo

Onkyo TX-4500 Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Pioneer

Pioneer AVH-Z7250BT Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Pioneer

Pioneer SC-LX904 Handbuch

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Pioneer

Pioneer SX-1000TA Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Pioneer

Pioneer SX-838 Bedienungsanleitung