Ooznest WorkBee CNC Bedienungsanleitung

WorkBee CNC

Full Kit Assembly Instructions

WorkBee CNC 1

Table of Contents

1.0 Getting Started 3

1.1 About The Kit 4

1.2 Check Product Contents 4

1.3 Tools Required 4

1.4 Notes on Assembly 4

2.0 Drag Chains Assembly 6

2.1 Y-Axis 7

2.1.1 Y-Axis Fixed End Assembly ........................................................... 7

2.1.2 Y-Axis Fixed End Mounting............................................................ 8

2.1.3 Y-Axis Moving End Assembly......................................................... 9

2.1.4 Y-Axis Moving End Mounting ....................................................... 10

2.1.5 Y-Drag-Chain............................................................................ 11

2.2 X-Axis 12

2.2.1 X-Axis Fixed End Mounting ......................................................... 12

2.2.2 X-Axis Moving End Assembly ...................................................... 13

2.2.3 X-Axis Moving End Mounting....................................................... 14

2.2.4 X-Drag-Chain ........................................................................... 15

3.0 Power Supply Assembly 16

3.1 Output 17

3.1.1 Securing XT60-Male Outputs ...................................................... 17

3.1.2 Inserting LED-Volt-Meter............................................................ 18

3.2 Input 19

3.2.1 IEC-Inlet Wires ......................................................................... 19

3.2.2 Attaching IEC-Inlet.................................................................... 20

3.3 Connecting PSU-Cover 21

3.3.1 Connecting Wires ...................................................................... 21

3.3.2 Attaching PSU-Cover ................................................................. 23

3.3.3 Testing .................................................................................... 24

4.0 Limit Switches & Wire Routing 25

4.1 Limit Switches 26

4.1.2 Z-Axis Limit Switch.................................................................... 28

4.2 Wire Routing 29

4.2.2 Screw Driven - Gantry Wire Routing ............................................ 30

4.2.3 Belt Driven - Gantry Wire Routing ............................................... 31

4.2.4 Screw Driven - Y-Axis Wire Routing - Part 1 .................................. 32

4.2.5 Screw Driven - Y-Axis Wire Routing - Part 2 .................................. 33

4.2.6 Belt Driven - Y-Axis Wire Routing ................................................ 34

5.0 CNC xPro Assembly 35

5.0.1 Terminal-Block Attachment......................................................... 36

5.0.2 Fan Mount Assembly.................................................................. 37

5.0.3 Attaching The CNC-xPro ............................................................. 38

5.0.4 Fans Wiring .............................................................................. 39

5.0.5 Mounting the CNC-xPro Assembly................................................ 40

6.0 Wiring & Commissioning 42

6.1 CNC-xPro Wiring 43

6.2 Software & Machine Settings 44

6.2.1 Installing Universal G-Code Sender (UGS) .................................... 44

6.2.2 Configuring The Firmware .......................................................... 45

WorkBee CNC 2

6.3 Testing 46

6.4 Wire Tidying 48

6.5 Complete 49

7.0 Appendix 51

7.1 Appendix A - Kit Contents 52

8.0 Appendix B 59

8.1 Recommended GRBL Settings 60

8.2 Invert Mask Table 63

9.0 Appendix C 64

9.1 Common Trouble Shooting Questions 65

WorkBee CNC Getting Started 3

1.0 Getting

Started

WorkBee CNC Getting Started 4

1.1 About The Kit

This manual is for the full kit version of the WorkBee CNC Machine. Ideally, this manual

should be started straight after completing the mechanical assembly. This manual will turn

the mechanical portion of the WorkBee into a working moving machine.

Our WorkBee CNC Machine has a very large community of users, who can mostly be found

at http://openbuilds.com. It is free to sign up to this community and it will allow you to

share your builds, interact with other members, and download useful community created

resources. We have a specific build thread for the WorkBee, and we would love to see your

machines and what you make with them: https://openbuilds.com/builds/workbee-cnc-

machine.5626/.

1.2 Check Product Contents

When you receive your kit, the first thing you should do is check the contents against the

list in Appendix A. The majority of the parts will be separated into boxes that correspond

to the subsections in this manual. Additional spare small parts will be included. If anything

is missing or damaged (or if you have any other problems) please contact us at

[email protected] and we will aim to resolve the issue as quickly as possible.

1.3 Tools Required

•The list below shows the main tools that will be required to complete this build:

•2.5mm Allen Key

•3.0mm Allen Key

•4.0mm Allen Key

•5.5mm Spanner

•7.0mm Spanner

•8.0mm Spanner

•Hammer

•Selection of Philips Screwdrivers

•Selection of Flathead Screwdrivers

•Tweezers

•Wire Cutters/Strippers

1.4 Notes on Assembly

This manual has been written for the construction of a 750 x 750mm screw driven version

of the WorkBee. If you have a different version everything is exactly the same, with the

exception of longer V-Slot extrusions and wire routing.

The assembly has been split into 5 sections: Drag Chains Assembly, Power Supply

Assembly, Limit Switches & Wire Routing, CNC xPro Assembly, Wiring & Commissioning.

To make locating parts quicker, leave the parts in the boxes they came in when carrying

out the build.

WorkBee CNC Getting Started 5

It is recommended that you read through the whole manual before beginning the build in

order to get a full picture of the assembly process. Before beginning each step, make

sure you have studied the diagram and have the required parts in front of you. A PDF

version of the manual is available on our website and this will allow you to zoom in on the

diagrams if needed.

Be very careful to not over tighten the nuts and bolts on the plastic parts, otherwise they

may crack. Everything should easily fit together, and so if it isn’t, take a step back and

re-read the instructions.

Assembly of this kit involves the use of electricity and therefore you should take appro-

priate precautions to ensure you are assembling the kit in a safe manner. When following

wiring diagrams, double check that everything is connected correctly. Before carrying out

any work on the electrics make sure that the machine is switched off.

The polarity is indicated by the color of the wire, not by the color of the connectors at each

end. For the AC IEC input, the live wire is brown, neutral blue, and earth is green and yel-

low. For the DC Wiring of the machine a positive wire is red, negative is black, and earth

is green and yellow.

WorkBee CNC Drag Chains Assembly 6

2.0 Drag

Chains

Assembly

WorkBee CNC Drag Chains Assembly 7

2.1 Y-Axis

2.1.1 Y-Axis Fixed End Assembly

A. Attach a Drag-Chain-Fixed-End to the Y-Drag-Chain-Fixed-End-Mount in the orienta-

tion shown above, using 3 x M5-Low-Profile-15mm bolts and 3 x M5-Nyloc-Nut’s.

WorkBee CNC Drag Chains Assembly 8

2.1.2 Y-Axis Fixed End Mounting

A. Position the Y-Axis-Fixed-End-Assembly to the back left corner of the WorkBee. It

should be flush with the end of the C-Beam-750mm. Secure it using 2 x M5-Low-Pro-

file-25mm bolts and 2 x M5-Drop-In-Tee-Nuts.

Andere Handbücher für WorkBee CNC

Inhaltsverzeichnis

Andere ooznest Elektrowerkzeuge Handbücher

ooznest

ooznest C-Beam Machine Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch

ooznest WorkBee CNC Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken