Ops-Core AMP Bedienungsanleitung
AMP™
(Adaptive Mission Platform)
Communication Headset
CONNECTORIZED VERSION
Operator’s Manual
OM101153-00
This product is covered by one or more patents.
For more information visit www.gentexcorp.com/patents
Introduction
Product Highlights / Key Features
Product Overview
Preparing the AMP Communication Headset for Use
Installing/Replacing Batteries
Moving Microphone to Opposite Earcup
3D Hear-Through (3DHT) Mode
Near Field Magnetic Induction (NFMI) Earplugs
Helmet Rail Mounted Operation
Hook and Loop Fastener Installation
Headband Removal
Rail Arm Installation
Helmet Attachment
Stowed Position
Helmet Donning / Dofng
Detaching Rail Arms
Removing Earcups from Rail Arms
Attaching Earcups to Headband
Attaching Headset Downlead
Maintenance
Storage
Troubleshooting
Customer Service
Specications
Operator Notes
3
4
6
8
8
9
12
14
16
17
18
20
22
24
26
28
30
32
34
36
37
38
39
40
42
TABLE OF CONTENTS
2
3
INTRODUCTION
About the Ops-Core AMP (Adaptive Mission
Platform) Communication Headset
The advanced hear-through and hearing protection capabilities in the Ops-Core
AMP Communication Headset enhance situational awareness and user safety. For
optimal exibility and performance, the modular headset can be easily congured
to meet a wide range of mission needs with options for headband or helmet
mounted use, single or double hearing protection (NFMI models only), and single
or multi-channel communications.
4
PRODUCT HIGHLIGHTS / KEY FEATURES
•World Class Audio Quality
Leveraging industry leading capabilities of the military, industrial safety hearing
protection, and communication systems of parent company Gentex Corporation, the
Ops-Core AMP Communication Headset provides unprecedented audio quality with
ability to operate in combat environments.
•3D Hear-Through (3DHT)
Restores and enhances “natural hearing” of outside environment for improved
situational awareness. Ear-simulator design reproduces ambient sounds with a high
degree of directional accuracy, while also providing robust hearing protection.
•Optional NFMI (Near Field Magnetic Induction) Earplugs (sold separately)
Provide increased noise reduction, while maintaining clear communications and 3D
Hear-Through. NFMI Earplugs do not require wires or batteries. NOTE: Compatible
with NFMI headsets only.
•Mission Congurable Capability
Dual conguration capability adapts headset to either headband or helmet mounted
preference based on operational requirements.
• Ergonomic Headband
Engineered for optimal comfort and streamlined prole, capable
of being worn under a helmet. Quick attach/detach from headband capability.
• Rail Mount Kit (sold separately)
Optional rail arms can be mounted to rear of ARC rails, leaving top portion
of rails free for other accessories, while increasing helmet stabilization and
a counterbalancing effect of shroud mounted devices. Single point gimbal
attachment to earcups allows for 360˚ adjustment, providing a better earseal and
accommodation of head movement. Rotate earcups to side or rear of helmet to
create low prole, streamlined stowage when not in use.
5
•Quick-Release Downlead Connections
Disconnect headset from downlead(s) to allow for set up on left, right or both sides.
System can quickly congure between single, dual, or no downlead.
•Noise Canceling Microphone
Mitigates background noise enabling clear communication. Can be mounted to left or
right earcup or removed as preferred.
•Integrated Microphone Mounting & Connection Point
Enables easy integration with any U-173/U standard plug.
•Earseals
Ergonomically designed to t head geometry, providing better seal and increased
noise attenuation.
•Auto Shut-Down
To preserve battery life, alert tones signal 3DHT shut down after two hours of
inactivity. Pressing volume button resets timer. Included AAA lithium batteries provide
115 hours of 3DHT use.
•Fail-Safe Communications
In the event of battery loss, 3DHT will power off leaving headset and earplugs to
operate for standard communication.
6
PRODUCT OVERVIEW
NFMI Button (NFMI models only)
External Battery Cap
Hear-Through Microphone
Boom Mic Assembly
Volume Buttons
Downlead Connector
Ear-to-Ear Cable
LEFT EARCUP
7
External Battery Cap
Hear-Through
Microphone
Downlead Connector
Ear-to-Ear Cable
Mic Port Plug
RIGHT EARCUP
8
PREPARING THE HEADSET FOR USE
Installing/Replacing Batteries:
1. Unscrew battery tube cap
2. Insert the battery into the battery tube with positive (+) end facing outwards
3. Reinstall battery tube cap and ensure that it is tight
4. Repeat steps on other earcup.
NOTE: For optimal performance, always use lithium batteries and
always replace as a set in both earcups. Remove batteries when
headset is not in use for longer durations.
Inhaltsverzeichnis
Andere Ops-Core Headset Handbücher
