Getting started with ViraWarn
2 | P a g e
Safety Precautions
The following points should be followed:
1. ViraWarn Plus 100 must only be used for the purposes described in this manual.
2. ViraWarn Plus 100 is intended for indoor use only.
3. ViraWarn Plus 100 should not be used or stored in direct or reflected sunlight.
4. ViraWarn Plus 100 should be operated and stored at temperatures between 50°F - 90°F (10°C -
32°C).
5. Store your ViraWarn Plus 100 unit in a clean and dry area.
6. Do not submerge ViraWarn Plus 100 in water.
7. Do not drop your ViraWarn Plus 100 unit.
8. Follow the instructions given in the manual to replace the refill bottles.
9. Do not disassemble ViraWarn Plus 100 unit.
10. Do not tilt ViraWarn Plus 100 unit after adding media in the detector chamber.
11. If you experience problems with your ViraWarn Plus 100 unit, contact Opteev support.
!IMPORTANT: The manufacturer reserves the right to alter the specifications of this product without
prior notice
Unpacking the Box
Your ViraWarn box should include:
•ViraWarn Plus 100 unit (Figure 1)
•One power cable
•One refillable detector chamber (Figure 2)
•Six refill bottles (Figure 3)
•ViraWarn Plus 100 Quick-Start Guide
