Optex OVS-6000 Bedienungsanleitung

Select a sensor mounting location based on application (Notication or Dwell Time)

OPTEX OVS-6000 Quick Setup Guide

For detailed information, please refer to the installation manual supplied with each sensor.

Note: Mount to the side if you don’t have vehicle clearance of the sensor (see above right); ensure vehicles will not strike the sensor.

The OVS-6000 utilizes an active infrared transmitter and photoelectric

receiver located in the rectangular sensor head. This Quick Setup Guide

will answer the most common installation questions, including: Mounting

location, aiming the sensor head to achieve proper detection, self-learning,

and programming.

After choosing the mounting location, open the box and remove

the sensor.

View the Transmitter, Receiver and Dipswitches. See below for detail of

dipswitch settings.

Notication (detecting the approach of a vehicle) applications, vehicle clearance validation

Dwell Time (detecting the presence of a stopped vehicle) applications, vehicle clearance validation

sensor 3-4’ sensor 3- 4’

sensor 3 - 4’ sensor 3 - 4’

Note that the dipswitches are located behind the black cover, which

can be easily removed by pulling the cover forward.

(over)

* Aim detector beams in front of tube machine

Note: Mount to the side if you don’t have vehicle clearance of the sensor (see above right); ensure vehicles will not strike the sensor.

18730 Wilmington Ave, Unit 100

Rancho Dominguez, CA 90220

Ph 310 214-8644

Fax 310 898-1098

Toll free 800 877-6656

www.optex-america.com

OPTEX Technologies Inc.

(East Coast Ofce)

8510 McAlpine Park Dr.

Suite 108

Charlotte, NC 28211

Choose Sensor Settings

Test and Complete Installation

3 and 4 - Frequency

Set 3 and 4 Down (unless using 2 or more detectors with overlapping detec-

tion patterns next to each other; then, adjust to different frequencies).

8 - Delay

8 Down (shown), Notication (Vehicle Approaching): no delay.

8 Up requires 2 or more beams broken within a 3-second period for Dwell

time (Vehicle Stationary).

7 - LED Indicator

7 Down (shown), LED on, turns off with detection.

7 Up, LED stays on with power.

1 and 2 - Presence (Vehicle) Detection Timer

Notication (Vehicle Approaching): 1 and 2 Down (shown).

Dwell Time (Vehicle Stationary): 1 Up, 2 Down

5 and 6 - Adjust Detection Height Area

9 to 15 feet: 5 Up, 6 Down (shown).

12 to 24 feet: 5 Down, 6 Up.

Mount Sensor and Adjust the Detection Pattern

* Apply power - no vehicles in the detection pattern for a 10-second learning time.

When mounted on the ceiling, the sensor head is aimed in this direction.

Loosen keeper nut and adjust sensor head so that it aims at the ground

above the driver’s side of the vehicle.

The sensor projects narrow detection beams towards the ground.

The detection area contains 4 beams, as displayed in image at

right. The IR Locator (optional) will give you the ability to locate the

individual beams. When the LEDs light up on the IR Locator, you

are within the beam area. The IR Locator Adjustment Tool can be

purchased from OPTEX. Call 800-877-6656 to learn more.

IR Locator (optional)

Inhaltsverzeichnis

Andere Optex Sicherheitssensor Handbücher

Optex

Optex AX-70TN Bedienungsanleitung

Optex

Optex OVS-50TNR Bedienungsanleitung

Optex

Optex DX-40 Bedienungsanleitung

Optex

Optex HX-80N Bedienungsanleitung

Optex

Optex OVS-50TNR Bedienungsanleitung

Optex

Optex PROWAVE AIR-SLIDE 2 Bedienungsanleitung

Optex

Optex VX Infinity Series Bedienungsanleitung

Optex

Optex FLX-S-ST Bedienungsanleitung

Optex

Optex CX-502 Bedienungsanleitung

Optex

Optex VX Shield series Bedienungsanleitung

Optex

Optex OA-PRESENCE TN Bedienungsanleitung

Optex

Optex CX-702 MKII Bedienungsanleitung

Optex

Optex X-ZONE Bedienungsanleitung

Optex

Optex FTN-RRHW Bedienungsanleitung

Optex

Optex AX-70TN Bedienungsanleitung

Optex

Optex CX-702 MKII Bedienungsanleitung

Optex

Optex AP-360BR Bedienungsanleitung

Optex

Optex REDSCAN mini-Pro Series Bedienungsanleitung

Optex

Optex HX-40 Bedienungsanleitung

Optex

Optex FMX-ST Bedienungsanleitung

Optex

Optex BX SHIELD Series Bedienungsanleitung

Optex

Optex inSight INS-HX-80N Bedienungsanleitung

Optex

Optex X-ZONE Bedienungsanleitung

Optex

Optex VX SHIELD Series Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung