OPTI-UPS Power Series Bedienungsanleitung

User Guide

Power Series

Models PS1000B, PS1500B, PS2200B, PS3000B

PS1000B-RM, PS1500B-RM, PS2200B-RM,

PS3000B-RM

and OPTI-SAFE Xtreme are trademarks of OPTI-UPS Corporation

For your records

The serial number of your UPS is on the rear panel. You should note the

serial number in the space provided below. Retain this booklet as a

permanent record of your purchase to aid in identification in the event of

theft or loss.

Model No:

Serial No.:

Purchase Date:

LIMITED WARRANTY

What the warranty covers:

We warrant this product to be free from defects in material and workmanship

during the warranty period. If a product proves to be defective in material or

workmanship during the warranty period, we will at our sole option repair or

replace the product with a like product.

How long the warranty is effective:

For accurate warranty period and conditions, please contact local branch offices or

your dealers.

Who the warranty protects:

This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:

1. Any product on which the serial number has been defaced, modified or

removed.

2. Damage, deterioration or malfunction resulting from:

a) Accident, misuse, neglect, fire, water, or other acts of nature,

unauthorized product modification, or failure to follow instructions

supplied with the product.

b) Repair or attempted repair by anyone not authorized.

c) The fault is result of accidental damage or damage in transit or

transportation, including but not limited to liquid spillage.

d) Removal or installation of the product.

e) Causes external to the product.

f) Use of supplies or parts not meeting our specifications.

g) Normal wear and tear.

h) Any other cause which does not relate to a product defect.

3. Removal, installation and set-up service charges.

Limitation of implied warranties:

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND

BEYOND THE DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED

WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

Exclusion of damages:

OUR LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF

THE PRODUCT. WE SHALL NOT BE LIABLE FOR:

1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE

PRODUCT*, DAMAGES BASED UPON INCONVENIENCE, LOSS OF

USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS OF

BUSINESS OPPORTUNITY, LOSS OF GOODWILL, LOSS OF DATA,

LOSS OF SOFTWARE, COSTS OF SUBSTITUTE EQUIPMENT,

INTERFERENCE WITH BUSINESS RELATIONSHIPS, CLAIMS BY

THIRD PARTIES, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL

OR OTHERWISE.

3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.

Effect of state law:

This warranty gives you specific legal rights, and you may also have other rights

which vary from state to state. Some states do not allow limitations on implied

warranties and/or do not allow the exclusion of incidental or consequential damages,

so the above limitations and exclusions may not apply to you.

Limitations of Warranty (for Australian States and Territories)

The Trade Practices Act 1974 and corresponding State and Territory Fair Trading

Acts or legalization of another Government (“the relevant acts”) in certain

circumstances imply mandatory conditions and warranties which cannot be excluded.

This warranty is in addition to and not in replacement for such conditions and

warranties. To the extent permitted by the Relevant Acts, in relation to your product

and any other materials provided with the product (“the Goods”) the liability of Opti

Australia under the Relevant Acts is limited, at the option of Opti Australia to:

•Replacement of the Goods; or

•Repair of the Goods; or

•Payment of the cost of replacing the Goods; or

•Payment of the cost of having the Goods repaired.

Opti Australia reserves the right to request proof of purchase upon any warranty

claim.

Life Support:

We do not recommend the use of our UPS products for life support equipment or

direct care where failure of a UPS product could cause failure of, or diminished

effectiveness of the life support equipment or patient care.

EFFECTIVE October 1, 1997

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS !

THIS MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS.

KEEP THIS MANUAL HANDY FOR REFERENCE.

•CAUTION: A BATTERY CAN PRESENT A RISK OF ELECTRICAL SHOCK,

BURNS FROM HIGH SHORT-CIRCUIT CURRENT, FIRE OR EXPLOSION

FROM VENTED GASES. OBSERVE PROPER PRECAUTIONS.

•WHEN REPLACING BATTERIES, USE THE SAME NUMBER AND THE

FOLLOWING TYPE BATTERIES: SEALED LEAD-ACID MAINTENANCE FREE

(PS1000B: 1234W x2) (PS1500B: 1234W x3) (PS2200B: 7.2AH/12V x8)

(PS3000B: 1234W x8) (PS1000B-RM: 7.2AH/12V x3) (PS1500B-RM: 1234W x3)

(PS2200B-RM: 1221W x8) (PS3000B-RM: 1221W x8)

•PROPER DISPOSAL OF BATTERIES IS REQUIRED. REFER TO YOUR LOCAL

CODES FOR DISPOSAL REQUIREMENTS.

CAUTION: !

THE UPS CONTAINS VOLTAGES WHICH ARE POTENTIALLY

HAZARDOUS. ALL REPAIRS SHOULD BE PERFORMED BY

QUALIFIED SERVICE PERSONNEL.

THE UPS HAS ITS OWN INTERNAL ENERGY SOURCE (BATTERY).

THE OUTPUT RECEPTACLES MAY BE ALIVE EVEN WHEN THE UPS

IS NOT CONNECTED TO AN AC SUPPLY.

Safe and continuous operation of the UPS depends partially on the care taken by

users. Please observe the following precautions.

•Do not disassemble the UPS.

•Do not attempt to power the UPS from any receptacle except a 2-pole

3-wire grounded receptacle.

•Do not place the UPS near water or in environments of excessive humidity.

•Do not allow liquid or any foreign objects to get inside the UPS.

•Do not block air vents on the side of the UPS.

•Do not plug appliances, such as hair dryers, into the UPS receptacles.

•Do not place the UPS under direct sunshine or close to heat-emitting

sources.

•This UPS is intended for installation in a temperature controlled, indoor area

free of conductive contaminants.

•The socket-outlet shall be installed near the UPS and easily accessible.

•With the installation of the UPS it should be prevented, that the sum of the

leakage current of the UPS and the connected consumer exceeds 3.5mA.

•The battery supply should be disconnected in the plus and minus pole at the

quick connectors of the battery when maintenance or service work inside the

UPS is necessary.

•Do not dispose of batteries in a fire, the battery may explode.

•Do not open or mutilate the battery or batteries, released electrolyte is

harmful to the skin and eyes.

•A battery can present a risk of electric shock and high short circuit current.

The following precaution should be observed when working on batteries

* Remove watches, rings or other metal objects.

* Use tools with insulated handles.

FEDERAL COMMUNICATIONS COMMISSION (FCC)

WARNING:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

CANADIAN DEPARTMENT OF COMMUNICATIONS (DOC)

This equipment does not exceed Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulation of the

Canadian Department of Communications. Operation in a residential area

may cause Unacceptable interference to radio and TV reception requiring

the owner or operator to take whatever steps are necessary to correct the

interference.

PS1000B/ PS1500B/ PS2200B/ PS3000 1

TABLE OF CONTENTS

1. INTRODUCTION

1.1 Overview 2

1.2 Sinewave Output 2

1.3 Smart Buck and Boost Line Conditioning 2

1.4 User Replaceable Battery Design 3

1.5 Advanced Interface to Communicate with Computer 3

1.6 User Configurable Settings 3

1.7 Data-Line Surge Protection 3

2. UPS CONTROLS

2.1 External Views 4

Front Panel 4

Rear Panel 5

2.2 On Button 6

2.3 Off Button 6

2.4 Select Button 7

2.5 Load Percentage Bar Graph 7

2.6 Battery Capacity bar graph 7

2.7 Fault code 7

2.8 Status Indication 7

2.9 Communication Port 8

2.10 Start-Up On Battery 8

2.11 Data-Line Surge Suppression 8

3. INSTALLATION AND OPERATION

3.1 Unpacking and Inspection 9

3.2 Placement 9

3.3 Determining How Much Equipment You Can Connect to

Your UPS 9

3.4 Powering Up Your UPS 10

3.5 Connecting Your Equipment to the UPS 10

3.6 Operation and Functional Test 12

3.7 Storage Instructions 12

4. SPECIFICATIONS

4.1 Electrical Specifications 13

4.2 Mechanical Specifications 15

4.3 Environmental Specifications 15

5. TROUBLESHOOTING

5.1 Troubleshooting Chart 16

6. USER REPLACEABLE BATTERY

6.1 Warning 17

6.2 Battery Replacement Procedure 18

2 PS1000B / PS1500B/ PS2200B / PS3000B

1. INTRODUCTION

1.1 Overview

These models are advanced line-interactive true sinewave uninterruptible power

systems (UPS) designed to prevent spikes, surges, sags, transients and

blackouts from reaching your sensitive equipment. Your equipment may include

such items as computers and computerized instruments to telecommunication

systems. When AC power is present, the UPS filters and conditions the power

continuously. When AC power fails, the unit employs its internal maintenance-

free battery to supply back-up power without interruption.

1.2 Sinewave Output

The output voltage is a true sinewave, the same waveform that your equipment

gets from the wall outlet. This provides guaranteed compatibility with all types of

loads and even the most sensitive equipment.

1.3 Smart Buck and Boost Line Conditioning

The voltage from your AC power source can fluctuate above and below the

standard rating. This microprocessor controlled UPS provides line conditioning

via both buck (step-down voltage) and boost (step-up voltage) functions. For

example, if your normal voltage is 120V and the voltage fluctuates up to 132V,

the buck function in your UPS will step it down so that your equipment receives

approximately 120V. If the voltage fluctuates down to 108V, the boost function

will step it up so that your equipment receives approximately 120V. This

provides your equipment with excellent voltage regulation with less possibility

for the UPS to drain its internal battery.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere OPTI-UPS UPS Handbücher

OPTI-UPS

OPTI-UPS Fighter Series FS600 / FS600B Bedienungsanleitung

OPTI-UPS

OPTI-UPS Inverter Series Bedienungsanleitung

OPTI-UPS

OPTI-UPS Line Interactive UPS Series PS1000B-RM Bedienungsanleitung

OPTI-UPS

OPTI-UPS Stabilizer Series SS10000 Bedienungsanleitung

OPTI-UPS

OPTI-UPS Standby UPS System Bedienungsanleitung

OPTI-UPS

OPTI-UPS AS450 Bedienungsanleitung

OPTI-UPS

OPTI-UPS IS1700NT Bedienungsanleitung

OPTI-UPS

OPTI-UPS DS-D33 Bedienungsanleitung

OPTI-UPS

OPTI-UPS High-Frequency Online UPS DS1000E Bedienungsanleitung

OPTI-UPS

OPTI-UPS Clever CS385B Bedienungsanleitung

OPTI-UPS

OPTI-UPS DS1000B Bedienungsanleitung

OPTI-UPS

OPTI-UPS Clever Series CS385B Bedienungsanleitung

OPTI-UPS

OPTI-UPS CS500B Bedienungsanleitung

OPTI-UPS

OPTI-UPS Power PS500C Bedienungsanleitung

OPTI-UPS

OPTI-UPS Reliable Series RS1200 Bedienungsanleitung

OPTI-UPS

OPTI-UPS DS10KB31 Bedienungsanleitung

OPTI-UPS

OPTI-UPS VS400C Bedienungsanleitung

OPTI-UPS

OPTI-UPS Gaming Series GS1100B Bedienungsanleitung

OPTI-UPS

OPTI-UPS VS375C Bedienungsanleitung

OPTI-UPS

OPTI-UPS Gaming Series GS1100B Bedienungsanleitung

OPTI-UPS

OPTI-UPS OD330 Bedienungsanleitung

OPTI-UPS

OPTI-UPS On Line UPS Series DS1000B-RM Bedienungsanleitung

OPTI-UPS

OPTI-UPS PS650D Bedienungsanleitung

OPTI-UPS

OPTI-UPS Green Power Series Master / Slave Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung