Option Audio Globe surfer II Bedienungsanleitung
HSDPA|UMTS|WLAN|LAN|GPRS|GSM
USER GUIDE
GLOBESURFER®II
WIRELESS VOICE / DATA GATEWAY
www.option.com
GLOBESURFER®II
Z06.138_GSII_Man_E.indd 1 22-09-2006 17:06:41
Z06.138_GSII_Man_E.indd 2 22-09-2006 17:06:41
1
Within minutes, you can connect to your mobile network and use a wireless connection to
the Internet through the mobile network.
GlobeSurfer®II is compatible with GSM and 3G mobile networks and supports GPRS, EDGE, UMTS and
HSDPA technologies.
Tip: To achieve the best possible reception, check the signal strength on the display of the unit
(the more bars the better the reception). You may find that placing the unit near a window
provides the best reception.
Simple set-up
GlobeSurfer®II provides you with a quick installation and set-up that gets you easily and quickly
connected to the Internet. You can use an Internet browser (e.g. Internet Explorer 6.0 or Firefox
1.5) and most personal computers, including Windows®, Macintosh® and Linux®. The ‘Quick Setup
Wizard’ introduces you to the basic settings that need to be configured for use with the mobile
network. Once you have configured, you can review and enable customised wireless security settings.
Instant protection
Your GlobeSurfer®II supports Network Address Translation (NAT). This network service hides the com-
puters in your network so they cannot be found or directly accessed from outside your network. A
firewall is also included which, by default, blocks incoming traffic and allows outgoing traffic.
Additional security
GlobeSurfer®II supports both Wireless Equivalent Privacy (WEP) and Wi-Fi Protected Access
(WPA and WPA2) to protect your network data. Security logs keep you aware of potential security
risks and intrusion attempts. You can view logs online or via email.
Stay in touch
You can use GlobeSurfer®II to send and receive SMS text messages. The display on the front of
the unit lets you know when a new SMS arrives.
You can use GlobeSurfer®II to make mobile phone calls. When you get a phone call the display shows
the caller’s number and indicates missed calls.
Important note
To protect your network from unauthorised access, and to make it more difficult for hackers to
analyse your data, please configure the WLAN security settings and enable WEP, WPA or WPA2
encryption on your GlobeSurfer®II.
WELCOME TO GLOBESURFER®II 1
Z06.138_GSII_Man_E.indd 1 22-09-2006 17:06:42
Copyright © 2006, Option
Version 1.0
Information about Option GlobeSurfer®II may change without prior notice. Information published in
this user guide is accurate at the time of publication. Although all security precautions were taken dur-
ing the creation of this user guide Option is not liable toward persons or organisations for losses or
damages caused either directly or indirectly due to instructions contained in this user guide.
All brands and registered brands are property of their respective owners. Services may be changed,
added or deleted. For the newest firmware version for your GlobeSurfer®II, visit http://www.option.com
Information about Option GlobeSurfer®II may change without prior notice. The content of this user
guide was accurate at the time of publication. Although all security precautions are taken during the
creation of this user guide Option is not liable toward persons or organisations for losses or damage
caused either directly or indirectly due to instructions contained in this user guide.
COPYRIGHT
2
Z06.138_GSII_Man_E.indd 2 22-09-2006 17:06:42
3
CONTENTS
Welcome to GlobeSurfer®II 1
Copyright 2
Your GlobeSurfer®II 4
Buttons and connections 4
The front panel display 5
The main screen 5
Incoming calls 6
Missed calls 6
The display screen saver 6
Guidelines for safe and efficient use 7
Getting Started 8
Positioning GlobeSurfer®II 8
Connect your phone 8
First time use 9
Step 1: Insert the SIM card. 9
Step 2: Connect the power adapter. 9
Step 3: Connect your computer 9
Step 4: Log in to GlobeSurfer®II. 10
Step 5: Use the ‘Quick Setup Wizard’. 11
Step 6: Enter the PIN code. 11
Step 7: Making your first call 12
Step 8: Connect to the Internet. 12
Step 9: Set the Date and time 12
Configure your computers 13
Using Ethernet LAN 13
WLAN connection 13
Everyday Use 15
Staying connected. 15
Making phone calls 16
Using the management console 16
Checking the connection status 17
Login to the management console 18
Changing telephone settings 19
Changing your user name and password 19
Restoring the factory default settings 20
Adding a new user 20
Firmware Upgrade 21
Upgrading From a Local Computer 21
Managing SMS text messages 23
Reading a message 23
Writing and sending a text message 24
Sent SMS text messages 25
Saving a message 25
SMS Templates 26
SMS Settings 26
Text Messages on the SIM Card 26
Administration Basics 27
Quick Setup 28
Language 28
Telephony 28
UMTS Setup 28
Wireless Setup 30
Wireless Encryption 30
Firewall Setup 30
Save the Setup configuration 30
Security Basics 31
Review the basics 31
Network Address Translation 30
Determine the wireless exposure 31
Firewall 31
Control the traffic 32
IP- Hostname (url) Filtering 32
Adding a new Web site 33
Modify a Web site address currently
in the table 34
Ensuring that all IP addresses to
Web-sites in the table are blocked 34
Mac Filtering 34
Adding wireless computers to MAC filtering 35
Glossary 36
Specifications 38
Z06.138_GSII_Man_E.indd 3 22-09-2006 17:06:43
YOUR GLOBESURFER®II
Buttons and connections
1. Display. Toggles between main screen and missed calls.
2. On / Off. Press to turn the unit on and off.
3. Connect. Press to connect or disconnect your local network to or from the mobile network.
Tip: Can also be configured to automatically connect or disconnect as required.
See ‘Quick Setup’ on page 28.
4. SIM card slot. Insert or remove the SIM card: press carefully until it snaps in or releases.
5. Telephone. Plug your home telephone into the unit.
6. LAN. Plug the LAN Ethernet cable into the unit.
The LAN connection handles 10/100 Mbit/s.
7. DC 5V Input socket: plug in the power adapter DC cable.
8. Restore defaults. This button is hidden underneath the unit. Press it with a pointed object, like a
paper clip, to restore the unit to its factory default settings. This may be required when you want
to build a new network from scratch, or when changes to network have become unclear or when
the admin password has been lost.
Note: All web-based management settings and parameters, not only those in the Advanced section,
are re-stored to their default values. The administrator password is no longer valid. All other user
names are deleted. All personal configuration settings are deleted, including all SMS messages in
the GlobeSurfer®II memory. Messages on the SIM card are not effected.
Tip: Leave the unit on so that you can connect to the Internet at the push of a button, or automati-
cally if that option is selected. The unit is connected when “Connected” shows on the main screen
of the GlobeSurfer®II front panel display.
4
Z06.138_GSII_Man_E.indd 4 22-09-2006 17:06:44
5
YOUR GLOBESURFER®II
The main screen
1. New SMS received. If blinking, the SMS memory is full.
Tip: delete a few messages to leave space to receive more.
2. Phone icon indicates a missed call. It disappears after you have viewed every missed call.
3. Computer icon and number of computers associated with GlobeSurfer®II via the WLAN.
4. Current time. Displayed when the clock is synchronised.
5. The five bars indicate the mobile signal strength.
6. Connection status.
7. Mobile connection type: GPRS, EDGE, UMTS or HSDPA.
8. The name (or identifier) of your Mobile operator.
Z06.138_GSII_Man_E.indd 5 22-09-2006 17:06:45
YOUR GLOBESURFER®II
Incoming calls
When you get an incoming call the phone number is displayed:
See ‘Making Phone calls’ on page 17
Missed calls
When you press the ‘Display’ button missed calls are displayed. See ‘Buttons and connections’ on
page 5.
1. Missed Calls
2. Current time. Displayed when the clock is synchronised with the network.
3. Call sequence number and total number of missed calls.
4. Phone number of missed call.
5. Date and time of last missed call from that phone number.
Press the ‘Display’ button repeatedly to step through all missed calls until you return to
the main screen.
The display screen saver
A screen saver feature is included to preserve the quality of the display on the unit. When the display
is inactive for a short time, the screen saver activates showing a moving image of the current time.
6
Z06.138_GSII_Man_E.indd 6 22-09-2006 17:06:47
7
YOUR GLOBESURFER®II
Guidelines for safe and efficient use
GlobeSurfer®II contains sensitive electronic components as used in mobile phones and wireless rout-
ers. For safe and efficient use, please follow these guidelines:
• Handle the unit carefully and store it in a clean and dust-free place.
• Do not expose the unit to liquid, moisture or humidity.
• Do not expose the unit to extreme temperatures, either high or low.
• Do not expose the unit to open flames or lit tobacco products.
• Do not drop, throw or try to open the unit.
• Do not paint or place stickers on the unit.
• Do not operate the unit near medical equipment without prior permission.
• Do not use the unit in areas where radio equipment or mobile phones are prohibited.
Z06.138_GSII_Man_E.indd 7 22-09-2006 17:06:48
GETTING STARTED
Positioning GlobeSurfer®II
Position GlobeSurfer®II to ensure the following:
• A good mobile signal: you may find that placing the unit near a window provides
the best reception.
• A good wireless signal: centrally located and quite high up, or close to a window to optimise wire-
less connections to computers in both horizontal and vertical directions, allowing wider coverage.
• The computer or network hub that will be connected to the LAN port is nearby.
• A power outlet is within easy reach.
• The GlobeSurfer®II display is in sight, and the buttons and connectors are within easy reach.
• At least 20 cm away from your person.
• Out of direct sunlight and away from heat sources, power lines, fluorescent lighting fixtures, and
electrical noise such as radios, transmitters and broadband amplifiers.
• Water or moisture cannot enter the case of the unit.
Connect your phone
You can use a typical corded or cordless home telephone.
Plug your phone into the phone socket on GlobeSurfer®II and you are ready to make calls through
the mobile network.
To connect a DECT or wireless telephone you must plug the base unit into GlobeSurfer®II.
You can connect the first telephone outlet into GlobeSurfer®II and thus connect all home tel
ephones through GlobeSurfer®II to your mobile network.
Note: You cannot connect a mobile phone to GlobeSurfer®II.
8
Z06.138_GSII_Man_E.indd 8 22-09-2006 17:06:49
Inhaltsverzeichnis
Andere Option Audio Tor Handbücher
Beliebte Tor Handbücher anderer Marken
LST
LST M500RFE-AS Bedienungsanleitung
Kinnex
Kinnex Media Gateway Bedienungsanleitung
2N Telekomunikace
2N Telekomunikace 2N StarGate Bedienungsanleitung
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung
Telsey
Telsey CPVA 500 - SIP Bedienungsanleitung
