Optoma Optoma EP585 Bedienungsanleitung

English

Usage Notice

Precautions .......................................................................................... 2

Introduction

About the Product................................................................................. 3

Package Overview ............................................................................... 4

Installation

Product Overview ................................................................................. 5

Start Your Installation............................................................................ 7

Powering On/Off the Projection Display................................................ 9

Adjusting the Image Size ...................................................................... 10

User Controls

User Control Overview ......................................................................... 11

Function Descriptions........................................................................... 13

Appendices

Troubleshooting .................................................................................... 17

Maintenance ......................................................................................... 19

Specifications ....................................................................................... 22

Compatibility Modes............................................................................. 23

Table of Contents

English

Precautions

Follow all warnings, precautions and maintenance as recommended in this

user’s manual to maximize the life of your unit.

Do:

qTurn off the product before cleaning.

qUse a soft cloth moistened with mild detergent to clean the display housing.

qDisconnect the power plug fromAC outlet if the product is not being used for a

long period of time.

Don’t:

qBlock the slots and openings on the unit provided for ventilation.

qUse abrasive cleaners, waxes or solvents for your cleaning.

qUse under the following conditions:

- Extremely hot, cold or humid environment.

- In areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic field.

- Place in direct sunlight.

Warning- Do not look into the lens. The bright light may hurt your eyes.

Warning- To reduce the risk of fire or electric shock, do not expose this

product to rain or moisture.

Warning- Please do not open or disassemble the product as this may cause

electric shock.

Warning- When changing the lamp, please allow unit to cool down and follow

all changing instruction.

Warning- This product will detect the life of the lamp itself. Please be sure to

change the lamp when it shows warning messages.

Warning- After changing a new lamp, please reset the lamp life timer from

OSD menu.

Warning- Before switching off the product, please keep the cooling fan

running for a few minutes.

Usage Notice

English

About the Product

This product, designed with a high-powered metal halide lamp, is an SVGA data/

video portable projection display. The outstanding feature of it are listed as follows:

q10.34lbs (4.7 kg) lightweight compact design

q330-watt user replaceable metal-halide lamp

qSingle panel 6.4” TFT LCD projection system

q800 x 600 addressable pixels

qCompression for 1024 x 768 XGA computer image

q16.7M (24-bit) displayable colors

qXGA/ SVGA/ VGA/ VESA/ Mac/ NEC PC-98/ Fujitsu FM Towns compatible

qNTSC / NTSC 4.43/ PAL / SECAM composite video & S-Video

qRemote control with mouse function

qAutomatic image adjustment function

qMultilingual OSD menu adjustments

qAdvanced functions--

keystone correction/ zoom/ freeze/ pointer

Introduction

English

Package Overview

This projection display comes with all the items shown below. Check to make

sure your unit is complete. Contact your dealer immediately if anything is

missing.

LCD Projection Display

Soft Bag

S-Video Cable RCA Audio/ Video Cable Audio-in Cable for

Computer

Battery x 3

Remote Mouse Package:

Remote Receiver Cable Remote Mouse

PC PS/2 Remote Adapter PC PS/2 Mouse Adapter

Mac Remote Adapter Mac Mouse Adapter

User’s Manual

Warranty Card

Power Cord VGA Cable

English

Product Overview

wMainUnit

Installation

Rear Connection Ports

Panel Control Buttons

Keystone Correction

Lens Latch

Lamp Door

Carrying Handle

Elevator Foot

Lamp Latch

Lens

Power Switch

Power

Connector

Fuse

Monitor Loop-

through Connector

Computer Input

Connector

Audio Inputs for

Computer

Audio Outputs

S-Video Connector

Composite Video

Connector

Audio Inputs

for Video

Remote Receiver

Connector

English

wRemoteControl

Directional Select Keys ZoomIn/ZoomOut

* For more detailed information, please refer to “Function Descriptions”

on page 13.

Curtain

Source Selection

Volume

Enter/Pointer

Poweron/Standby

On-ScreenMenus

FREEZE

CURTAIN

STANDBY

ZOOMINZOOMOUTSOURCE

ENTER

POINTER

MUTE

VOLUME

DRAG

Freeze

LIGHT

Mouse Left ButtonDown

Right Mouse Button/

Backlight Function

Left Mouse Button

Joystick

(Mouse Cursor Function)

English

StartYourInstallation

wConnectingtheProjectionDisplay

Monitor Cable

VGA Signal Cable

Audio Cable

S-Video Cable

RCAAudio/ Video

Cable

Power Cord

Remote Receiver Cable

Computer

MousePort

English

Follow regular setup procedures. Make sure you have a 100% compatible Microsoft

Mouseand aMicrosoft Mousedriverinstalled.

4Setting Up Procedure:

1. Turn off your computer.

2. Unplug the mouse from your computer.*

3. Connect the remote receiver cable to the computer and the projection display.

4. If you need an external mouse, connect the mouse with the other end of the

receiver cable.

5. Turn on your projection display first and then your computer.

6. Begin your presentation.

* If you have a Mac or PC PS/2 mouse, use the matching adapters as shown in

the drawing.

Remote Receiver Cable

(Microsoft Mouse Connection)

Mac or PC PS/2 Mouse

(Mac or PC PS/2 Mouse Connection)

Remote Receiver Cable

Microsoft Mouse

Mac or PC PS/2 Mouse Adapter *

Mac or PC PS/2 Remote Adapter

wRemote ControlConnections

English

uPowering On the ProjectionDisplay.

4Switch on the power; then turn on the lamp by pressing “STANDBY”

button.

Press the “ I ” sign of the power switch to turn on the projection display. After a

few seconds, press the “Power on/Standby” button to power on the projection

lamp. At this time, the “Power on/Standby” indicator (the Green Light, see follow-

ing figure) will be illuminated.

*If you wish to turn off the projection display for a short period of time, press

the “Power on/Standby” button. The Amber Light will illuminate. This indi -

cates the projection lamp is powered off and is cooling down.

*If you want to turn on the projection lamp again, you must wait at least 1

minute until the Amber Light is OFF. Be sure the Amber Light is in OFF status

so that you can press the “Power on/Standby” button to turn on the projection

lamp.

uPowering Offthe Projection Display

4Turn off lamp power first for three minute and then switch off the power.

Press “Power On/Standby” button to make the display in “Standby” mode first and

wait for three minutes, then you can switch off the power.

* After pressing the “Power on/Standby” button , you will see a message-

“Power off the lamp?”. Press the “Power on/Standby” button again to turn

off the lamp. Otherwise the message will disappear itself 5 seconds later.

*The projection display will automatically shut down when the lamp is powered

off and is not turned back on within 5 minutes. Please switch off the

power if this occurs.

*Always remember to turn off the projection lamp first and allow it to cool for a

few minutes before switching off the power.

Powering On/Off the ProjectionDisplay

Power Switch

Green Light

Amber Light

English

qPositioning the projection display

(projection distance and image size)

qSlide the lens latch and pop up the projection lens. Switch on the power and

press the “Power on/Standby” button. See “Powering On/Off the Projection

Display” on page 9 for more information.

qAdjusting the screen image.

1. Rotate the projection lens to focus the image.

2. Slide the keystone correction button to adjust image shape.

3. Adjust the elevation:

(1) Pull out the carrying handle.

(2) Lift the projection display to the desired angle.

(3) Press down on the elevator node to loosen the elevator foot.

Keystone Correction

Carrying Handle

Power Switch

Power on/

Standby Buttons

Lens Latch

ElevatorNode

Lens

Adjusting the Image Size

Projection

Distance 5 ft.

(1.5 m) 6.5 ft.

(2 m) 9.5 ft.

(3 m) 13 ft.

(4 m) 20 ft.

(6 m)

Image Size

(diagonal)

40"

(1.01m)

(min.)

60"

(1.52m) 80"

(2.03m) 110"

(2.79m) 160"

(4.06m)

(max.)

Inhaltsverzeichnis

Andere Optoma Projektor Handbücher

Optoma

Optoma DP-3515 Gebrauchsanweisung

Optoma

Optoma Optoma TX612 Bedienungsanleitung

Optoma

Optoma DW312 Bedienungsanleitung

Optoma

Optoma W402 Bedienungsanleitung

Optoma

Optoma ZU500USTe Bedienungsanleitung

Optoma

Optoma Projector with lens cap Bedienungsanleitung

Optoma

Optoma MovieTime DV11 Bedienungsanleitung

Optoma

Optoma HD91 Bedienungsanleitung

Optoma

Optoma ZU506t Bedienungsanleitung

Optoma

Optoma EP706 Bedienungsanleitung

Optoma

Optoma EH341 Bedienungsanleitung

Optoma

Optoma HD33 Bedienungsanleitung

Optoma

Optoma W310 Bedienungsanleitung

Optoma

Optoma TW610 Bedienungsanleitung

Optoma

Optoma EP776 Bedienungsanleitung

Optoma

Optoma TX700 Bedienungsanleitung

Optoma

Optoma EP726i Bedienungsanleitung

Optoma

Optoma TS526 Bedienungsanleitung

Optoma

Optoma EW556 Bedienungsanleitung

Optoma

Optoma TX665UST-3D Bedienungsanleitung

Optoma

Optoma ML1000 Bedienungsanleitung

Optoma

Optoma TW865-NL Bedienungsanleitung

Optoma

Optoma DX346 Bedienungsanleitung

Optoma

Optoma LCT100 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung