Optus Optus CG3000-1STAUS Bedienungsanleitung
Your Optus Premium Speed
WiFi Cable modem
USER GUIDE
Full of
handy hints.
P/N 202-10818-02
1382777E 0411 166321.indd 1 7/04/11 10:41 AM
Introduction
Welcome to the exciting world of Optus Broadband and high quality
Optus Local Access Telephony. Your new WiFi Cable Modem acts as
a cable modem for providing premium speed internet with the ability
to also provide your home phone service.
This guide provides procedures for operating and troubleshooting
your WiFi Cable Modem.
Please note: This equipment requires power to operate. If you have
a telephony service, this is also provided via this equipment, please
ensure that the equipment remains powered at all times to ensure
uninterrupted service.
Carefully read all safety and operating instructions before operating
this product. Retain this guide for future use.
Customer
Username ........................................................................
@optusnet.com.au
1382777E 0411 166321.indd 2 7/04/11 10:41 AM
Contents
Before you begin 2
Front panel and normal operations description 3
Back panel description 4
Macintosh installation 5
Using WPS to configure your wireless 5
Using a Wireless adapter (or Wireless Enabled Computer) 9
Changing your WiFi cable modem password 10
Security 11
Managing your Optus cable account 11
Technical support contact details 11
Frequently asked questions 12
It’s easy.
1382777E 0411 166321.indd 1 7/04/11 10:41 AM
Before you begin
Your WiFi Cable Modem package will contain the following items:
2 BEFORE YOU BEGIN
CG 3000 WiFi Cable Modem
Install Guide
Power Supply
Optus CD Rom
Wireless Information Card
Ethernet Cable
Telephone Cable
SSID:
PASSPHRASE:
Keep me handy
your user information
For wireless support please contact Netgear on 1300 361 254
1277910 04/07
1382777E 0411 166321.indd 2 7/04/11 10:41 AM
FRONT PANEL DESCRIPTION 3
Front Panel Description
The front panel of your WiFi Cable Modem provides status LED’s that indicate how well and what state
your WiFi Cable Modem is operating. See below table for more information on front panel LED status
indicator functions.
1. POWER ON, power is applied to the WiFi Cable modem
2. DS ON, the WiFi Cable modem is receiving data from the cable network
3. US ON, the WiFi Cable modem is sending data to the cable network
4. INTERNET ON, the WiFi Cable modem is registered on the network and fully operational
5. LAN 1-4 ON, a device is connected to one of the Ethernet ports
BLINKING indicates that data is being transferred over the Ethernet connection
6. TEL2 ON indicates telephony service is enabled. Blinks when line 2 is in use
OFF indicates that phone service for TEL 2 is not enabled
7. TEL1 ON indicates telephony service is enabled. Blinks when line 1 is in use
OFF indicates that phone service for TEL 1 is not enabled
8. WIRELESS LINK
By default, the wireless modem router is set up to work as a wireless access point.
Pressing this button turns the wireless access point feature on and off. You can also do
this through the Wireless Settings screen.
9. WPS You can use the Wi-Fi Protected Setup (WPS) feature with clients on the network that are
Wi-Fi certified and WPA capable.
1 2 3 4 5 6 7 8 9
1382777E 0411 166321.indd 3 7/04/11 10:42 AM
4 BACK PANEL DESCRIPTION
Back Panel Description
The following picture shows the description and function of the back panel components on your modem.
1 2 3 4 65
1. TELEPHONE
1 AND 2
RJ-11 telephone ports connect to home telephone wiring to conventional
telephones or fax machines
2. LAN Four RJ-45 Ethernet ports connect to the Ethernet port on your PC or your home network
3. USB
Connects to a printer or mass storage device. This feature is currently disabled. This can
only be made active by a remote software upgrade
Note: Your service does not support data connections via USB, please connect your computer via the Ethernet
port to ensure optimal connection speed.
4. CABLE F-connector connects to an active cable signal from Optus
5. POWER
Connects your residential gateway to the AC power adapter that is provided
with your WiFi Cable modem
Caution: Avoid damage to your equipment. Only use the power supply that
is provided with your modem
6. ON/OFF SWITCH Turns the device on or off. It is recommended that the device remains on at all times.
1382777E 0411 166321.indd 4 7/04/11 10:42 AM
MACINTOSH INSTALLATION 5
Macintosh Installation
To use your WiFi Cable Modem with a Macintosh computer please ensure your computer is set up to use
DHCP (consult your Macintosh user guide for more information) and then connect the Ethernet cable to your
Macintosh and the Modem.
When power is applied to the WiFi Cable Modem, the test light turns on for about 15 seconds and then goes
off. The Power, Internet and Wireless lights should all be lit.
Wait for the Internet light to turn amber.
Using Push ‘N’ Connect (WPS) to
Configure Your Wireless
Network
If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure the
router’s SSID and security settings and, at the same time, connect the wireless client securely and easily to
the router. 1 WPS automatically configures the SSID and wireless security settings for the router (if the router
is in its default state) and broadcasts these settings to the wireless client.
1382777E 0411 166321.indd 5 7/04/11 10:42 AM
If the router has already been configured manually, and either WPS-PSK or WPA2-PSK security has
been enabled, a wireless client can be connected quickly and simply by using the WPS method of
connecting to the wireless network. In this case, the existing wireless settings are broadcast to the
WPS-capable client.
These instructions assume that you are configuring WPS on the router for the first time and
connecting a WPS-capable device.
For a list of other Wi-Fi-certified products available from NETGEAR, go to
http://www.wi-fi.org
.
To set up basic wireless connectivity:
1. Log in to the wireless modem router
at its default address of http://192.168.0.1.
On the router main menu.
2. On the router main menu, select
Add a WPS Client (computers that
will connect wirelessly to the router
are clients). The Add WPS Client
wizard screen displays. Click Next.
NETGEAR’s Push ‘N’ Connect feature is based on the Wi-Fi Protected Setup (WPS) standard.
All other Wi-Fi-certified and WPS-capable products should be compatible with NETGEAR products
that implement Push ‘N’ Connect.
i
If you choose to use WPS, the only security methods supported are WPA-PSK and WPA2-PSK.
WEP security is not supported by WPS.
You can also enter either of these addresses
to connect to your wireless router:
http://www.routerlogin.net or
http://www.routerlogin.com.
i
i
6 USING PUSH ‘N’ CONNECT (WPS) TO CONFIGURE YOUR WIRELESS
1382777E 0411 166321.indd 6 7/04/11 10:42 AM
USING PUSH ‘N’ CONNECT (WPS) TO CONFIGURE YOUR WIRELESS 7
3. Select the method for adding the
WPS client. A WPS client can be added
using the Push Button method or the
PIN method.
Using the Push Button.
This is the preferred method.
• Select the Push Button radio box and
either press the WPS Push Button on the
side of the router or click the soft WPS
Push Button on the screen (as shown
on right).
• The router will attempt to communicate
with the client; you have 2 minutes to
enable WPS from the client device using
the client’s WPS networking utility.
Entering a PIN. If you want to use the
PIN method, select the PIN radio box.
A screen similar to the one shown on the
right displays.
• Go to your wireless client and, from the client’s WPS utility,
obtain the wireless client’s security PIN,
or follow the client’s WPS utility
instructions to generate a security PIN.
• Then, enter this PIN in the Enter
Client’s PIN field provided on the
router and click Next. You have
4 minutes to enable WPS on the
router using this method.
1382777E 0411 166321.indd 7 7/04/11 10:42 AM
Using either method, the client wireless device will attempt to detect the WPS signal from the
router and establish a wireless connection in the time allotted.
• If no connection is detected, then no SSID or security settings are configured on the router.
• If a connection is established, the router WPS screen displays a message confirming that the
wireless client was successfully added to the wireless network. (The router has generated an
SSID, implemented WPA/WPA2 wireless security (including a PSK security password) on the
router and has sent this configuration to the wireless client.)
4. Note the new SSID and WPA/WPA2 password for the wireless network.
To access the Internet from any computer connected to your wireless modem router, launch
a browser such as Microsoft Internet Explorer or Mozilla Firefox. You should see the wireless
modem router’s Internet LED blink, indicating communication to the ISP.
For more information on setting up your wireless network and configuring your wireless security
settings, see the User Manual located online at help.optuszoo.com.au/help/cable
If you are planning a mixed network of WPS capable devices and non-WPS capable devices,
NETGEAR suggests that you set up your wireless network and security settings manually first,
and use WPS only for adding additional WPS capable devices.
i
8 USING PUSH ‘N’ CONNECT (WPS) TO CONFIGURE YOUR WIRELESS
If you require Wi-Fi support for your Optus-supplied NETGEAR Wi-Fi ADSL Modem Router and
Wi-Fi Adapter, please contact NETGEAR on 1300 361 254.
i
1382777E 0411 166321.indd 8 7/04/11 10:42 AM
Andere Handbücher für Optus CG3000-1STAUS
1
Inhaltsverzeichnis
Andere Optus Modem Handbücher
Optus
Optus DPQ3925 Bedienungsanleitung
Optus
Optus Optus CG3000-1STAUS Bedienungsanleitung
Optus
Optus NBN Bedienungsanleitung
Optus
Optus ADSL2+ WIFI MODEM Bedienungsanleitung
Optus
Optus ZTE MU5001 Bedienungsanleitung
Optus
Optus CVG824G Bedienungsanleitung
Optus
Optus InZone Bedienungsanleitung
Optus
Optus AC800S Bedienungsanleitung
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung