Oracle EXADATA X6-2 Bedienungsanleitung
Oracle® Server X6-2 Getting Started Guide
Read this guide before you begin the steps to rack mount, power on, and install an operating system on your Oracle
Server X6-2. For detailed installation instructions, refer to the Oracle Server X6-2 Installation Guide.
Server and Shipped Inventory
1 – Power cords (2) 3 – Documentation 5 – Shipping bracket (X-option)
2 – Rackmount template 4 – Rackmount kit 6 – Server
Before You Begin — Review the Documentation
Review the following documents at: http://www.oracle.com/goto/x6-2/docs
■Oracle Server X6-2 Safety and Compliance Guide — For safety and regulatory compliance information
■Oracle Server X6-2 Product Notes — For late-breaking information that affects installation requirements
■Oracle Server X6-2 Installation Guide — For detailed installation information and procedures
■Oracle Server X6-2 Service Manual — For instructions on how to remove and install server components, and
how to troubleshoot server operation
■Oracle Server X6-2 operating systems installation guides — For installation and configuration information for
Oracle Solaris, Oracle VM Server, Oracle Linux and other Linux, and Windows Server operating systems
■Oracle X6 Series Servers Administration Guide — For software methods to set up the server using BIOS, Oracle
ILOM, and Oracle Hardware Management Pack
■Oracle ILOM Documentation Collection — For descriptions of Oracle ILOM features and functionality
Also, refer to Important Safety Information for Oracle's Hardware Systems that ships with the server.
1
Installing Optional Components
Install optional components, such as memory modules, PCIe cards, or storage drives before rackmounting the server.
Install Optional Components
1. For instructions to install optional components, refer to the Oracle Server X6-2 Service
Manual.
2. Customers with service contracts can find a list of optional server components in the
Oracle System Handbook at:
https://support.oracle.com/handbook_private/
Rackmounting the Server
For rackmounting instructions, refer to the Rackmount Guide and Template that is shipped with the server, the
service label on the server, and the Oracle Server X6-2 Installation Guide. You can use the shipping bracket, ordered
as a separate X-option component, to secure the installed servers when moving a rack.
Preparing for Installation and Power On
Setting up the server for the first time takes about 1 hour. Plan for additional time if you are also installing optional
components and rackmounting hardware.
Caution - Do not apply full main power until instructed to do so. The server includes a service processor
(SP) that is used to configure and monitor the server. To properly configure the server and to view SP
messages, do not apply AC power to the server until the SP and server networking connections are made, as
described in this guide.
Prepare to Install the Server
1. Choose the best way to set up your server environment.
The instructions in this guide work for any networking environment and require a terminal device for
connecting to the server's serial management port (SER MGT). If you have a networking environment
running Dynamic Host Control Protocol (DHCP), you can configure your network using the network
management port (NET MGT) by following the instructions in the Oracle Server X6-2 Installation Guide.
2. Obtain a terminal device.
To communicate with the SP, you need a terminal device, which can be a terminal, a terminal server, or a
laptop running terminal emulation software. Set up the terminal device to communicate using 9600 baud, 8
bit, no parity, and 1 stop bit. For DTE-to-DTE communication, you need to obtain an RJ-45 to DB-9 adapter
with a standard RJ-45 cable to set up a null modem configuration so that transmit and receive signals cross
over.
2
Connecting Cables and Applying Standby Power
The following procedure explains how to cable the server for the first time for connection to the Oracle Integrated
Lights Out Manager (ILOM) service processor (SP).
Connect Cables and Power Cords
Caution - Do not apply full main power to the server until instructed to do so. To properly configure the
server and to view SP messages, cable the server as described in this procedure before applying AC power to
the server.
Use the following figure to locate ports, AC inlets, and status indicators (LEDs) on the server back panel.
1 – AC inlet 0 3 – AC inlet 1 5 – Power/OK LED 7 – SER MGT port 9 – USB ports (2)
2 – AC OK LED 4 – AC OK LED 6 – NET MGT port 8 – NET3-0 ports 10 – VGA video port
1. Connect a serial cable between the server's serial management port (SER MGT) and a
terminal device.
This connection provides the initial communication with the SP.
2. Connect an Ethernet cable between the server's network management port (NET MGT) and
the network to which future connections to the Oracle ILOM SP and host will be made.
Configure the server for the first time using the SER MGT port. After initial configuration, you can set up
communication between the SP and host through this Ethernet interface.
3. For network access, connect an Ethernet cable between one of the the server's Ethernet
NET ports (NET0-3) and the network to which the server will communicate.
Note - Ethernet ports NET2 and NET3 are non-functional in single-processor systems.
4. Connect the power cords to the two AC inlets on the server.
Powering On the Server
The following procedure explains how to power on the server locally using a serial connection and Oracle ILOM. If
you want to power on the server remotely using an Ethernet connection and Oracle ILOM, refer to the Oracle X6-2
Installation Guide for instructions.
3
Power On the Server
Use the next figure to locate status indicators (LEDs) on the server front panel.
1 – SP OK LED 2 – Power/OK LED 3 – Power button
1. Connect the power cords to two separate power sources.
The server can operate with one power source; however, using only one power source eliminates redundancy.
When the power cords are connected to the server's AC inlets and power sources, the following actions
occur:
■The green AC OK power supply LEDs light.
■While the Oracle ILOM SP initializes, the green SP OK LED flashes rapidly.
■Once the Oracle ILOM SP has fully initialized, the SP OK LED is steady on and the green Power/OK
LED flashes slowly, indicating that the host is in Standby power mode.
In Standby power mode, the server is not initialized or powered on.
2. Press Enter on the terminal device to create a connection between the terminal and serial
console of the Oracle ILOM SP.
The Oracle ILOM Login prompt appears.
3. Use the root user account and the password changeme to log in to Oracle ILOM.
host-name login: root
Password: changeme
The Oracle ILOM command-line interface (CLI) prompt (->) appears.
By default, the SP is configured to use DHCP to obtain an IP address. If you plan to assign a static IP address
to the SP, refer to the Oracle Server X6-2 Installation Guide.
For optimal security, change the root password when working in Oracle ILOM. For information about
administrative tasks such as changing passwords, adding accounts, and setting account privileges, refer to
the Oracle X6 Series Servers Administration Guide and the Oracle ILOM documentation at http://www.
oracle.com/goto/ilom/docs.
4. Power on the server and redirect the host output to display on the serial terminal device.
4
-> start /System
Are you sure you want to start /System (y/n/)? y
-> start /HOST console
Are you sure you want to start /HOST console (y/n)? y
Serial console started
The host boots and the server enters Main power mode. The host power-on self-test (POST) and BIOS output
appear on the serial terminal device.
The Power/OK LED flashes rapidly to indicate that the host is booting. The Power/OK LED lights steady on
when the host is booted and the server is in Main power mode.
Installing an Operating System and Drivers
You can now install a supported operating system (OS) on the server. The following table lists the OS installation
options and the related documents that include detailed OS installation and configuration information.
OS Installation Option: Refer to:
Install a supported operating system:
■ Oracle Solaris
■ Oracle VM Server
■ Oracle Linux
■ Red Hat Enterprise Linux
■ Microsoft Windows Server
■ VMware ESXi
■ For Oracle Solaris, Oracle VM Server, Oracle Linux or Red Hat
Enterprise Linux, or Microsoft Windows Server, go to the specific
Oracle Server X6-2 Operating System Installation Guide at:
http://www.oracle.com/goto/x6-2/docs
■ For VMware ESXi documentation, go to:
https://www.vmware.com/support/pubs/
Install supported drivers. Go to My Oracle Support web site at: https://support.oracle.com
Getting the Latest Patches and Firmware
Later versions of operating system patches and server firmware might be available for your server. Some server
features are enabled only when certain versions of patches or firmware are installed. Refer to the Oracle X6-2
Installation Guide for instructions on how to download patches and firmware.
To obtain patch and firmware updates, go to the My Oracle Support web site at: https://support.oracle.com
Managing the Server Using Oracle ILOM
Oracle ILOM is system management firmware embedded on the service processor (SP). Using Oracle ILOM, you
can configure the system independently of the operating system, and monitor system health and performance.
To learn how to use Oracle ILOM functions, refer to the Oracle ILOM Getting Started Guide at: http://www.
oracle.com/goto/ilom/docs
5
Product Documentation Library
Documentation and resources for this product and related products are available at http://www.oracle.com/goto/
x6-2/docs.
Documentation Accessibility
For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program web site at http:
//www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.
Access to Oracle Support
Oracle customers that have purchased support have access to electronic support through My Oracle Support. For
information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.
com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.
Feedback
Provide feedback on this document at http://www.oracle.com/goto/docfeedback.
Copyright © 2016, Oracle and/or its affiliates. All rights reserved.
Copyright © 2016, Oracle et/ou ses affiliés. Tous droits réservés.
Part No: E62165-03
Mfg. No: 7339375
August 2016
6
Andere Handbücher für EXADATA X6-2
5
Inhaltsverzeichnis
Andere Oracle Server Handbücher
Oracle
Oracle SPARC T7-1 Bedienungsanleitung
Oracle
Oracle Sun Fire X2270 M2 Bedienungsanleitung
Oracle
Oracle Sun Netra T5440 Bedienungsanleitung
Oracle
Oracle Netra SPARC S7-2 Bedienungsanleitung
Oracle
Oracle X4-2B Bedienungsanleitung
Oracle
Oracle SPARC T7-2 Bedienungsanleitung
Oracle
Oracle SPARC Enterprise M3000 Bedienungsanleitung
Oracle
Oracle EXADATA X6-2 Bedienungsanleitung
Oracle
Oracle X4-2B Bedienungsanleitung
Oracle
Oracle Sun Server X2-4 Bedienungsanleitung
Oracle
Oracle netra X5-2 Bedienungsanleitung
Oracle
Oracle SPARC Enterprise M4000 Handbuch
Oracle
Oracle X5-2L Bedienungsanleitung
Oracle
Oracle netra X5-2 Bedienungsanleitung
Oracle
Oracle Netra SPARC S7-2 Bedienungsanleitung
Oracle
Oracle netra X5-2 Bedienungsanleitung
Oracle
Oracle SPARC T5-2 Bedienungsanleitung
Oracle
Oracle EXADATA X6-2 Bedienungsanleitung
Oracle
Oracle X8-8 Bedienungsanleitung
Oracle
Oracle Exalytics In-Memory Machine Bedienungsanleitung
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung