Oracle SPARC M8-8 Bedienungsanleitung

SPARC M8-8 and SPARC M7-8 Servers Getting Started

Guide

This guide identifies where you can access the online documentation and summarizes the tasks required to install

Oracle's SPARC M8-8 and SPARC M7-8 servers.

Accessing Documentation

Refer to the SPARC M8 and SPARC M7 Servers Installation Guide for detailed site planning and installation

instructions, and refer to the SPARC M8 and SPARC M7 Servers Product Notes for any late-breaking issues that

impact installation. The installation guide, product notes, and the rest of the server documentation are located at:

■http://www.oracle.com/goto/m8/docs

■http://www.oracle.com/goto/m7/docs

This web site also includes links to documentation for the software and firmware used with the server.

The server includes the following printed documentation:

■Server Rackmount Guide

■Getting Started Guide (this document)

■Important Safety Information for Oracle's Hardware Systems

■License and entitlement documents for the preinstalled software and firmware

Rackmounted and Stand-Alone Servers

You can order a server either factory-installed in an Oracle rack (rackmounted) or stand-alone.

■If you ordered a rackmounted server, see “Rackmounted Server Installation Task Overview” on page 2 for

the installation tasks.

■If you ordered a stand-alone server, see “Stand-Alone Server Installation Task Overview” on page 3 for the

installation tasks.

While this guide summarizes the major tasks required to install both rackmounted and stand-alone servers, refer to

the SPARC M8 and SPARC M7 Servers Installation Guide for the complete installation instructions.

Rackmounted Server Installation Task Overview

Except where noted, refer to the SPARC M8 and SPARC M7 Servers Installation Guide for instructions on

performing the following site planning and installation tasks.

1. Refer to the Important Safety Information for Oracle's Hardware Systems and the SPARC M8-8 and SPARC

M7-8 Servers Safety and Compliance Guide to review the important safety and compliance information.

2. Refer to the SPARC M8 and SPARC M7 Servers Security Guide to understand the security issues relevant to

installing and operating the server.

3. Refer to the SPARC M8 and SPARC M7 Servers Product Notes to review any known issues, workarounds, and

late-breaking news about the server and its software.

4. Confirm that the installation site meets all power source, cooling, and physical space requirements.

5. Prepare the required network addresses.

6. Assemble the required tools and take electrostatic discharge (ESD) and safety precautions.

7. Prepare the receiving area and access route to the installation site.

8. Unpack the server from its shipping container by following the instructions that came with the server.

9. Move and secure the server at the installation site.

10. Install any optional components, such as PCIe cards, into the server.

Refer to the SPARC M8 and SPARC M7 Servers Service Manual for specific instructions.

11. Confirm that the facility power grids that will supply power to the server have circuit breakers and that those

circuit breakers are set to off.

12. Confirm that the power distribution unit (PDU) circuit breakers are set to off.

13. Connect and manage all PDU power cords and data cables to the server.

14. Connect serial cables between terminal devices and the SER MGT 0 ports on the two service processors (SPs).

15. Connect network cables between your network and the NET MGT 0 ports on the two SPs.

16. Switch on the facility power grid circuit breakers and the PDU circuit breakers to supply standby power to the

server.

17. Use Oracle Integrated Lights Out Manager (ILOM) commands to log in to the active SP through a serial

connection.

18. Configure the SP network addresses and other SP settings using Oracle ILOM commands.

19. Power on the server using Oracle ILOM commands.

20. Either set up the preinstalled Oracle Solaris OS and software, or install the Oracle Solaris OS and software on an

external storage device.

Refer to the SPARC M8 and SPARC M7 Servers Installation Guide for more information.

Stand-Alone Server Installation Task Overview

Except where noted, refer to the SPARC M8 and SPARC M7 Servers Installation Guide for instructions on

performing the following site planning and installation tasks.

1. Refer to the Important Safety Information for Oracle's Hardware Systems and the SPARC M8-8 and SPARC

M7-8 Server Safety and Compliance Guide to review the important safety and compliance information.

2. Refer to the SPARC M8 and SPARC M7 Servers Security Guide to understand the security issues relevant to

installing and operating the server.

3. Refer to the SPARC M8 and SPARC M7 Servers Product Notes to review any known issues, workarounds, and

late-breaking news about the server and its software.

4. Confirm that the installation site meets all power source, cooling, and physical space requirements.

5. Confirm that your rack is compatible with the server.

6. Prepare the required network addresses.

7. Assemble the required tools and take electrostatic discharge (ESD) and safety precautions.

8. Unpack the server from its shipping container.

9. Install the stand-alone server in your rack.

Refer to the SPARC M8 and SPARC M7 Servers Installation Guide and the Server Rackmount Guide for

instructions.

10. Install any optional components, such as PCIe cards, into the server.

Refer to the SPARC M8 and SPARC M7 Servers Service Manual for specific instructions.

11. Route, but do not connect, the server AC power cords within the rack.

12. Connect serial cables between terminal devices and the SER MGT 0 ports on the two service processors (SPs).

13. Connect network cables between your network and the NET MGT 0 ports on the two SPs.

14. Connect the AC power cords to the server and to your facility's AC power source.

15. Use Oracle Integrated Lights Out Manager (ILOM) commands to log in to the active SP through a serial

connection.

16. Configure the SP network addresses and other SP settings using Oracle ILOM commands.

17. Power on the server using Oracle ILOM commands.

18. Either set up the preinstalled Oracle Solaris OS and software, or install the Oracle Solaris OS and software on an

external storage device.

Refer to the SPARC M8 and SPARC M7 Servers Installation Guide for more information.

Post-Installation Tasks

After installing and powering on the server for the first time, refer to the following documents for additional

administration and configuration tasks. These documents and links are available online at:

■http://www.oracle.com/goto/m8/docs

■http://www.oracle.com/goto/m7/docs

No. Task Document or Link

1. Check for the latest software updates and firmware versions.

Note - Some server features are enabled only when certain

versions of patches or firmware are installed. Install the latest

available versions for the best performance, security, and stability.

SPARC M8 and SPARC M7 Servers Product Notes

https://support.oracle.com/

2. Perform additional setup and configuration tasks required for your

operating environment and applications.

SPARC M8 and SPARC M7 Servers Administration Guide

3. Consider using Oracle virtualization software.

Oracle VM Server for SPARC is a virtualization feature that

provides the ability to create logical discrete groupings called

logical domains. Each logical domain has its own OS, resources,

and identity within a single computer system. You can run a

variety of applications in different logical domains and keep them

independent for performance and security purposes.

https://docs.oracle.com/en/virtualization/

4. Consider using data center management software.

Oracle Enterprise Manager Ops Center is a data center

management tool that provides many features, including a

comprehensive configuration solution for software provisioning,

hardware fault analysis, and performance management.

http://docs.oracle.com/en/enterprise-manager/

5. If necessary, troubleshoot and isolate server hardware problems. SPARC M8 and SPARC M7 Servers Service Manual

Product Documentation Library

Documentation and resources for this product and related products are available at http://www.oracle.com/goto/

m8/docs and http://www.oracle.com/goto/m7/docs.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program web site at http:

//www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For

information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.

com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Feedback

Provide feedback on this document at http://www.oracle.com/goto/docfeedback.

Part No: E55221-03

Mfg. No: 7350681

September 2017

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Oracle Server Handbücher

Oracle

Oracle X6 series Bedienungsanleitung

Oracle

Oracle Netra Server X3-2 Bedienungsanleitung

Oracle

Oracle Sun Blade X6275 Bedienungsanleitung

Oracle

Oracle SPARC T5-8 Bedienungsanleitung

Oracle

Oracle X5-4 Bedienungsanleitung

Oracle

Oracle X7 series Bedienungsanleitung

Oracle

Oracle JFNA4-7 Installations- und Betriebsanleitung

Oracle

Oracle SPARC Bedienungsanleitung

Oracle

Oracle Netra SPARC S7-2 Bedienungsanleitung

Oracle

Oracle SUN X4-8 Bedienungsanleitung

Oracle

Oracle Sun Netra T5440 Bedienungsanleitung

Oracle

Oracle SPARC S7-2L Bedienungsanleitung

Oracle

Oracle X4-2B Bedienungsanleitung

Oracle

Oracle EXADATA X5-8 Bedienungsanleitung

Oracle

Oracle EXADATA X6-2 Bedienerhandbuch

Oracle

Oracle Sun Server X4-4 Bedienungsanleitung

Oracle

Oracle Fujitsu SPARC M12-1 Bedienungsanleitung

Oracle

Oracle ORACLE9I B10508-01 Benutzerhandbuch

Oracle

Oracle X7-2L Bedienungsanleitung

Oracle

Oracle SPARC T8-4 Bedienungsanleitung

Oracle

Oracle Netra SPARC S7-2 Bedienungsanleitung

Oracle

Oracle SPARC T5-4 Bedienungsanleitung

Oracle

Oracle netra X5-2 Bedienungsanleitung

Oracle

Oracle SPARC M8 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung