Oracle SPARC T5-8 Bedienungsanleitung

This guide describes how to install and power on Oracle’s SPARC T5-8 server for the first time using the

preinstalled Oracle Solaris OS.

Before performing the procedures in this guide, review the following documents at the Oracle documentation

web site: http://www.oracle.com/goto/T5-8/docs

■SPARC T5-8 Server Product Notes - For any late-breaking issues that impact installation requirements.

■SPARC T5-8 Server Installation Guide - For more detailed installation information.

■SPARC T5-8 Server Safety and Compliance Manual - For safety and regulatory compliance information.

■SPARC T5-8 Server Service Manual - For instructions on how to remove or install the server components.

For additional safety information, refer to the Important Safety Information for Sun Hardware Systems, which is

contained in the shipping kit.

Shipment Inventory

1 Server

2 AC power cords (quantity 4)

3 RJ-45 to DB-25 crossover adapter

4 RJ-45 to DB-9 crossover adapter

5 Printed documents

6 Antistatic wrist strap

7 Ethernet cables

8 Rackmounting kit

9 Cable management assembly

10 Rack card

11 Shipping brace

SPARC T5-8 Server

Getting Started Guide

▼Prepare the Server

1. After you remove the server from the box, place it on a mechanical lift if one is available.

Caution – Do not attempt to move the server alone without a lift. At a minimum, the main

components must be removed, and two people are required to move the server without a lift.

2. Remove all of the processor modules, the main module, the power supplies, the fans, and the PCIe

carriers.

For instructions on how to remove these components, refer to the SPARC T5-8 Server Service Manual.

3. Install any PCIe adapters that need to be installed in the PCIe carriers.

For instructions on how to install these components, refer to the Sparc T5-8 Server Service Manual.

4. Install the installation brackets onto the rack.

For instructions on how to install the brackets, refer to the SPARC T5-8 Server Installation Guide.

▼Install the Server

Caution – Do not apply power until instructed to do so. – To properly configure the host server and

view service processor (SP) messages, do not apply AC power to the server until you make the SP and

host networking connections, as described in this guide.

For rackmounting and cable management arm instructions, refer to the SPARC T5-8 Server Installation Guide.

1. Install the server in its intended location.

2. Replace all of the components that you removed.

For instructions on how to install these components, refer to the Sparc T5-8 Server Service Manual.

3. Connect a terminal device between the server’s SER MGT port and a terminal device.

This connection provides the initial communication with the SP. You must configure the server to

communicate using 9600 baud, 8 bit, no parity, 1 stop bit. For DTE-to-DTE communication, use the supplied

RJ-45 crossover adapters with a standard RJ-45 cable to set up a null modem configuration.

4. (Optional) Connect an Ethernet cable between the server’s NET MGT port and the network to which

future connections to the SP and host will be made.

Configure the system for the first time through the SER MGT port. After the initial configuration, you can set

up communication between the SP and host through this Ethernet interface.

5. Connect an Ethernet cable between one of the server’s NET ports and the network to which the server

will communicate.

6. Connect the power cords to the power supplies and to separate power sources.

When the power cords are connected, the SP initializes, and the power supply LEDs light. After a few

minutes, the SP login prompt displays on the terminal device. At this time, the host is not initialized or

powered on.

7. At the terminal device, log in to the SP as root with a password of changeme.

After a brief delay, the Oracle Integrated Lights Out Manager (Oracle ILOM) prompt is displayed. For

optimal security, change the root password. For more information about administration tasks such as

changing passwords, adding accounts, and setting account privileges, refer to the SPARC T5 Series Servers

Administration Guide and the Oracle ILOM documentation.

Note – By default, the SP is configured to use DHCP to obtain an IP address. If you plan to assign a static IP

address to the SP, refer to the SPARC T5-8 Server Installation Guide for instructions.

8. Power on the server and redirect the host output to display on the serial terminal device.

The server initialization might take several minutes to complete.

To cancel the initialization, press the #. (Hash+Dot) keys to return to the Oracle ILOM prompt. Then, type:

stop /System

9. (Optional) Execute other Oracle ILOM commands while the server initializes.

a. To display the Oracle ILOM prompt, press the #. (Hash+Dot) keys.

b. To see information about Oracle ILOM commands, type: help

To see information about a specific command, type: help command_name

c. To return to displaying host output from the server initialization, type: start /HOST/console

10. When prompted, follow the onscreen instructions, and type the configuration information for your

system.

If you are not sure how to respond, accept the default and make changes later when the Oracle Solaris OS is

running. After you confirm the configuration information, the server reboots and displays the Oracle Solaris

SUNSP00144FAC732F login: root

Password: changeme

. . .

-> start /System

Are you sure you want to start /System (y/n)? y

-> start /HOST/console

Are you sure you want to start /HOST/console (y/n)? y

Serial console started.

. . .

11. Log in to the server.

You now can enter Oracle Solaris OS commands at the prompt. For more details, refer to the Oracle Solaris

OS man pages and documentation at:

http://www.oracle.com/goto/Solaris11/docs

http://www.oracle.com/goto/Solaris10/docs

Note – Consider using Oracle VM for SPARC, which is a preinstalled system virtualization feature that provides

a discrete logical grouping with its own operating system, resources, and identity within a single computer

system. You can run a variety of applications in different logical domains, and keep them independent for

performance and security purposes.

▼Check for Latest OS Updates, Patches, and Firmware

Some server features are enabled only when certain versions of patches or firmware are installed. Install the

latest available versions for the best performance, security, and stability.

1. Review the SPARC T5-8 Server Product Notes.

See “Related Documentation” on page 6.

This document describes important product dependencies and late-breaking information.

2. Download the latest available versions from My Oracle Support at:

https://support.oracle.com

Related Documentation

Feedback

Provide feedback on this document at: http://www.oracle.com/goto/docfeedback

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information visit http://

www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/

lookup?ctx=acc&id=trs if you are hearing impaired.

Documentation Links

All Oracle products http://docs.oracle.com

SPARC T5-8 server http://www.oracle.com/goto/T5-8/docs

Oracle ILOM http://www.oracle.com/goto/ILOM/docs

Oracle Solaris 11 OS http://www.oracle.com/goto/Solaris11/docs

Oracle Solaris 10 OS http://www.oracle.com/goto/Solaris10/docs

Oracle VM for SPARC http://www.oracle.com/goto/VM-SPARC/docs

Part Number: E35080-04

Mfg. Number: 7078107

July 2013

Andere Handbücher für SPARC T5-8

Inhaltsverzeichnis

Andere Oracle Server Handbücher

Oracle

Oracle Netra SPARC S7-2 Bedienungsanleitung

Oracle

Oracle X4 series Bedienungsanleitung

Oracle

Oracle Sun Fire X4800 Service-Handbuch

Oracle

Oracle Netra SPARC T4-1B Bedienungsanleitung

Oracle

Oracle X8-2L Bedienungsanleitung

Oracle

Oracle SPARC T5-4 Bedienungsanleitung

Oracle

Oracle X7-2 Bedienungsanleitung

Oracle

Oracle SPARC T7-1 Bedienungsanleitung

Oracle

Oracle Fujitsu SPARC M12-1 Bedienungsanleitung

Oracle

Oracle SPARC Enterprise M4000 Handbuch

Oracle

Oracle Database Appliance X6-2-HA Bedienungsanleitung

Oracle

Oracle netra X5-2 Bedienungsanleitung

Oracle

Oracle SPARC T5-4 Bedienungsanleitung

Oracle

Oracle Video server Bedienungsanleitung

Oracle

Oracle netra X5-2 Bedienungsanleitung

Oracle

Oracle Tekelec 1200 Bedienungsanleitung

Oracle

Oracle netra X5-2 Bedienungsanleitung

Oracle

Oracle Sun Netra T5440 Bedienungsanleitung

Oracle

Oracle Database Appliance X6-2-HA Bedienungsanleitung

Oracle

Oracle Exadata X10M Bedienungsanleitung

Oracle

Oracle Solaris Cluster 3.3 Benutzerhandbuch

Oracle

Oracle SPARC T7-2 Bedienungsanleitung

Oracle

Oracle Sun Fire X4170 M2 Service-Handbuch

Oracle

Oracle SPARC T8-4 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung