Orava AR-111A Bedienungsanleitung

1EN

FM radio

with MP3 player

model: AR-111A model: AR-111A model: AR-111A

AR-111A

Instruction manual

Dear Customer,

Thank you for your conﬁdence in buying our product. Please read this

instruction manual carefully and retain it for future reference.

2EN

The intended use of the device

The device is intended exclusively for the reception of radio

broadcasts and playback of audio formats from digital optical data

carriers or other external audio sources in vehicles, to the extent

determined by technical and operational parameters and functions,

safety and user instructions and external inﬂuences of the operating

environment.

ORAVA Electrical Appliances are manufactured in accordance

with the state of the art and recognized safety-technical rules.

Nevertheless, the use or use contrary to designation may result in

the risk of injury to or endangering the life of the user or third person,

damage to the device and other material values.

1. GENERAL SAFETY INSTRUCTIONS AND

WARNINGS

This document contains important safety instructions and notices

for the safe, correct and economical operation of the electrical /

electronic equipment. Its compliance helps the user avoid risks,

increase reliability and product life.

1.1. General safety instructions

• Before commissioning, we recommend that you carefully read the

operating instructions and operate the equipment in accordance with

the instructions!

• The safety instructions and warnings in this manual do not cover all

the possible conditions and situations that may arise when using

the device. The user must understand that a factor that cannot be

incorporated into any of the products is personal responsibility and

caution. These factors must therefore be ensured by users serving

this device.

• Failure to follow the safety instructions and warnings is forbidden by

the manufacturer for any damage to health or property!

• Remove all packaging material and labels from the device before

using it for the ﬁrst time. Securely keep the packaging material out of

the reach of children and unaccompanied minors.

• Make sure that the appliance is complete and shows no signs of

damage before using the appliance for the ﬁrst time. If the product is

defective or if it has any visible damage, do not use the product.

• Keep the operating instructions as close to the device as possible

throughout its service life. Always keep the operating instructions

together with the device for future use and use by new users.

3EN

• Do not change the technical parameters and features of the device by

unauthorized modiﬁcation or modiﬁcation of any part of the device.

• The manufacturer is not responsible for damages caused during

transportation, misuse, damage or destruction of the equipment due

to unfavorable weather conditions.

• Use the appliance only for the intended purpose and in the manner

speciﬁed by the manufacturer.

1.2. Safety of the operating environment

• Do not use the device in an industrial environment or outside

environment!

• Features of the operating environment

1. Ambient temperature +5 ÷ +40 ° C

2. Humidity 5 ÷ 85%

3. Altitude ≤ 2000 m

4. Occurrence of water occasional occurrence of water vapor

• Additional characteristics are determined by label and part data

„Technical data“ of the operating instructions.

1.3 Electrical safety

• This appliance is intended for installation in vehicles with a 12 V DC

battery and a grounded negative pole.

• Before installing, make sure the vehicle is using a 12 V DC battery.

• Be sure to install the equipment on buses, trucks or caravans that use

a 24 V DC supply voltage.

• By connecting the device to this voltage, there is a risk of irreparable

damage.

• The device operates with a safe voltage, so there is no electric shock

when used and operated under reasonably foreseeable conditions.

• When installing and connecting, make sure that the wiring is in

accordance with the manufacturer‘s instructions in the operating

instructions.

• Improper connection may cause a malfunction or damage to the

vehicle‘s electrical system.

• Take extra care to avoid damage to the insulation of the installation

wires. Secure electrical cables and individual wires with insulating

tape, especially at the crossing points of wires and cables, through

seams in the metal body panels of the vehicle or near the moving

parts.

• Damage to the insulation may result in an electric short circuit

resulting in a ﬁre.

4EN

4. Safety of persons

• This appliance is intended for use by persons without a professional

qualiﬁcation (layperson) according to the instructions speciﬁed by the

manufacturer.

• Device operator includes activities such as switching on and off, user

manipulation and setting of operating parameters, visual or auditory

inspection of the equipment, and user cleaning and maintenance.

• This device may be used by children under 3 years of age and

persons with reduced physical, sensory or mental capabilities or lack

of experience or knowledge when supervised or instructed to use the

device safely and understand the dangers involved.

• Children may not play with the device.

• Cleaning and maintenance of users may not be performed by children

without supervision.

Warning!

• The use of childcare facilities and persons with reduced physical,

sensory or mental capabilities must be limited in accordance with

respect for and observance of legislation governing the safety rules

related to the carriage of persons in motor vehicles.

• The driver of the motor vehicle is responsible for the full compliance

with these regulations. The person responsible for the carriage of

children and other persons in the vehicle.

1.5. Cleaning, maintenance and repairs

• Perform the normal user cleaning and maintenance of the appliance

only as recommended. Do not use solvents or harsh detergents and

articles for cleaning. Pollution and visible

stains from touching ﬁngers, respectively. the hands can be cleaned

using detergents specially designed to clean household appliances

and consumer electronics respectively. equipment installed in the

interior of the vehicle.

• Never ﬁx the appliance yourself!

• Only guarantee qualiﬁed and qualiﬁed personnel (*) for warranty or

post-warranty service*.

(*) Competent qualiﬁed expert: the sales department of the

manufacturer or importer or the person who is qualiﬁed and

authorized to carry out this type of activity with the ability to avoid all

the hazards.

5EN

2. Special Safety Instructions.

Read carefully!

• Electrical equipment is designed and manufactured in such a

way as to allow for safe operation and use by persons without a

professional qualiﬁcation. Despite all the measures that have been to

the manufacturer for safe use, handling and use carries with it certain

residual risks and the associated potential hazards.

• To warn of potential hazards, the following symbols and their

meanings have been used on the device and in the accompanying

documentation:

This symbol warns users that if the following precautions are

not followed during use and operation of the device:

Danger of serious injury or life threatening! Danger of

damage to equipment or other property damage!

This symbol warns users that if the following precautions are

not followed during use and operation of the device:

Dangers of laser radiation!

Transport/Carriage

• When using, for example, of the transport carriage be careful when

moving, to avoid overturning the device.

• Transfer the device ﬁrmly to the back of the device or to the solid

covers. When transferring the device, make sure that your hands and

equipment are not damp or slippery.

There is a risk of damage to the device!

Unpacking/Packaging

• Unpack and remove all parts of packaging material, labels and labels

before putting it into service and place them in a safe place or keep

them out of the reach of children and unaccompanied minors.

• Clean the machine before commissioning as described in the

„Startup“ section. In particular, dispose of all packaging material

residues and possible impurities (e.g. dust).

• Never clean the appliance in a way that could cause the cleaning

liquid to drip into the device. Clean the unit with a slightly moistened

cloth and wipe dry or let it dry.

6EN

Check/Startup

• It is recommended that you carry out the initial and subsequent

periodic inspections of the equipment.

• Never use the appliance if it is incomplete, damaged, or any part of it

has been damaged during use.

• Do not use non-original and incomplete parts of the device and its

accessories.

• Use only recommended parts and accessories to install the device.

There is a risk of serious injury!

There is a risk of damage to the device!

Location/Installation Warning!

• Have the installer installed by a qualiﬁed technician.

• Incorrect and improper installation may have an undesirable effect

on the correct and safe operation of certain safety devices in the

vehicle‘s technical equipment (e.g. direction indicators, brake lights,

horns, ...).

• Always connect the signal wires and power wires to the appliance

only according to the wiring diagram provided.

• The device is intended for installation and installation in the car, in

the part of the dashboard designed exclusively for the location and

connection of the car radio.

• The device is intended for use on vehicles with a supply voltage of

12V DC and grounded negative power pole.

• If there is no place for the installation of the device by the vehicle

manufacturer, select a location for the installation where the operator

controls will not interfere with the vehicle‘s control and where

the device will not endanger the driver or passengers in extreme

situations.

• When installing the device, disconnect the minus pole of the car

battery to reduce the probability of potential damage to the device by

possible electrical short circuit.

• When installing, ﬁrst connect signal cables and speaker wires, and

then connect the power connector of the device.

• If the ignition of the vehicle is not equipped with ACC or the ignition

cable is connected to a permanent power supply, cable from the

battery, it is not possible to power the device with the ignition (i.e.

the device cannot be switched on and off simultaneously with the

ignition).

• If you want to keep the ignition switching on and off depending,

connect the ignition cable to the source for the device that switches

on and off simultaneously with the ignition.

• Ensure that there is enough air circulation around the device.

7EN

• With respect to the correct and reliable operation of the device

(especially when playing CDs), do not exceed the maximum angle of

inclination of the device relative to the horizontal plane by 30 degrees.

• Do not place any objects in the appliance and do not allow foreign

objects to enter the connectors, ventilation openings, and foreign

body covers.

• Do not cover the openings of the covers designed for air ﬂow. Air

ventilation ensures reliable and safe operation of the device.

• Do not expose the device and its accessories to strong vibrations

and / or shocks. Prevent anything from being dropped or hitting any

objects.

• Do not place any containers containing liquids (e.g. beverages) on top

of the machine. Overriding the container and draining the ﬂuid into the

device can cause irreparable damage to the device.

Warning!

• Do not expose the device to:

- direct sunlight,

- excessive mechanical stress,

- excessive dust,

- water and excess humidity (e.g. rain),

- insect,

- an aggressive external environment.

There is a risk of serious injury!

There is a risk of damage to the device!

Operation/Surveillance

Caution!

• Use the car radio only when and in such a way

that the circumstances of the trafﬁc situation

really allow it!

• As a driver of a motor vehicle, you are fully

responsible for the safety, the safety of your

passengers and the impact of your vehicle on

transport safety!

• Use caution to ensure safety while driving, and

observe at least the following precautions:

• Pay particular attention to driving your car in all

circumstances!

• To achieve the highest possible level of safety

when driving a car, it is necessary for the car

radio user to get the most out of the functions

and service before driving.

8EN

• Always stop the vehicle if necessary to deal with

an unforeseen or serious situation while driving

(in connection with solving the problem or setting

up the device)!

• Use the car radio functions only to the extent that

you are constantly in control of your vehicle in all

trafﬁc situations!

• To set the volume level, always hear the acoustic

prompts and signals at any trafﬁc situation

coming from the outside environment of the

vehicle, in particular the police emergency

vehicle, the emergency medical service or the

ﬁre brigade.

• Do not leave the external audio source on the

dashboard at all. The device could ﬂy into the

driver‘s or passenger compartment for a sudden

ride and cause serious injury!

• Never leave outside audio sources near airbags.

The device could be ﬁred into the passenger

compartment when the airbag is deployed and

could cause serious injury!

• It is forbidden to hold external audio sources

while on the move or to have on the knees. The

device could ﬂy into the driver‘s or passenger

compartment for a sudden ride and cause

serious injury!

• Always route the cable to connect an external

audio source so that the driver and passengers

do not limit the driving experience.

There is a risk of serious injury or life

threatening!

9EN

• For the safe and reliable operation of the

electronic equipment at low temperatures

and excessive humidity (e.g. in winter), ﬁrst

allow the device to „acclimatize“ (to ensure

the temperature and humidity of the vehicle

cabin) to remove any moisture in the electrical /

electronic parts, which occurs when the ambient

temperature changes.

Caution!

• The device may be (depending on the type)

equipped with a laser beam unit - Class 1 laser

device.

• The device is safe for users under reasonably

foreseeable operating conditions.

• Follow the following safety precautions to avoid

laser radiation:

- Never open the device or remove its covers.

- Only have the appliance serviced by a qualiﬁed

specialist in an authorized service facility.

- Do not make any changes on the device.

• Laser radiation is dangerous to sight!

• There are no parts or components inside the

device that you can repair yourself. Repairs to

the unit may only be performed by authorized

service personnel.

• Never overload the machine beyond the limits

set by the technical speciﬁcations!

• If you notice any unusual occurrences (sounds,

smell, smoke, ...) while using the device, switch

off the device immediately and disconnect it from

the power supply. Have the appliance checked

by a specialist workshop.

• Never underestimate the potential hazards and

pay extra caution!!!

10EN

Assembly

• Temporarily connect all cables before making a deﬁnitive installation and check that the

device is working normally. Then, before ﬁtting, select the front panel.

• Only install the device with the supplied parts.

• Contact your car dealer for further details on the need for vehicle modiﬁcations.

• Select the mounting location so that the device does not interfere with driving the vehicle or

the driver.

• The maximum mounting angle should not exceed 60 degrees.

• Do not mount the device in locations subject to high temperatures such as direct sunlight or

hot air, dust, dirt or excessive vibration.

Front/rear assembly DIN

The device can be mounted by inserting into the bracket (DIN front assembly) or by screwing

through holes on the sides of the device (rear DIN assembly). For installation details, refer to

Fig. A, B and C.

DIN Front Mounting (Method A)

1. Dashboard

2. Console

After inserting the bracket into the dashboard, select and screw the appropriate tabs with

the screwdriver to secure the bracket in the hole.

3. Flexible rubber case

Na zadnú stranu zariadenia naskrutkujte závitovú skrutku a nasuňte na ňu gumové puzdro.

4. Slide the device into the bracket to snap it.

1. Dashboard

2. Console

3. Flexible (rubber) sleeve

Inhaltsverzeichnis

Andere Orava Radio Handbücher

Orava

Orava RR-29B Bedienungsanleitung

Beliebte Radio Handbücher anderer Marken

EisSound

EisSound KBSound iSelect Bedienungsanleitung

Midland

Midland 1001LWX Bedienungsanleitung

Konig

Konig HAV-SR41 Bedienungsanleitung

Roberts

Roberts exprssion Bedienungsanleitung

VDigi

VDigi DD3.0 Bedienungsanleitung

Radio Shack

Radio Shack 21-1863 Bedienungsanleitung

Roberts

Roberts Stream 207 Bedienungsanleitung

Sony

Sony Walkman SRF-M97 Bedienungsanleitung

Stanley

Stanley FatMax FMC770 Bedienungsanleitung

auna

auna DAB-Radio 10026947 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR190 Bedienungsanleitung

HYT

HYT TC-320 Bedienungsanleitung

auna multimedia

auna multimedia Yellowstone 10026851 Bedienungsanleitung

B-Tech

B-Tech GMRS-V2 Bedienungsanleitung

Weierwei

Weierwei VEV-V8 Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER DAB750 Bedienungsanleitung

Telefunken

Telefunken TF-1505 Bedienungsanleitung

Makita

Makita LXRM03 Bedienungsanleitung