ORBCOMM OGi Montageanleitung

OGi Modem

Hardware Guide

T401, Version .15

Jan 2016

OGi Modem - Hardware Guide

T401, Version .15 ii © ORBCOMM Proprietary

Legal Notice

This documentation is owned by ORBCOMM and protected by applicable copyright laws and international

treaty provisions. Other copyrighted names used are the property of their respective owners. Therefore, you

must treat this documentation like any other copyrighted material. You may not make the documentation, or

copies thereof, available in any manner or form, or use, copy or transfer any part, to anyone outside your

company.

If you received this documentation by electronic transmission or download, by installation or use of the

documentation, you acknowledge that you have read and understand this license agreement and agree to be

bound by its terms and conditions.

This documentation is provided on an as-is basis without any warranty of any kind. You assume the entire risk

as to the results or performance of the software. Under no circumstance shall ORBCOMM be held liable for

any direct, indirect, consequential, or incidental damages arising from the use or inability to use the software

or documentation.

All trademarks or registered trademarks are the property of their respective owners. INMARSAT, the Inmarsat

logo and IsatData Pro are trademarks of Inmarsat used under license by SkyWave (an ORBCOMM company).

Inmarsat is not responsible for the operation and regulatory compliance of the products and services referred

to in this document that connect to the Inmarsat system.

ORBCOMM reserves the right to make changes to products and or specifications without notice.

Contact Information

SkyWave Mobile Communications Inc., an ORBCOMM company

Online:

Website www.SkyWave.com

Online Documentation:

Login at support.skywave.com and follow the link to the downloads section

Customer Support by Email:

support@skywave.com

Customer Support by Telephone:

+1.613.836.2222

Documentation Feedback:

The Customer Documentation Department creates the technical manuals. Use the

address below to tell us what you think about our technical documentation and if you

have suggestions for improvement.

In your feedback please reference a specific document number or title. We read all

feedback carefully, but please note that we cannot respond to the comments you

submit. If you require technical assistance, please contact Customer Support.

documentation@skywave.com

OGi Modem - Hardware Guide

TABLE OF CONTENTS

Legal Notice....................................................................................................................................ii

Contact Information......................................................................................................................ii

List of Figures................................................................................................................................ v

List of Tables.................................................................................................................................. v

Preface........................................................................................................................................... vi

Purpose ........................................................................................................................................ vi

Errata Sheet.................................................................................................................................. vi

Audience...................................................................................................................................... vi

Notation ....................................................................................................................................... vi

Reference..................................................................................................................................... vi

Safety Disclaimer......................................................................................................................... vi

Environmental Protection ........................................................................................................... vii

Safety Precautions....................................................................................................................... vii

Limited Liability......................................................................................................................... vii

Certification................................................................................................................................ vii

Warranty....................................................................................................................................viii

1Overview.............................................................................................................................. 9

1.1 Overview of the Messaging System................................................................................... 9

1.2 OGi Modem...................................................................................................................... 10

1.2.1 Remote Antennas........................................................................................................ 10

1.2.2 Unpackaged Antennas................................................................................................. 11

1.3 Key Features and Benefits................................................................................................ 12

1.4 Operating Modes.............................................................................................................. 12

1.4.1 Satellite Modem.......................................................................................................... 12

1.4.2 GNSS Receiver ........................................................................................................... 12

2Compliance........................................................................................................................ 13

3Specifications..................................................................................................................... 14

3.1 Connector......................................................................................................................... 14

3.1.1 Pin Designations.......................................................................................................... 14

3.1.2 Pin Descriptions.......................................................................................................... 14

3.2 RF Connector ................................................................................................................... 15

3.3 RF Connection Specifications.......................................................................................... 16

3.4 Power................................................................................................................................ 16

3.4.1 Average Power Consumption ..................................................................................... 16

3.4.2 Inrush Current ............................................................................................................. 16

3.5 Serial Interface ................................................................................................................. 17

3.5.1 Master Reset................................................................................................................ 17

3.6 Frequency......................................................................................................................... 17

3.7 Antenna Specifications..................................................................................................... 17

3.7.1 Standard Antenna........................................................................................................ 18

3.7.2 Low Elevation Antenna............................................................................................... 18

3.8 Multi-GNSS ..................................................................................................................... 18

3.8.1 1PPS Signal................................................................................................................. 18

3.9 Mechanical Properties...................................................................................................... 18

OGi Modem - Hardware Guide

T401, Version .15 iv © ORBCOMM Proprietary

3.9.1 OGi Modem ................................................................................................................ 18

3.9.2 Packaged Antenna –Standard..................................................................................... 19

3.9.3 Packaged Antenna –Low Elevation ........................................................................... 19

3.9.4 Unpackaged Antenna –Standard................................................................................ 19

3.9.5 Unpackaged Antenna –Low Elevation....................................................................... 19

3.10 Physical Dimensions ........................................................................................................ 20

3.10.1 OGi Modem ................................................................................................................ 20

3.10.2 Packaged Antenna - Standard ..................................................................................... 22

3.11 Environmental.................................................................................................................. 26

3.12 Mobile Identification Number.......................................................................................... 28

4Integration Guidelines...................................................................................................... 29

4.1 Regulatory Guidelines...................................................................................................... 29

4.2 Compliance....................................................................................................................... 29

4.2.1 Reference Power Supply............................................................................................. 29

4.2.2 Review Process ........................................................................................................... 29

4.3 EMI/EMC Guidelines....................................................................................................... 29

4.3.1 Typical Integration...................................................................................................... 30

4.3.2 Antenna Cable Guidelines........................................................................................... 30

4.3.2.1 General Guidelines for Antenna Positioning.......................................................................30

4.3.3 Host Shielding............................................................................................................. 30

4.3.4 Decoupling.................................................................................................................. 31

4.4 Maximum Current............................................................................................................ 31

4.5 Enclosure Design.............................................................................................................. 31

4.5.1 Label Guidelines ......................................................................................................... 32

4.5.2 Mating Connector Guidelines ..................................................................................... 32

4.6 Modem Mounting Guidelines........................................................................................... 32

4.7 Unpackaged Antenna Mounting Guidelines .................................................................... 33

5Antenna Installation ......................................................................................................... 34

5.1 Antenna Mounting Guidelines ......................................................................................... 34

5.2 Mount a Remote Antenna................................................................................................. 35

5.2.1 Screw Mount............................................................................................................... 35

5.2.2 Adhesive Mount.......................................................................................................... 36

5.2.2.1 Silicone Side Connector Mount ..........................................................................................37

5.2.2.2 Silicone Bottom Connector Mount......................................................................................38

APPENDIX A Order Part Numbers....................................................................................... 41

APPENDIX B Remote Antenna Template............................................................................. 42

Acronyms/Glossary..................................................................................................................... 43

Revision History .......................................................................................................................... 44

OGi Modem - Hardware Guide

List of Figures

Figure 1 Messaging Gateway...................................................................................................... 9

Figure 2 OGi Modem ................................................................................................................ 10

Figure 3 Antennas...................................................................................................................... 11

Figure 4 Antenna Bottom Mount (standard antenna shown)..................................................... 11

Figure 5 Unpackaged Standard Antenna................................................................................... 11

Figure 6 Unpackaged Low Elevation Antenna.......................................................................... 12

Figure 7 Modem Connector Pinout - Top View of Modem (odd numbers).............................. 14

Figure 8 Modem Connector Pinout - Bottom View of Modem (even numbers)....................... 14

Figure 9 Top View Dimensions (mm)....................................................................................... 20

Figure 10 Side Views (mm)....................................................................................................... 21

Figure 11 Bottom View ............................................................................................................. 21

Figure 12 Packaged Antenna (Standard and Low Elevation) - Bottom View (mm) ................. 22

Figure 13 Packaged Standard Antenna Height Dimensions (mm) ............................................ 22

Figure 14 Packaged Low Elevation Antenna Height Dimensions (mm)................................... 23

Figure 15 Standard Unpackaged Antenna –Top View (mm).................................................... 23

Figure 16 Standard Unpackaged Antenna –Side View (mm)................................................... 24

Figure 17 Unpackaged Antenna (Standard and Low Elevation) –Bottom View (mm)............ 24

Figure 18 Unpackaged Antenna (Low Elevation) –Top View (mm) ....................................... 25

Figure 19 Unpackaged Antenna (Low Elevation) –Side View (mm)....................................... 25

Figure 20 Mobile ID Location................................................................................................... 28

Figure 21 Typical OEM Integrator Modem Design................................................................... 30

Figure 22 Modem Mounting Holes............................................................................................ 32

Figure 23 Antenna Cable Bend Radius...................................................................................... 35

Figure 24 Air Vent Feature........................................................................................................ 36

Figure 25 Air Vent Feature........................................................................................................ 37

Figure 26 Apply Silicone to Remote Antenna........................................................................... 37

Figure 27 Drill Mounting Hole.................................................................................................. 38

Figure 28 Attach Cable to Antenna ........................................................................................... 39

Figure 29 Apply Silicone to Hole in Asset................................................................................ 39

Figure 30 Apply Silicone to Terminal ....................................................................................... 40

List of Tables

Table 1 Satellite Modem Operating Modes ............................................................................. 12

Table 2 Modem Electrical Pin Assignment.............................................................................. 14

Table 3 Typical Power Consumption (current)........................................................................ 16

Table 4 Multi-GNSS Typical Specifications............................................................................ 18

OGi Modem - Hardware Guide

T401, Version .15 vi © ORBCOMM Proprietary

Preface

Purpose

This document provides an overview of the hardware characteristics and specifications

for the OGi modem.

Errata Sheet

Refer to the SkyWave Customer Support website for updates or for an Errata Sheet that

might be available after the release of this document. Always check the website for the

most current documentation.

Audience

This document is for technical readers. It provides information to ensure successful

integration of the OGi modem.

Notation

An OEM Integrator is an ORBCOMM customer who purchases an OGi modem for

integration into their own enclosure. To become an OEM Integrator certain commercial

criteria must be met. Contact your Account Executive for further details.

Hardware components and hardware labels in this document might not be exactly as

shown and are subject to change without notice.

CAUTION This safety symbol warns of possible hazards to personnel,

equipment, or both. It includes hazards that will or can cause

personal injury, property damage, or death if the hazard is not

avoided.

Note: A note indicates information with no potential hazard. A note indicates points

of interest or provides supplementary information about a feature or task.

Numbered lists indicate a series of steps required to complete a task or function.

Bulleted lists highlight information where order or sequence is not crucial.

Reference

The content of the following documents might be useful in conjunction with this guide.

These documents are available from the downloads section at support.skywave.com or

from the OG Toolkit, which is also available from the website.

[T402] OG Interface Developer Guide

[T403] AT Interface Developer Guide

Safety Disclaimer

ORBCOMM makes no warranties, representations or guarantees that the products and

network services are suitable for any use in any hazardous environments requiring fail

OGi Modem - Hardware Guide

safe performance (including without limitation marine safety and distress systems,

operation of nuclear facilities, aircraft navigation or communications systems, weapons

systems, air traffic control and life support services) or any other application in which the

failure of the products or network services could result in death or personal injury.

Purchasers assume all liability associated with selling any products and network services

for any such applications, and the Purchaser will defend, indemnify, and hold

ORBCOMM harmless against any claims against ORBCOMM for loss, damage, liability,

or expense (including lawyers’ fees) arising out of or related to the sale by Purchasers or

any Reseller, or the use by any end user, of any product or network service.

Please read all cautions and warnings throughout this document.

Environmental Protection

The Purchaser’s enclosure must provide environmental protection for the OG ISAT

modem.

Safety Precautions

The terminal must comply with all safety precautions relating to the operation, usage,

service and repair of the terminal. ORBCOMM assumes no liability for the customer’s

failure to comply with any of these precautions.

Caution warnings appear throughout this document.

Limited Liability

ORBCOMM’s liability is limited to the cost of repair or replacement of any of

ORBCOMM’s products during the warranty period. To the maximum extent permitted by

applicable law, ORBCOMM’s total liability for damages of any kind, whether based on

breach of contract, tort (including negligence), product liability, incidental, special,

consequential, indirect or similar damages with product application and usages will be

limited to an amount equal to the product's original price paid by the Purchaser to

ORBCOMM and this limitation of liability is reasonable given the price of ORBCOMM's

products. In no event will ORBCOMM be liable to the Purchaser, any resellers of the

Purchaser or any end user for any lost profits or savings, lost business, loss of data, any

telecommunications breakdown, unavailability, downtime, interruption or delay, any

suspension of service by any third party service provider including Inmarsat or any

incidental, special, indirect, or consequential damages, whether based on breach of

contract, tort (including negligence), product liability, incidental, special, consequential,

indirect or similar damages and whether or not ORBCOMM has been advised of the

possibility of such occurrence or damage. The parties agree that the foregoing represents

a fair allocation of risk hereunder.

Certification

The Purchasers is responsible for ensuring that the Purchaser's integrated product

complies with all local electrical and safety codes. The Purchaser is also responsible for

certifying all of their integrated products.

OGi Modem - Hardware Guide

T401, Version .15 viii © ORBCOMM Proprietary

Warranty

ORBCOMM provides a manufacturer’s warranty to the original purchaser (Purchaser)

that its products and services will perform in accordance with ORBCOMM’s

specifications and will be free from defects in material and workmanship for a limited

period of time. This warranty is limited to the repair and/or replacement of any defective

components experienced under normal specified operating use and storage conditions, at

ORBCOMM’s discretion. It does not cover any damages caused or associated with the

product’s misuse. Please check your agreement for warranty details and conditions. The

end-user’s only remedy or recourse is against the Purchaser, and any experience with

defective products should be communicated to the authorized distributor from whom they

have been purchased. Shipping of defective product, back to the authorized distributor

will be in accordance with the authorized distributor's instructions and should be

accompanied with a fault report. ORBCOMM is not responsible for corrosion damage

caused by inadequate enclosure or cable assembly or installation. Warranty is void if

unit is opened.

A fault report is required for each unit returned under warranty. Please contact your

authorized distributor's customer support for additional information.

OGi Modem - Hardware Guide

1 Overview

The OGi modem is an L-Band mobile device and provides either an AT interface or an

OG interface for command and control. Hardware using an AT interface operates on the

IsatData Pro gateway while hardware using an OG interface operates on the ORBCOMM

gateway. ORBCOMM’s turn-key OEM solutions are intended for early integration into

M2M applications.

An OGi modem contains a satellite transceiver and a GNSS receiver, and requires a

specific passive antenna. The modem accepts commands and returns responses via a

serial interface.

The modem is suitable for both industrial and fixed applications such as:

Transportation and Distribution

Fleet management and security

Asset tracking, monitoring and control

1.1 Overview of the Messaging System

The IsatData Pro service allows OEM Integrators to offer particular applications and/or

services to their clients. As shown in Figure 1, the OEM Integrator communicates with

the modem through a centralized gateway. The gateway is the communications hub of the

system, controlling access to the modem and routing traffic to the modem, regardless of

where it is deployed in the world.

Figure 1 Messaging Gateway

Configuration and data retrieval from the modem can be easily accomplished through

Internet-based application services provided by OEM Integrators or by integrating

existing customer enterprise software to receive information from the Gateway.

IsatData Pro provides the following key features and benefits:

Two-way communication

Messaging to a host connected to the modem

Solution Provider

and Customer Site

Internet

Gateway

Land Earth

Station (LES)

Satellite

OGi Modem

GPS

Satellites

Computer

OGi Modem - Hardware Guide

Broadcast messages

Low latency messaging

Up to 6,400 bytes from-mobile messages for the AT Interface; up to 6,000 bytes

from-mobile messages for the OG Interface

Up to 10,000 bytes to-mobile messages for the AT Interface; to-mobile messages

for the OG Interface are truncated

Acknowledged messages

Global service

1.2 OGi Modem

The OGi modem provides easy integration and the highest level of EMI/EMC shielding

that reduces integration risk when the modem is co-located with other electronics.

Figure 2 OGi Modem

1.2.1 Remote Antennas

Two passive antenna types are available: a standard antenna (Figure 3) and a low

elevation antenna (Figure 3). The standard antenna has an elevation angle of 20 to 90°

and the low elevation antenna has an elevation angle of -15 to 90°. The OEM Integrator

is responsible for providing a specific RF cable to connect the antenna to the modem.

Both the standard and low elevation antennas are:

Available with a side or bottom connector

Sealed for operating in outdoor environments

Provide four mounting tabs for installation

Available with an SMA connector

Available packaged or unpackaged

Inhaltsverzeichnis

Andere ORBCOMM Modem Handbücher

ORBCOMM

ORBCOMM OG2 Gebrauchs- und Pflegehandbuch

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung