ORBYS TAB F21 NEO Bedienungsanleitung

User’s manual

Please read this manual before using

the device and keep it for future

purposes.

Read ﬁrst

Support

Legal warning

•

+34 961 002 841 www.orbys.eu

From ORBYS we want to thank you for the acquision of your new tablet F21 NEO. To ensure the

most appropriate use of your tablet, please consult this User Manual before using the device.

Please keep this documentaon for future reference.

Your ORBYS F21 NEO has a Support Service from which you will be aended to in order to solve

all the doubts and problems that may arise with your tablet.

When you contact the Support Service, you will be asked for full contact details and the device's

serial number (ﬁnd it on the back of the tablet just above the CE logos).

When mobile data is acvated to use data and/or voice services (web browsing, downloads, email,

etc.), the operator may apply fees. Please check your contracted data plan before using the mobile

data feature.

The device can be connected to 4G/LTE mobile networks. The use of these networks depends on

the availability of the operator and the region. When connected to 4G/LTE networks, the

browsing speed is faster, but baery performance may be reduced.

The features/images shown in this manual may not exactly match your purchased tablet due to

possible soware, hardware and/or ﬁrmware updates.

The company is not responsible for loss of data or personal harm caused by improper use of the

device, including soware, hardware, replacement of incorrect baeries, etc.

The owner will be responsible for backup of his documents, ﬁles, images, applicaons and all types

of informaon stored on the device. It is strongly recommended that backups are made

periodically and acve policies should be applied to prevent loss of informaon.

The company cannot control any user discussion, misunderstanding or misuse of this manual. The

company assumes no responsibility for any relevant, accidental or potenal losses incurred in the

process of using this manual.

The device is a sealed unit. There are no parts inside that can be repaired and/or replaced by the

end user. Aempng to open or modify the device will void the warranty.

The company is not responsible for performance problems or incompabilies caused by

third-party applicaons.

The company is not responsible for performance problems caused by the changes of conﬁguraon

parameters, as well as incompabilies of some third party applicaons.

The logo of Android, Google™, Google Maps™, Google Mail™, YouTube™, Google Play™ Store,

Google Latude™, and Google Talk™ are registered trademarks of Google, Inc.

Wi-Fi®, Wi-Fi Protected Setup™, Wi-Fi Direct™, Wi-Fi CERTIFIED™, and the logo of Wi-Fi are

registered trademarks of Wi-Fi Alliance, Bluetooth® is a registered trademark of Bluetooth SIG,

Inc.

MicroSDTM is a registered trademark of SD-3D, LLC.

The company reserves the right to provide a ﬁnal explanaon of this manual.

If you are in a foreign country, check the use of mobile data while roaming to avoid extra costs due

to the use of other operators' networks.

Safety Information

•

To avoid major loss or damage to the product, please read all the informaon in this secon before

you use it:

Do not drop, hit, punch, drill or crush the device, it could cause damage to the screen surface,

hardware problems and loss of data stored on the tablet.

The screen of the device is made of glass. It could break due to a fall, heavy objects placed on it or

a strong impact. In case of breakage, do not touch the screen or try to replace it or remove it. Stop

using the device immediately aer breakage and contact the Technical Service.

Do not leave the device exposed to liquids or environments with high humidity. Leakage of these

could result in soware and/or hardware failure.

Do not aempt to replace or repair the device's baery. You may damage it and/or cause

overheang and/or injury. The baery should only be repaired and/or replaced by the oﬀcial

Technical Service.

The device has a headphone socket. Please adjust the volume of the headphones before you use

it to a suitable and safe level. Excessive use of headphones for a long period of me at high volume

can be harmful.

Do not disconnect the device from the power source during soware and/or ﬁrmware updates or

downloads. This could result in loss of data or problems with the device.

Do not connect the device to the power supply during a thunderstorm.

Do not connect the device to damaged or faulty electrical sockets.

Do not use the device in places that are not permied (hospitals, petrol staons, chemical stores

and similar). Always respect the rules, instrucons and warning signs of the diﬀerent places.

Respect signs and warnings that do not permit or restrict the use of mobile devices.

Do not use incompable accessories. Only original accessories and baeries may be used.

Do not use the device while driving or operang machinery

If you suﬀer from any illness or have any symptoms that you think could be aﬀected by the use of

the device, please consult your doctor before using it.

Do not use the device to call while it is charging.

Turn the device oﬀ when you are on a plane.

Turn oﬀ and disconnect all cables from the device before cleaning. Do not use chemical liquids

and/or detergents to clean the device. Only clean the screen and the casing with a so, clean,

slightly humidiﬁed cloth.

Plasc bags can be dangerous. Keep them out of the reach of children to avoid the danger of

asphyxiaon.

The device contains radios that emit electromagnec ﬁelds. Do not use it near medical devices

such as pacemakers, deﬁbrillators or other medical devices, because the device may interfere with

them.

Do not force a connector into the port or apply excessive pressure, as this may cause damage to

the hardware.

Do not use the device when it is exposed to high temperatures or if it is exposed to direct sunlight

for long periods, it may overheat and cause hardware failure.

Do not press the buons on the device too hard, as this could cause damage to the hardware.

If you use applicaons, games, funcons, coverage, etc... that need more performance (CPU, RAM,

Baery, 4G/LTE) or if they are used for long periods of me, you can cause your device to heat up

temporarily.

How to ﬁt your tablet in keyboard/case

Your ORBYS F21 NEO includes a keyboard that serves as a stand in the lectern posion. It is very

important to follow the instrucons for correct opening and fastening of the device in order to

avoid breakage. You must not force or exceed its maximum opening to avoid breaking the

fasteners and/or keypad.

To remove the tablet/keyboard, always do so with the device at a 90° angle, holding the keyboard

and pulling it up smoothly.

The connecon between tablet/keyboard must always be made with the device at a 90° angle,

docking the device to the keyboard holder. The keyboard holder can only be posioned in one

posion, and the device is aached to it due to its two fasteners and the magnec connectors.

Box content

•

General view of the product

10.

11.

12.

13.

14.

Take the components out of the original box with care. Check all the content of the package to

make sure everything is in there:

ORBYS F21 NEO.

USB cable (type A) <> (type C).

USB power adapter.

Welcome card.

NanoSIM/microSD removal tool.

*Warning: The accessories of this product may change without prior noce.

Keyboard (Oponal).

On/oﬀ buon and screen lock.

Volume buon + (Increase).

Volume buon - (Decrease).

USB type C connector with OTG funcon and charging.

Audio jack for headphones.

Reset buon.

Slot for NanoSIM/MicroSD™.

DC connector 3.5mm for charging.

Electromagnec keyboard connector.

Rear camera.

Front charging LED.

Front camera.

Front brightness sensor.

Speakers.

S/N 138XXX1AU20

Turning on the device

Turning off the device

Unlocking screen

Locking screen

Forced shutdown

Forced restart

When the device is oﬀ, press buon 1 (On/Oﬀ) for a few seconds to start the device.

When the device is on, press buon 1 (On/Oﬀ) for a few seconds so that our device shows the

shutdown opons.

This will be your method of proceeding with the unlocking of the device.

You must pay aenon when seng up and remembering this. If you forget

any of these methods, you will not be able to use the device unless you

reset it. This acon will result in the loss of all data, sengs, applicaons,

etc. The company is not responsible for any losses this process may cause.

These processes will result in the complete cessaon of all running

applicaons and documents. It is not recommended to proceed with these

kind of operaons in order to avoid the loss of data that has not been saved

previously.

Slide up the lock icon to unlock the screen. From this point on, you will need to proceed with the

unlocking method you have set before.

Manually: When your device is switched on, brieﬂy press buon 1 (On/Oﬀ) to lock the screen.

Automacally: You can set your device to lock the screen at a certain me automacally. Justo go

to:

To unlock the screen: You can choose between several methods of screen unlocking (slide,

paern, PIN, password)

You can force the device to turn oﬀ by pressing buon 1 (On/Oﬀ) for more than 10 seconds.

You can force the restart of the device by pressing the buon 6 (you will need the tool to press).

Applicaons > Sengs > Display > Standby me for display

Applicaons > Sengs > Security > Screen Lock

Services of mobile data network

Install nanoSIM card

The device includes 4G/LTE modules for mobile data network operaon. To connect to a mobile

network you will need to insert an acvated SIM card from a compable operator. When acva-

ng mobile data to use data and/or voice services (web browsing, downloads, email, etc.), the

operator may apply fees. Please check your contracted data plan before using the mobile data

feature.

The slot (7) has a single tray to insert nanoSIM and microSD cards. This tray shares the possibilies

of inserng both cards according to the following combinaons:

Insert one nanoSIM.

Insert the removal tool(included) into the small hole in the tray and gently push out the tray.

Take out the tray.

Insert the nanoSIM in the right posion on the tray (one or two depending on whether you want

to use a microSD card). One of the corners determines the correct orientaon.

Replace the tray to the original posion.

The Tablet F21 NEO will request the nanoSIM access code (PIN).

Insert one microSD.

Insert two nanoSIM.

Insert one nanoSIM and one microSD.

Charging the device

Precautions and advices about the charging

•

The device contains a rechargeable Li-ion baery (not removable) which can be charged by

performing the following process:

Connect the USB power adapter to a standard electrical outlet (220V / 50Hz) that you

are sure it is in a good condion.

Plug in the male connector USB-A of the cable into the adapter.

Plug in the male connector USB-C of the cable into port 4 (USB-C) of the device.

The device also has an auxiliary charge port (8) of the DC type 3.5mm. To charge using this port,

a DC 3.5mm 5V 2A charger is required (not included).

The device cannot be charged using both charging ports (4) and (8) at the same me. It could cause

serious damage.

The device does not need to reach 0% (completely discharged baery) to charge it. In fact, to

extend the life of your baery, it is recommended to charge it when the level is between 15% and

30% of its total capacity. By default, your ORBYS F21 NEO will alert you that it needs to be char-

ged when the baery is at 15%.

It is recommended not to drain the baery completely as this may cause the tablet not to turn on.

If your ORBYS F21 NEO is completely discharged, put it on charge and wait about 10 minutes to

start it (to acquire suﬃcient charge). The baery logo will appear on the screen when it is ready.

You can then turn your device on.

The charging me will depend on whether it is charged via a power adapter or via a USB port on

a PC.

The use of non-original power cables or adapters may cause serious damage to the device and

their use may result in the loss of warranty.

The baery is not removable and must not be touched under any circumstances. Any removal or

modiﬁcaon of the baery may result in the loss of the warranty.

The baery level is shown on the main screen of the device with this symbol.

You can monitor the baery usage, view the percentage and acvate the saving opons from the

menu:

It is not recommended to use the device while it is charging. This will cause the charging to be

much slower.

Use only original adapters with the following requirements:

INPUT: AC 100V~240V, 50/60 Hz <> OUTPUT: 5V - 2A

The use of other types of adapters could cause serious damage to the device

and pose risks to people.

Applicaons > Sengs > Baery

Adapter and cable included.

Opening and closing applications

Navigation icons

Connecting the device to a computer

•

You can open any installed applicaon from the main screen or from the Applicaons screen.

Select the icon of the desired applicaon to proceed with its opening.

You can close an applicaon by pressing the Multask buon and dragging the window of the

applicaon to be closed upwards. You can also close all acve applicaons by using the Close All

opon.

There are several icons on the screen that allow us to perform diﬀerent funcons and navigaon:

We can transfer data between our device and a connected computer using the supplied USB

cable.

There are several methods of transferring ﬁles between the PC and the device. You can set the

transfer method from the " Charging this device by USB " noﬁcaon that will appear when you

connect the device to the PC. The main opons to choose from are:

To transfer ﬁles with computers running Mac OSX, you must install Android File

Transfer on your computer. Android File Transfer is compable with Mac OS X

10.7 or later and Android 3.0 or later. It can be obtained from the following URL:

hps://www.android.com/ ﬁletransfer

Transfer ﬁles (MTP): The PC Operang System recognises the device as a Mulmedia Device.

PTP: Picture Transfer Protocol, this protocol is not used oen. The PC Operang System recog-

nises the device as if it were a camera. This mode is only recommended if the user wants to

transfer photos easily as it allows us to pass photos from the device to the computer without the

need to use any addional soware.

Charging: This method cancels the data transfer and thus improves the loading speed.

Return to the previous screen.

Return to the main screen.

This icon indicates that the split screen is acve.

Multasking: Opens a list of thumbnails of the applicaons that are

running. You can access an applicaon by clicking on it or close it by

clicking on the X.

Please note that when you exit an applicaon, for example from the Back buon, the

applicaon may be running in the background and consuming resources (RAM, Baery,

CPU), so it is recommended to close the applicaon completely if you are not going to

use it.

Splitting screen

Opening applications in split-screen

Closing split screen

Your device has a new feature that allows you to use several applicaons at the same me in split

screen.

You must choose which applicaons we want to use in the split screen. To do this, we proceed

with the following way:

Click on the buon to access the list of recently executed applicaons.

Keep pressed on the applicaon you want to run in the split screen. The opons will appear

and if the applicaon is compable with this funconality, "Split screen" will appear.

Once the ﬁrst applicaon has been posioned on the split screen, we can choose the second

applicaon to be run in the remaining window.

While your device is working in Mulscreen, the Multask buon will change and a double

buon will appear to indicate that we are using the split screen.

We can return to work in a single full window by pressing twice the double buon unl only one

applicaon appears.

The ﬁrst applicaon that we have selected will always be running on the selected

screen, however, when we press the double buon again the “applicaon carou-

sel” will be displayed again to open it on the split screen.

You can change the size of each window, just slide the bar that divides them

according to the desired size.

Some applicaons may not be adapted to this funconality. Please consult your

applicaon developer to check for correct compability.

Inhaltsverzeichnis

Andere ORBYS Tablette Handbücher

ORBYS

ORBYS F21 Bedienungsanleitung

Beliebte Tablette Handbücher anderer Marken

Laser

Laser MID-1060 Benutzerhandbuch

MUNBYN

MUNBYN IRT09J Kurzanleitung

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Bedienungsanleitung

Dell

Dell Latitude ST Betriebsanleitung

Lenovo

Lenovo IdeaTab S6000L Betriebsanleitung

Venturer

Venturer WT9L11 Bedienungsanleitung

EDUGEAR

EDUGEAR UnoBook Bedienungsanleitung

Philips

Philips PI3210G/58 Bedienungsanleitung

ADLINK Technology

ADLINK Technology IMT-BT Bedienungsanleitung

TwinMOS

TwinMOS TwinTAB-T102D1 Bedienungsanleitung

Archos

Archos 9.7 xenon Bedienungsanleitung

Getac

Getac E100 Bedienungsanleitung

HANNspree

HANNspree HANNspad SN70T3 Bedienungsanleitung

Philips

Philips PI3105W2/55 Bedienungsanleitung

LG LG-V935 Bedienungsanleitung

Zeki

Zeki TBDB763B Bedienungsanleitung

Ricoh

Ricoh eQuill Bedienungsanleitung

DT Research

DT Research DT365CT Montageanleitung