Oregon Scientific RRM968P Bedienungsanleitung

RADIO-CONTROLLED PROJECTION

CLOCK WITH DIGITAL TUNING

AM/FM RADIO

MODEL NO.: RRM968P/RRM968PU

INSTRUCTION MANUAL

INTRODUCTION

Congratulations on your purchasing the Radio-controlled projection

Clock with digital tuning AM/FM radio RRM968P/RRM968PU.

The unit is a multi-functional radio-controlled clock. The RRM968P

- the Central Europe model - is designed to automatically synchronize

its current time and date when brought within an approximate

1500km radius of the radio signal generated from Frankfurt,

Germany (DCF77). The RRM968PU - the UK model - will do the

same when brought within range of the radio signal MSF-60

generated from Rugby, England.

This unit featured with a projection function that allows the user to

display either (1) the Current Time with Indoor Temperature or (2)

the pre-set Alarm time with Indoor Temperature on the ceiling, wall

orotherflatsurface. In addition, theAlarmstatuswill also be projected,

which is indicated by theAlarm-on icon. The image projected is in a

deep red color which is easily seen in the dark.

This unit also comes with an digital tuning PLL (Phase Lock Loop)

AM/FM radio with 16 user-preset stations (8 forAM and 8 for FM

radio). A Radio Sleep-Timer (auto-off) function is also included.

Other favourable features include EL back-light, indoor temperature

display, hourly-chime function, and user-selectable daily beep alarm

with 8-minute snooze function or Wake-up-to-RadioAlarm.

KEY CONFIGURATION & FEATURES

FRONT VIEW

A1. 3-Line LCD Display

- Displays the time, date, indoor temperature and radio function

RRM968PM_EN_R0 7/7/04, 11:01 AM1

A2. [ ] Battery-low indicator

- Displays when battery power of clock is low

A3. [ ] Battery-low indicator

- Displays when battery power of radio is low

A4. [ ] Radio-reception icon

- Indicates the strength of the reception of clock radio signal

A5. [RADIO] BUTTON

- Press to turn on or off the radio function

A6. [AM/FM] BUTTON

- Press to change between AM or FM radio band (when Radio

is On)

A7. [+ TUNING -] BUTTONS

- Press to increase/ decrease the frequency setting

(when Radio is On)

- Press and hold for 2 seconds to trigger radio auto-search

function (when Radio is On)

A8. [STATION] BUTTON

- Press to switch among the 8 preset stations in the respective

AM or FM radio band (when Radio is On)

- Press and hold for 2 seconds to enter the preset radio station

setting mode (when Radio is On)

A9. [VOL + &VOL -] BUTTONS

- Press to increase / decrease the volume

(when Radio is On)

- Press to increase/ decrease the values in setting modes

- Press and hold for 2 seconds to activate/ deactivate the auto-

reception of RF clock radio signal (When Radio is Off)

TOP VIEW

B1. [SLEEP] BUTTON

- Press to turn on the radio and activate the Sleep Timer function

- Press again to select the time period for the sleep-timer

(auto-off) feature: 15, 30, 60, 90 or 120 minutes

B2. [SNOOZE/ LIGHT] BUTTON

- Press to turn on the EL backlight and projection for 5 seconds

- Press to change the projected image when projection is On

- Press to stop the alarm sound and activate the 8-minute

Snooze function (for Beep alarm only)

B3. [MODE] BUTTON

- Press to toggle among the calendar clock display modes

- Press and hold for 2 seconds to enter the clock setting mode

RRM968PM_EN_R0 7/7/04, 11:01 AM2

SIDE VIEW

C1. [ALARM ON/OFF] BUTTON

- Press to turn on/off the alarm function

C2. [ALARM] BUTTON

- Press to display the alarm function

- Press and hold for 2 seconds to enter the alarm-time setting mode

C3. [PROJECTION ON ] BUTTON

- Slide to enable/disable continuous projection

(when Adapter is connected)

C4. HEADPHONE JACK

PROJECTION UNIT

D1. [180º ROTATION] BUTTON

- Press to flip the projected image horizontally

D2. [FOCUS] KNOB

- Rotate to adjust the focus of projection

D3. [IMAGE ROTATION] KNOB

- Rotate to change the image 90º to the left or right

RRM968PM_EN_R0 7/7/04, 11:01 AM3

BACK VIEW

E1. BATTERY COMPARTMENT

- Accommodates 4 pieces of UM-3 or AA 1.5V batteries (2

pieces for clock function and 2 pieces for radio function)

E2. EXTENDABLEANTENNA

- External antenna for FM radio

E3. [RESET] BUTTON

- Press to return all settings to default values

E4. 4.5 V DC JACK WITH RUBBER COVER

- For AC power adapter installation

BATTERY INSTALLATION

This unit can be operated by batteries or AC power alone as well as

both together.

Using Battery

RRM968PM_EN_R0 7/7/04, 11:01 AM4

Battery Installation:

1. Remove the battery compartment door by rotating it to the

direction of “ ” as shown

2. Insert four pieces of UM-3 or AA 1.5V batteries in accordance

to the polarities.

3. Press [RESET].

4. Replace the battery compartment door by rotating it back onto

the unit by following the direction of “ ”.

When the battery power level is low, the respective low battery

indicator [ ] will light up. Replace the batteries or connect it

with AC power adapter.

Please note if onlyAC adapter is connected and no battery is installed,

low battery indicator [ ] for clock will also light up.

Using AC Power

FEATURES

Section I — Radio-Controlled Calendar

Clock

ABOUT RADIO RECEPTION

After battery installation, the unit will automatically synchronize

its time and date with the radio signal when it is within reception

range of the signal.

When the unit is receiving radio signal, the reception icon will start

to blink. The reception icon will show either strong or weak reception

depending on the strength of the radio signal.A complete reception

generally takes about two to ten minutes.

When the reception is complete the reception icon will stop blinking. The

reception icon will show as “ ”for no reception or “ ” for successful

reception.

The antenna icon indicates the quality of reception.

STRONG

WEAK

NO RECEPTION

IN PROGRESS

RRM968PM_EN_R0 7/7/04, 11:01 AM5

For best reception, place the unit away from other equipment that emit

radio frequency or microwave signals such as TVs, radios, PCs or

microwave ovens. Other causes for signal interference include electrical

power transmission tower and/or steel reinforced concrete construction.

HOW TO ENABLE OR DISABLEAUTO-

RECEPTION

To disable the automatic reception of radio signal, press and hold

[VOL -]for 2 seconds. The reception icon will disappear and the

unit will stop receiving the radio signal.

To activate the signal reception again, press and hold [VOL +]for 2

seconds. The reception icon will appear again and start blinking to

indicate auto reception of radio signal.

DISPLAY MODES SELECTION

Press [MODE] in the normal display mode to scroll through the

calendar clock display modes:

1. Clock with Second

---------------------------

Calendar/Indoor Temperature

2. Clock with Weekday

---------------------------------------------

Calendar/Indoor Temperature

3. Clock with Weekday

----------------------------------------------------------

-Clock (2nd Zone-time)/Indoor Temperature

4. Clock with Weekday(2nd Zone-time)

----------------------------------------------------------

Calendar (2nd Zone-time)/Indoor Temperature

SETTING THE CLOCK AND

CALENDAR MANUALLY

When the automatic radio reception is disabled, the main unit can

be set manually. Set the Clock and Calendar by following the

procedures below:

1. Press and hold [MODE] for 2 seconds. The 2nd Zone-time hour

offset will start flashing.

2. Enter the hour-offset by using [VOL +] or [VOL -]. Press

[MODE] to confirm the entry.

3. Follow the same procedures to set the 12/24-format, hour, minutes,

year, “mm:dd” or “dd:mm” calendar display format, month, day,

display languages and hourly chime on/off mode.

4. Press [MODE] to save the changes and exit the setting mode. If

changes are made after the minute adjustment, the value of

seconds will be reset and start from zero.

5. For the day-of-week you can select among 5 languages —English

RRM968PM_EN_R0 7/7/04, 11:01 AM6

(E), French (F), German (D), Italian (I) and Spanish (S).

DISPLAYINGAND SETTING THE

ALARM

This unit is equipped with a daily alarm. To view the preset alarm

time, press [ALARM].

To set the corresponding alarm time, follow the instructions below:

1. Press and hold [ALARM] for 2 seconds in alarm display mode.

The hours will blink.

2. Enter the hour by using [VOL +] or [VOL -]. Press [ALARM]

to confirm the entry.

3. The Minutes will then blink.

4. Enter the minutes by using [VOL +] or [VOL -]. Press

[ALARM] to confirm the entry.

5. The beep alarm [ ] or radio alarm icon [ ] will blink.

6. Select the alarm-sounding mode by using [VOL +] or [VOL -].

In Beep alarm mode, a 2-minute crescendo alarm will be turned

on when the alarm time is up. In Radio alarm mode, when alarm

time is up, the radio will be turned on and remained on for 2

hours unless it is manually deactivated. Press [ALARM] to

confirm the entry.

7. If Radio alarm mode is being chosen, the radio will be

automatically turned on and the Radio Station Number will flash.

Select the radio station by using [STATION]. Please note that

in this RadioAlarm mode, manual tuning cannot be used to set

the station. Press [ALARM] to confirm the entry.

8. The Volume will then flash. Again, select the radio volume by

Day-of-the-week Affichage du jour Wochentaganzeige

Giorno della settimana

Día de la semana Dia de Semana

Monday

Tuesday Wednesday Thursday

Friday

Saturday

Sunday

Lundi Mardi

Mercredi

Jeudi

Vendredi

Samedi

Dimanche

Montag

Dienstag Mittwoch

Donnerstag

Freitag

Samstag Sonntag

Lunedí

Martedí Mercoledí Glovedí Venerdí

Sabato

Domenica

Lunes Martes

Miércoles Jueves Viernes Sábado Domingo

Segunda Terça Quarta Quinta Sexta Sábado

Domingo

Language

Langues

Sprache

Lingue

Idiomas

Lingua

English

Anglais

Englisch

Inglese

Inglés

Inglês

French

Français

Französisch

Francese

Francés

Francês

German

Allemand

Deutsch

Tedesco

Alemán

Alemão

Italian

Italienisch

Italiano

Italíano

Spanish

Espagnol

Spanisch

Spagnolo

Español

Espanhol

RRM968PM_EN_R0 7/7/04, 11:01 AM7

using [VOL +] or [VOL -]. Press [ALARM] to confirm the

entry and exit the setting mode. Press [RADIO] to turn off the

radio.

When the pre-set time arrives, beep sound / radio will be turned on.

Press any key to stop the beep sound. The EL backlight and projection

will also activate for 5 seconds.

To enable/disable the alarm, press [ALARM ON/OFF ] when the

main unit is in Alarm display mode

When [SNOOZE/LIGHT] is pressed to stop the alarm sound (only

when Beep Alarm mode is selected), the unit will re-alarm again

after 8 minutes. To disable the snooze function, press [ALARM]

or [ALARM ON/OFF ] or press and hold [SNOOZE/LIGHT] for

3 seconds when alarm goes off.

Please note that when Radio is on while Beep Alarm goes off at the

same time, the Radio will be temporarily stopped until the Beep

Alarm has been turned off.

NOTE ON RADIO ALARM

When the RadioAlarm is turned on, the Radio will be turned on for

2 hours. You can intervene by setting the time period for the Sleep

function by pressing [SLEEP] or simply turn off the radio at any

time.

HOURLY CHIME FUNCTION

When the hourly chime function is on, the indication “ ” will

be displayed and a beep sound will be given out at the beginning of

each hour. You can activate or deactivate this function by setting

this in the clock and calendar setting mode (please refer to Section

“SETTING THE CLOCKAND CALENDAR MANUALLY”).

Section II - Digitally-tuned PLLAM/FM

Radio

HOW TO USE THE RADIO

Before you start - All radio functions can only be operated when

Radio is powered on.

To turn on the radio press [RADIO]. The radio will be turned on at

the last preset radio station and volume.

To change the radio frequency, press [AM/FM] to select the radio

band. Then use [+TUNING -] to locate the desired radio frequency.

Press once and the value will advance by 1 step. Press and hold for

2 seconds to enter the Radio Channel auto-search function.

To change the volume, use [VOL +] or [VOL -] to increase or

decrease the volume.There are a total of 16 (0-15) - steps.

To toggle among the programmed stations, press [STATION].

To turn off the radio, press [ RADIO ].

AUTO-SEARCH FUNCTION

The unit is equipped with an Auto-Search function and can

automatically search for the next clear channel. To activate this

function, press and hold [+TUNING -] for 2 seconds and

automatically the value of the frequency will keep increasing or

RRM968PM_EN_R0 7/7/04, 11:01 AM8

decreasing until a clear channel is found. Once this function is

activated, you can release and stop pressing the button.

HOW TO PROGRAM A PRESET

STATION

This unit allows you to program up to 8 FM and 8AM radio stations

in the memory. To do so:

1. First press [AM/FM] to select the AM or FM frequency.

2. Select a station number by pressing [STATION].

3. Locate the desired radio frequency by using [+TUNING -].

4. Press and hold [STATION] for 2 seconds to confirm and exit

the setting mode.

HOW TO USE THE SLEEP (AUTO-OFF)

FUNCTION

With this Sleep function, the radio will be automatically switched

off after a pre-set period of time.

1. To set the sleep function, press [SLEEP]. “0 min” will be

displayed.

2. Press [SLEEP] again to select the period of time (120, 90, 60,

30 or 15 minutes)(when the function is activated the “Sleep”

icon will flash).

3. Wait for about 5 seconds and the sleep function will be activated

automatically.

Section III — Indoor Thermometer

DISPLAY OF INDOOR TEMPERATURE

Once batteries are installed into the main unit, it will start to detect

the indoor temperature and the data will be displayed. The

temperature shown is in degree Celsius (°C). The unit is capable of

measuring temperature within the -5°C and +50°C range. If the

temperature goes above or below that, “HHH” or “LLL” will be

displayed correspondingly.

Section IV — Projection

HOW TO USE THE PROJECTION

The projection makes it easier for you to read the current time or

alarm time with alarm status and indoor temperature at night. To

use the feature,

1. Press [SNOOZE/LIGHT] to turn on the projection for 5

seconds. The current time with alarm status and indoor

temperature will be projected onto the surface the lens is facing.

RRM968PM_EN_R0 7/7/04, 11:01 AM9

2. To change to view the preset alarm time instead of the current

time, press [SNOOZE/LIGHT] again when projection is on.

3. Adjust the projected image as below.

For continuous projection, you must connect it with power adapter.

When the power adapter is connected to the unit, the projection

will be activated and remain so by sliding on the[PROJECTION

ON ]switch.

To deactivate the feature, slide the switch back to its off position.

To increase the life-time of the projection LED, it is suggested to

slide the [ PROJECTION ON ] switch to the “off” position

during daytime.

Section V — Others

BACKLIGHT

To turn on the EL backlight of the LCD Display, press [SNOOZE/

LIGHT] to turn it on for 5 seconds.

HOW TO RESET THE UNIT

Press [RESET] to reset the settings when the unit is malfunctioning

When [RESET] is pressed, all settings will return to the default

values and memory records will be erased.

PRECAUTIONS

This unit is engineered to give you years of satisfactory service if

you handle it carefully. Here are a few precautions.

1. Do not immerse the unit in water. If you spill liquid over it, dry

it immediately with a soft, lint-free cloth.

2. Do not clean the unit with any liquid containing alcohol,

detergent, abrasive or corrosive materials. They may scratch the

plastic parts and corrode the electronic circuit.

3. Do not subject the unit to excessive force, shock, dust,

temperature or humidity, which may result in malfunction,

shorter electronic life span, damaged battery and distorted parts.

Projector Features

Feature Effect Instructions

Adjustable

Projection

Flips an image to

maintain an upright

position

Rotates the

projection 180°

Tilt swivel projection

housing to alter the

direction of projection

FOCUS

Knob Focuses

projection Rotate Dial D2 to focus

projection

IMAGE

ROTATION

KNOB

Dial D3 rotates

projection Rotation of projection

allows user to place

clock in convenient

180°

ROTATION

BUTTON

Button D1

horizontally flips

the projection

180°

RRM968PM_EN_R0 7/7/04, 11:01 AM10

Andere Handbücher für RRM968P

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Oregon Scientific Radiowecker Handbücher

Oregon Scientific

Oregon Scientific RRA320P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM116 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RC05 RCC Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM-112 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Starck PSS03A Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM832A Bedienungsanleitung

Oregon Scientific

Oregon Scientific BARM123A Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM-112A Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM826 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM313PU Bedienungsanleitung

Oregon Scientific

Oregon Scientific EW96 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM913TCN Bedienungsanleitung

Oregon Scientific

Oregon Scientific JM888 Bedienungsanleitung

Oregon Scientific

Oregon Scientific BA200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA G RRM222P Bedienungsanleitung

Oregon Scientific

Oregon Scientific PSS01A Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRA320PN Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRA320P - MANUAL 2 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM902 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM902 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM510 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM968P Bedienungsanleitung

Oregon Scientific

Oregon Scientific EasyPlus EC101 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRA200 Bedienungsanleitung

Beliebte Radiowecker Handbücher anderer Marken

Denver

Denver CRQ-105 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Sony

Sony Dream Machine ICF-C763L Bedienungsanleitung

Sanyo

Sanyo DMP-P6 Bedienungsanleitung

Yamaha

Yamaha ISX-80 Bedienungsanleitung

Pyle

Pyle PLMR20W Bedienungsanleitung

Blaupunkt

Blaupunkt CR7BK Bedienungsanleitung

Philips

Philips AJ3180 Bedienungsanleitung

HoMedics

HoMedics SS-5500-2EU Bedienungsanleitung

RCA

RCA RC66i Bedienungsanleitung

Versaudio

Versaudio Vers Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR8100 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Bedienungsanleitung

Roberts

Roberts ChronoDAB Bedienungsanleitung

AEG

AEG MRC 4132 BT Bedienungsanleitung

Tokai

Tokai TC-155 Bedienungsanleitung

Timex

Timex T300 Bedienungsanleitung