Oregon Scientific JMR868A Bedienungsanleitung

INTRODUCTION

Thank you for selecting the Oregon ScientificTM GENOA

Motion Activated Clock. This device is designed to give

you many years of reliable service, including the

following conveniences:

Atomic Calendar Clock

Temperature Display

Nightlight with Motion Sensor

Sensor or Manual Activated Backlight

US time zone selection

2-Minute Crescendo Alarm

Hourly Chime Function

Day of the Week in 1 of 5 Languages

Wall Mount and Table Stand

Keep this manual handy as you use your new product. It

contains practical step-by-step instructions, as well as

technical specifications and warnings you should know.

CONTENTS

Introduction .......................................................... 1

Key Features - Main Unit ..................................... 2

Front View / LCD Symbols ................................ 2

Back View .......................................................... 2

Table Stand ........................................................ 3

Key Features - Nightlight with

Motion Sensor ...................................................... 3

Front View .......................................................... 3

Back View .......................................................... 3

Safety and Care .................................................... 4

Safety Precautions ............................................. 4

Caring for this Product ....................................... 4

Getting Started ..................................................... 4

How Your Clock Works with

the Nightlight - Overview ................................... 4

Package Contents .............................................. 4

Batteries ............................................................. 4

AC Adaptor ......................................................... 5

About Atomic Clock Reception .......................... 5

Turning the Atomic Clock Reception ON / OFF ....

Clock / Calendar ................................................... 6

Clock / Calendar Display ................................... 6

Setting the Clock / Calendar .............................. 6

Hourly Chime ..................................................... 6

Temperature ....................................................... 6

Alarm ...................................................................... 6

Alarm Display ..................................................... 6

Setting the Alarm ............................................... 6

Activating / Deactivating the Alarm ................... 7

Alarm Sound ...................................................... 7

Turning the Alarm Sound Off ............................. 7

Clock Backlight .................................................... 7

To Manually Turn the Backlight On ................... 7

To Activate the Backlight Using the

Motion / Light Sensor ......................................... 7

To Enable / Disable the

Remote-Controlled Clock Backlight .................. 7

Nightlight ............................................................... 7

Activating the Nightlight Using

the Mode Button ................................................. 7

Activating the Clock Backlight Using

the Control Button .............................................. 8

The Code Switch ................................................ 8

The Channel Switch ........................................... 8

+ Light - Rotary Knob ......................................... 8

Reset Button ...................................................... 8

Technical Specifications ..................................... 9

Troubleshooting ................................................... 10

About Oregon Scientific ...................................... 11

FCC Statement ...................................................... 11

Declaration of Conformity .................................. 11

GENOA Motion Activated Clock

Model: JMR868A / NR868A

USER MANUAL

JMR868A_EN_R6 09/21/2004, 11:081

KEY FEATURES - MAIN UNIT

FRONT VIEW / LCD SYMBOLS

BACK VIEW

1. Channel 1 / 2

Ch.1 or Ch.2 will appear when the related remote

nightlight sensor has been activated.

2. Alarm On Icon

Appears when the alarm is enabled.

3. AL

Appears when you are in the Alarm Display

Mode.

4. Alarm / Calendar (DD / MM)

Shows alarm time.

Shows the date in DD / MM or MM / DD format.

5. Time

HH / MM, 12 / 24 Hour, AM / PM.

6. Atomic Clock Reception Icon

Shows the strength of the reception signal.

7. Start

Start-time for the remotely controlled backlight

by nightlight with motion sensor.

8. Hourly Chime

Appears when the hourly chime is enabled.

9. Stop

Stop-time for the remotely controlled backlight

by nightlight with motion sensor.

10. Battery Low Icon

Appears when the 2 clock batteries are low.

11.Time Zone Offset / Day of the Week

Offsets the atomic time when you are in a

different US time zone.

Name of the day in 1 of 5 languages.

12. Temperature

˚C / ˚F.

13. Light Icon with Battery Low Icon

Appears when the 2 main backlight batteries are

low.

1. Wall Mount Hole

2. Table Stand

3. Battery Compartment

Uses 4 x UM-3 / AA 1.5V batteries.

4. LIGHT button

Press to activate the clock backlight for 5

seconds.

5. MODE button

Press to toggle between 3 clock displays.

Press and hold to enter Clock Setting Mode -

US time zone offset, 12- / 24-hour format, hour,

minute, year, DD / MM or MM / DD format,

month, day, day-of-the-week language and

hourly chime on / off.

6. ARROW UP and ARROW DOWN buttons

Press to increase / decrease the value of a

setting (in any setting mode).

Press and hold to activate / deactivate the atomic

clock reception (in normal Display Mode).

Press to activate / deactivate the alarm function

when the respective alarm is selected.

7. ALARM button

Press to toggle between 3 alarm displays.

Press and hold in the respective Alarm Display

Mode to enter its Setting Mode for the daily

alarm, clock Code for the remote nightlight

sensor or, the remote-controlled backlight start

and stop time.

8. ˚C / ˚F - Temperature

Slide to select between ˚C / ˚F display format.

9. RESET

Press to return all values to the default settings.

LIGHT MODE ALARM C

RESET

LIGHT MODE ALARM C

RESET

JMR868A_EN_R6 09/21/2004, 11:082

BACK VIEWTABLE STAND

The clock can be placed on a table using the table

stand.

1. Rotary Motion Sensor

Detects motion and activates the nightlight and

clock backlight in accordance with the

settings used.

Twist the knob to direct the sensor to the position

you want.

2. Light Sensor

Detects the light intensity of the environment.

3. Light ON

Press to turn the clock backlight ON for 10

seconds remotely.

4. Power - ON / OFF

Slide to the appropriate setting to turn the battery

or AC power ON or OFF.

5. 4.5V Adaptor Socket

6. Light Panel

When activated the panel will light up.

7. LED Indicator

1. Wall Mount Hole

2. Battery Compartment

Uses 3 x UM-3 / AA 1.5V batteries.

3. Channel 1 / 2

Slide to select either Channel 1 or Channel 2.

4. Code switch

Slide to change the Code.

5. Mode - On / Off / Auto

Slide switch to ON - the nightlight will turn on in

a dark room.

Slide switch to OFF - the nightlight is turned off.

Slide switch to AUTO - the nightlight will only be

activated by motion in a dark room.

6. Clock Control - On / Off

Slide switch to ON - when motion is detected,

the clock backlight will be activated.

Slide switch to OFF - the clock backlight will not

be activated by the motion sensor.

7. + Light - Rotary knob

Rotate to adjust the sensitivity of the light sensor.

8. Reset button

Press to reset the nightlight.

KEY FEATURES - NIGHTLIGHT WITH

MOTION SENSOR

FRONT VIEW

JMR868A_EN_R6 09/21/2004, 11:083

SAFETY AND CARE

SAFETY PRECAUTIONS

Please observe the following safety precautions when

setting up and using this product.

LCD panel - The LCD panel is made of glass, and

may break if the unit is dropped.

Heat sources - Keep the product away from heat

sources, such as radiators, stoves, heaters, and

other heat-generating products.

Water and moisture - Do not use the product in or

near water or in high moisture areas, such as a

bathroom.

Power source - The product may be susceptible to

power surges. It should be unplugged during severe

storms or whenever you will be away for a long

time. Only use the type of power source specified

in this manual. Do not overload power strips and

extension cords, as this can cause a fire hazard.

CARING FOR THIS PRODUCT

To ensure you receive the maximum benefit from using

this product, please observe the following guidelines.

Do not clean any part of the product with benzene,

thinner or other solvent chemicals - this may cause

permanent damage that is not covered by the

guarantee. When necessary, clean it with a damp

cloth.

Keep your product away from hot, humid conditions

or strong sunlight.

Every effort has been made to ensure the highest

standards of reliability for your clock with remote

nightlight. However, if something does go wrong,

please do not try to repair it yourself - consult your

supplier.

Do not use your product outdoors in the rain, or

handle it with wet hands - water can damage

electrical equipment.

GETTING STARTED

HOW YOUR CLOCK WORKS WITH THE

NIGHTLIGHT - OVERVIEW

The clock can be set independently to give you

time, calendar and alarm facilities.

The nightlight can be set independently to light up

in the dark so you can see where you are going.

The clock and nightlight can also be used together

to turn the clock backlight on when you walk into a

dark room, or wave your arm from the comfort of

your bed. It can do this because the nightlight has

2 types of sensor. One sensor responds to light

and the other responds to movement. From the

clock unit you can set these sensors to be active

during a certain period of time.

PACKAGE CONTENTS

When you unpack your clock with remote nightlight,

make sure you keep all the packing materials in a safe

place, in case you need to later transport the device or

return it for servicing.

In the box, you will find:

Clock Unit

Remote Nightlight

4 x UM-3 / AA 1.5V Batteries for the Clock

3 x UM-3 / AA 1.5V Batteries for the Nightlight

4.5V AC Adapter

BATTERIES

The clock uses:

4 x UM-3 / AA 1.5V batteries.

The nightlight uses:

3 x UM-3 / AA 1.5V batteries.

NOTE It is recommended that you use alkaline

batteries with this product for longer performance.

To install the batteries, simply insert them making sure

they match the correct polarities (+ and -).

JMR868A_EN_R6 09/21/2004, 11:084

Clock: NOTE The nightlight has a Power ON / OFF switch to

help conserve power. Use the AC adaptor when using

the nightlight for long periods of time. The batteries

are a good power source for back-up usage.

ABOUT ATOMIC CLOCK RECEPTION

This clock can automatically synchronize the date and

time with an official time-keeping organization in

Boulder, Colorado. The unit can pick up an atomic clock

signal when it is within 932 miles (1500 km) of Boulder.

NOTE For best results, place the unit away from metal

or electrical objects, and near a window with a clear

view to the sky.

TURNING THE ATOMIC CLOCK RECEPTION ON / OFF

To turn the atomic clock reception on:

Press and hold the clock button for 2 seconds.

The atomic clock reception icon will appear and

flash on the display to indicate it is searching for

the atomic clock signal.

Once batteries have been installed in the clock, the

reception icon will flash to indicate it is searching for a

signal.

When the reception signal has been received the

reception icon will show the signal strength by

displaying between 0 and 3 waves:

To turn the atomic clock reception off:

Press and hold the button for 2 seconds.

The atomic clock reception icon will disappear from

the display.

Nightlight:

NOTE Replace the batteries whenever the low battery

icon is displayed. Change all the batteries at the

same time - it is dangerous to mix old and new

batteries. Protect your environment by taking

exhausted batteries to authorized disposal stations.

shows on the clock display when the batteries

are low.

The LED indicator on the motion sensor will flash in

red when the batteries are low.

AC ADAPTOR

The 4.5V AC adaptor connects to the nightlight as

shown below.

STRONG

SIGNAL WEAK SIGNAL NO SIGNAL

JMR868A_EN_R6 09/21/2004, 11:085

Calendar /

Clock / Sec

Calendar /

Clock / Day

Calendar / Clock /

Offset Time

CLOCK / CALENDAR

CLOCK / CALENDAR DISPLAY

There are 3 types of clock display:

HOURLY CHIME

The hourly chime function when set to ON will beep

once at the beginning of every hour, and the chime

icon will show on the display.

TEMPERATURE

To choose between ˚C / ˚F, slide the switch up or down

to the setting you want.

The display can show indoor temperatures ranging

from 23˚F to +122˚F (-5˚C to +50˚C).

ALARM

ALARM DISPLAY

There are 3 types of alarm display:

Press the ALARM button to toggle between the 3 types

of display.

Press the MODE button to toggle between the 3 types

of display.

SETTING THE CLOCK / CALENDAR

Before you can manually set the clock and calendar,

you must specify the current time zone you live in and

the time format (12- or 24-hour) as follows:

1. Press and hold the MODE button for 2 seconds.

The time zone offset hour digits will flash. The

default setting of the time zone offset hour is -8,

which stands for Pacific Time. To change to other

U.S. time zones, select the following:

-7 for Mountain Time

-6 for Central Time

-5 for Eastern Time

2. Enter the value by pressing the or buttons.

3. Confirm the entry by pressing the MODE button.

The 12- or 24-hour display format will flash.

4. Repeat (2) and confirm the entry by pressing the

MODE button.

5. Repeat the above procedures to set the hour,

minute, year, MM / DD or DD / MM format, month,

day, day-of-the-week language and hourly chime

(On / Off).

You can select 1 of the 5 following languages:

Daily Alarm /

Clock

Start Time for

Backlight

activated by

Nightlight

Stop Time for

Backlight

activated by

Nightlight

IMPORTANT When you press and hold ALARM for 2

seconds to enter the Setting Mode you need to make

sure you are in the correct alarm display (see above

for reference).

SETTING THE ALARM

To set the alarm:

1. Press and hold the ALARM button for 2 seconds

when the selected alarm is displayed. The hours

will flash.

2. Enter the values by pressing or .

3. Confirm the entry by pressing the ALARM button.

4. The minutes will flash.

5. Repeat (2) and (3) to finish the setting. The alarm

will be activated automatically and the alarm icon

will appear on the display.

SYMBOL LANGUAGE

English

German

French

Italian

Spanish

JMR868A_EN_R6 09/21/2004, 11:086

ACTIVATING / DEACTIVATING THE ALARM

To activate or deactivate the alarm:

1. Press the ALARM button.

2. Press the or button. When the alarm icon

appears on the display, the alarm is activated.

When the alarm icon does not appear on the

display, the alarm is deactivated.

ALARM SOUND

When activated, the alarm icon flashes, the backlight

will come on for 8 seconds and a beeping noise starts

quietly. The alarm gradually becomes louder until it

crescendos at 2 minutes.

TURNING THE ALARM SOUND OFF

To turn the alarm sound off and automatically activate

it again after 24 hours, press any of the following

buttons:

MODE

ALARM

UP

DOWN

CLOCK BACKLIGHT

TO MANUALLY TURN THE BACKLIGHT ON

Press the LIGHT button on the clock, and the backlight

will turn on for 5 seconds.

TO ACTIVATE THE BACKLIGHT USING THE

MOTION / LIGHT SENSOR

The clock backlight can be set up for a certain period

of time to turn on for 10 seconds when a movement is

detected in a dark room. Simply:

1. Press the ALARM button twice to get to the

Backlight Setting Display.

6. The Motion Start Hour will flash.

7. Repeat (4) and (5).

8. Continue the above procedures to set the Motion

Stop Hour.

2. Press the or buttons to change the setting to

either:

NIGHTLIGHT

ACTIVATING THE NIGHTLIGHT USING THE MODE

BUTTON

The nightlight can be activated independently to the

clock unit. You can set the nightlight to the following

options:

1. Nightlight On - When the room is dark the nightlight

will stay on.

Slide the Mode button to On.

2. Nightlight Off - The nightlight stays off all the time.

Slide the Mode button to Off.

3. Nightlight Auto - When the nightlight detects motion

in a dark room, it will light up for 20 seconds.

Slide the Mode button to Auto.

Enabled OR Disabled

9. When the icon appears on the display, the

function is activated. When the icon does not

appear on the display, the function is deactivated.

NOTE Light ON – Press to turn the clock backlight

ON for 10 seconds remotely.

NOTE The nightlight Clock Control switch must be

set to On for this function to work.

TO ENABLE / DISABLE THE REMOTE-CONTROLLED

CLOCK BACKLIGHT

1. Press the ALARM button twice to reach the display

below.

2. Press and hold the ALARM button for 2 seconds

to enter the Backlight Setting Mode.

3. The Code setting will flash.

4. Press the or buttons to change the setting.

(Make sure you select the Code setting that

matches the Code switch in the back of the

nightlight).

5. Confirm the entry by pressing the ALARM button.

JMR868A_EN_R6 09/21/2004, 11:087

NOTE When the motion sensor on the nightlight is

turned on, it needs approximately 2 minutes to warm

up before giving a response.

ACTIVATING THE CLOCK BACKLIGHT USING THE

CONTROL BUTTON

You can control the backlight of the clock through the

nightlight. You can set the backlight to the following

options:

1. Control On - The clock backlight is controlled by

the activation of the nightlight.

Slide the Clock Control switch to On.

2. Control Off - The nightlight does not control the

clock backlight.

Slide the Clock Control switch to Off.

NOTE See the Clock Backlight section, which shows

you how to set the nightlight sensors to be activated at

times specified by you.

THE CODE SWITCH

The Code switch on the nightlight must be set to the

same setting as the Code setting on the clock. The

Code allows the nightlight to recognize the clockís

settings.

THE CHANNEL SWITCH

Up to 2 nightlights can be linked to 1 clock. (An

additional nightlight can be purchased separately.) By

setting 1 nightlight to Channel 1 and the other to

Channel 2, the clock display can tell you which sensor

has been activated by flashing “ch. 1” or “ch.2” on the

display.

RESET BUTTON

Insert a thin blunt instrument into the hole below Reset

to return to the default settings.

The default settings are:

Clock Time: 12.00 PM

Date: 1st January 2004

Time Offset: -8 (Pacific Time)

Alarm Time: 6.00 AM

Daily Alarm: Disabled

Motion Alarm Start Time: 12.00 AM

Motion Alarm Stop Time: 6.00 AM

Motion Alarm: Disabled

Display Setting: 12hr, MM / DD, ˚F

+ LIGHT - ROTARY KNOB

The light sensor’s level of sensitivity can be adjusted.

Turn the Light rotary knob towards + to make it more

sensitive to light or - to make it less sensitive to light.

JMR868A_EN_R6 09/21/2004, 11:088

TECHNICAL SPECIFICATIONS

TYPE DESCRIPTION

Main Unit Dimensions

L x W x H 11.69 x 0.98 x 6.5 inches (297 x 25 x 165 mm)

Weight (without battery) 1.37 lbs (622 g)

Remote Unit Dimensions

L x W x H 3.46 x 1.69 x 4.41 inches (88 x 43 x 112 mm)

Weight (without battery) 0.31 lbs (140 g)

Temperature

Unit ˚C / ˚F

Operating Range 32˚F to +122˚F (0˚C to +50˚C)

Indoor Range 23˚F to +122˚F (-5˚C to +50˚C)

Resolution 0.2˚F (0.1˚C)

Main Unit Atomic Clock

Atomic Clock Frequency System WWVB-60

Atomic Clock Synchronization Auto or disabled

RF Frequency 433 MHz

Reception Range 100 feet (30 meters) with no obstructions

Synchronization Auto or disabled

Remote Unit

Motion Sensor Coverage Distance Approx. 16 feet (5 meters)

Motion Sensor Warm-Up Time Approx. 2 minutes after power-on

Main Unit Display

Clock HH:MM:SS

HH:MM:Day of Week

HH:MM:Time Zone Offset

Hour Format 12hr AM / PM or 24hr

Calendar DD / MM or MM / DD, user selectable. Weekday

selection in 5 languages (E, D, F, I, S)

Alarm 2-minute crescendo

Power

Main Unit 4 x UM-3 (AA) 1.5V batteries

Remote Unit 3 x UM-3 (AA) 1.5V batteries or 4.5V AC adaptor

NOTE Design and specifications are subject to change without notice.

NOTE It is recommended that you use alkaline batteries with this product for longer performance.

JMR868A_EN_R6 09/21/2004, 11:089

TROUBLESHOOTING

PROBLEM SYMPTOM REMEDY

Clock time is not

correctly set

No atomic clock reception Place the main unit far away from PCs,

phones, and other electronic equipment

and near a windowsill. Wait for at least

24 hours

No alarm Alarm does not sound Turn on the alarm setting

Operation not normal Certain functions do not

perform

Reset the main unit and the

remote nightlight

Calendar Strange day Check it is set to your own

language

Clock Cannot change clock Disable the atomic clock signal and set

the clock manually

Clock / calendar Cannot auto-synchronize the

clock 1. Adjust batteries

2. Press Reset on the main unit

Temperature Shows “LLL” or “HHH” Temperature is out of range

Remote nightlight Does not activate the clock

backlight

1. Adjust batteries / AC adaptor

2. Check Control Clock switch, is set

to On

3. Check the Code switch on the

nightlight matches the main unit Code

display

JMR868A_EN_R6 09/21/2004, 11:0810

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Oregon Scientific Uhr Handbücher

Oregon Scientific

Oregon Scientific RM868PA Bedienungsanleitung

Oregon Scientific

Oregon Scientific JM889NA Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA B Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM331P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM313PA Bedienungsanleitung

Oregon Scientific

Oregon Scientific DP100 Bedienungsanleitung

Oregon Scientific

Oregon Scientific TW369 Bedienungsanleitung

Oregon Scientific

Oregon Scientific BAR339P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM902 Bedienungsanleitung

Oregon Scientific

Oregon Scientific BAR339PA Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM902 Bedienungsanleitung

Oregon Scientific

Oregon Scientific POLERMO RMR939PA Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM868P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RRM968P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RA313P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM330P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM826A Bedienungsanleitung

Oregon Scientific

Oregon Scientific TR119 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR612HGA Bedienungsanleitung

Oregon Scientific

Oregon Scientific Glaze JW208 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM313P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMB899P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM912TCN Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM318PU Bedienungsanleitung

Beliebte Uhr Handbücher anderer Marken

Silicon Laboratories

Silicon Laboratories SI5324 Bedienungsanleitung

Heathkit

Heathkit GC-1005 Bedienungsanleitung

Andrew O'Malley

Andrew O'Malley DOTKLOK Bedienungsanleitung

ALGE-Timing

ALGE-Timing ASC3 Bedienungsanleitung

Bodet

Bodet Profil 960 Bedienungsanleitung

Nixie Clock

Nixie Clock Divergence Meter Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8256-AL Bedienungsanleitung

Mini Gadgets

Mini Gadgets MCPro Bedienungsanleitung

Casio

Casio TMR-200 Bedienungsanleitung

Progetti

Progetti ILTEMPOSTRINGE Handbuch

BVItech

BVItech BV-101 Bedienungsanleitung

Progetti

Progetti KALIMERO Handbuch

La Crosse Technology

La Crosse Technology WT-3141b Handbuch

La Crosse Technology

La Crosse Technology W86531 Bedienungsanleitung

Sharp

Sharp SPC900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 404-50447 Bedienungsanleitung

Datexx

Datexx DF0063 Bedienungsanleitung

LG LEC-005 Bedienungsanleitung