Oregon Scientific RESONANCE CIR600 Bedienungsanleitung

RESONANCE

Clock Speaker

Model: CIR600

User Manual

Thank you for selecting the Oregon ScienticTM RESONANCE Clock

Speaker (CIR600).

NOTE

Please keep this manual handy as you use your new product.

It contains practical step-by-step instructions, as well as technical

specications and warning you should know about.

PACKAGE CONTENTS

• Main unit x 1

• CR2025 battery x 1

• AC/DC Power adapter x1

• User manual x 1

OVERVIEW

MAIN UNIT

1234 5

7891011

CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 1

2017/10/25 下午2:23

1. Volume up; Increase a value in setting mode.

2. Volume down; Decrease a value in setting mode;

3. Set the alarm; Activate/Cancel the alarm;

4. Activate Bluetooth pairing mode; Toggle between Bluetooth and

Aux in audio mode.

5. Toggle display mode between time and calendar;

Set the time/calendar.

6. SNOOZE Snooze the alarm; Dimmer

7. DC 12 V, 2.0 A jack Connect AC/DC adapter.

8. 5 V, 1A USB port Charge smart device;

9. Aux in Connect to external audio source.

10. RESET Returns all settings to factory defaults.

11. Battery compartment: for back-up power source.

LCD DISPLAY

A. Time / Calendar display.

B. Second / Weekday display.

Symbol Description

Low battery indicator

Alarm indicator

Bluetooth icon

Aux in

POWER YOUR CLOCK

INSTALL BATTERY

The device comes with a back-up battery installed. Remove the plastic tab

before using the clock. Replace the battery when displays.

1. Screw off the battery compartment cover.

2. Insert a new CR2025 3 V battery, positive (+) side up, and replace the

battery compartment cover.

3. Press RESET.

NOTE

• Keep button-cell battery away from children. Swallowing a button-cell

battery can be fatal.

CONNECT POWER ADAPTER

Connect the supplied AC/DC power adapter to the DC 12 V, 2.0 A jack on

the rear of the unit and plug into a standard outlet.

NOTE

• The battery is only for back-up use. Always connect the unit to the

power grid source via power adapter.

• When the clock is connected to AC power source, it can charge your

smart device via the USB port.

• Make sure the adapter is not obstructed and is easily accessible to

the unit.

• To completely disconnect from power, unplug adapter from the mains.

SET THE CLOCK TIME

1. Press and hold for 3 seconds to enter the clock time setting mode.

2. Press or repeatedly to adjust settings; press and hold or

to quickly setting.

3. Press to conrm and go to the next setting.

• The setting order is 12/24 hour format > Hour > Minute > Year >

Calendar format (MD/DM) > Month > Day > Weekday language.

CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 2

2017/10/25 下午2:23

1. Volume up; Increase a value in setting mode.

2. Volume down; Decrease a value in setting mode;

3. Set the alarm; Activate/Cancel the alarm;

4. Activate Bluetooth pairing mode; Toggle between Bluetooth and

Aux in audio mode.

5. Toggle display mode between time and calendar;

Set the time/calendar.

6. SNOOZE Snooze the alarm; Dimmer

7. DC 12 V, 2.0 A jack Connect AC/DC adapter.

8. 5 V, 1A USB port Charge smart device; Firmware update.

9. Aux in Connect to external audio source.

10. RESET Returns all settings to factory defaults.

11. Battery compartment: for back-up power source.

LCD DISPLAY

A. Time / Calendar display.

B. Second / Weekday display.

Symbol Description

Low battery indicator

Alarm indicator

Bluetooth icon

Aux in

POWER YOUR CLOCK

INSTALL BATTERY

The device comes with a back-up battery installed. Remove the plastic tab

before using the clock. Replace the battery when displays.

1. Screw off the battery compartment cover.

2. Insert a new CR2025 3 V battery, positive (+) side up, and replace the

battery compartment cover.

3. Press RESET.

NOTE

• Keep button-cell battery away from children. Swallowing a button-cell

battery can be fatal.

CONNECT POWER ADAPTER

Connect the supplied AC/DC power adapter to the DC 12 V, 2.0 A jack on

the rear of the unit and plug into a standard outlet.

NOTE

• The battery is only for back-up use. Always connect the unit to the

power grid source via power adapter.

• When the clock is connected to AC power source, it can charge your

smart device via the USB port.

• Make sure the adapter is not obstructed and is easily accessible to

the unit.

• To completely disconnect from power, unplug adapter from the mains.

SET THE CLOCK TIME

1. Press and hold for 3 seconds to enter the clock time setting mode.

2. Press or repeatedly to adjust settings; press and hold or

to quickly setting.

3. Press to conrm and go to the next setting.

• The setting order is 12/24 hour format > Hour > Minute > Year >

Calendar format (MD/DM) > Month > Day > Weekday language.

CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 3

2017/10/25 下午2:23

• Complete each step with 60 seconds or the device will exit the clock

setting mode.

• The language options are English (EN), German (GER), French (FR),

Italian (IT) and Spanish (SP).

ALARM

SETTING THE ALARMS

1. Press and hold for 2 seconds to enter alarm setting mode. The time

digits ash.

2. Press or repeatedly to adjust settings; press and hold or

to quickly setting.

3. Press to conrm and go to the next setting.

ACTIVATING / DEACTIVATING THE ALARM

Press accordingly for desired option:

Time pressing Alarm on/off Operation

1Alarm 1 on Set Alarm 1

2Alarm 2 on Set Alarm 2

3Both alarms

on Set Alarm 1 and 2

4Both alarms off Turn off Alarm 1 and 2

Press and together to review Alarm 1 time.

Press and together to review alarm 2 time.

SNOOZE / STOP THE ALARM

• Press SNOOZE to stop the alarm for 8 minutes. The alarm indicator will

ash.

• Press to cancel snooze function during snooze status.

• When the alarm sounds, press any key except SNOOZE to stop the

alarm. The alarm will reactivate the next scheduled alarm time unless

deactivated.

DIMMER

Turn off all the alarms, press SNOOZE to adjust the backlight:

normal mid dim

BLUETOOTH PAIRING

1. Turn on Bluetooth on your smart device.

2. Open the Bluetooth pairing list on your smart device and select to

connect CIR600. The Bluetooth icon displays steady.

3. If pairing failure, press and hold on the unit for 2 seconds

to enter the Bluetooth pairing mode. The Bluetooth icon ashes and

re-pair.

NOTE

• If the unit is not connected to a device within 5 mintues, the Bluetooth

will automatically turn off.

• To disconnect the unit from your smart device, disconnect it in the

Bluetooth menu of your device.

• Bluetooth wireless technology operates within 10 meters (33 ft) range

and varies if there are physical obstacles, such as a thick wall in

between your smart device and CIR600.

LISTEN TO THE MUSIC

1. Press to select BT or Aux in music.

2. Press or to control sound volume, max volume is 16.

3. Press and hold for 3 seconds to mute, volume is 0.

CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 4

2017/10/25 下午2:23

• Complete each step with 60 seconds or the device will exit the clock

setting mode.

• The language options are English (EN), German (GER), French (FR),

Italian (IT) and Spanish (SP).

ALARM

SETTING THE ALARMS

1. Press and hold for 2 seconds to enter alarm setting mode. The time

digits ash.

2. Press or repeatedly to adjust settings; press and hold or

to quickly setting.

3. Press to conrm and go to the next setting.

ACTIVATING / DEACTIVATING THE ALARM

Press accordingly for desired option:

Time pressing Alarm on/off Operation

1Alarm 1 on Set Alarm 1

2Alarm 2 on Set Alarm 2

3Both alarms

on Set Alarm 1 and 2

4Both alarms off Turn off Alarm 1 and 2

Press and together to review Alarm 1 time.

Press and together to review alarm 2 time.

SNOOZE / STOP THE ALARM

• Press SNOOZE to stop the alarm for 8 minutes. The alarm indicator will

ash.

• Press to cancel snooze function during snooze status.

• When the alarm sounds, press any key except SNOOZE to stop the

alarm. The alarm will reactivate the next scheduled alarm time unless

deactivated.

DIMMER

Turn off all the alarms, press SNOOZE to adjust the backlight:

normal mid dim

BLUETOOTH PAIRING

1. Turn on Bluetooth on your smart device.

2. Open the Bluetooth pairing list on your smart device and select to

connect CIR600. The Bluetooth icon displays steady.

3. If pairing failure, press and hold on the unit for 2 seconds

to enter the Bluetooth pairing mode. The Bluetooth icon ashes and

re-pair.

NOTE

• If the unit is not connected to a device within 5 mintues, the Bluetooth

will automatically turn off.

• To disconnect the unit from your smart device, disconnect it in the

Bluetooth menu of your device.

• Bluetooth wireless technology operates within 10 meters (33 ft) range

and varies if there are physical obstacles, such as a thick wall in

between your smart device and CIR600.

LISTEN TO THE MUSIC

1. Press to select BT or Aux in music.

2. Press or to control sound volume, max volume is 16.

3. Press and hold for 3 seconds to mute, volume is 0.

CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 5

2017/10/25 下午2:23

LISTEN TO AN EXTERNAL AUDIO SOURCE

1. Use a 1/8 (3.5 mm) audio cable (not supplied) to connect the audio

source’s headphone jack to the Aux in jack on your unit.

2. Press to enter AUX IN mode.

3. Use the controls on your connected device to play.

SPECIFICATIONS

Input power 12 V, 2.0 A AC/DC power adapter

Output power 2 x 10 W RMS

USB charging output port 5 V, 1 A

Battery CR2025 (for back-up source)

Bluetooth Version 4.0

L x W x H 200 x 89 x 72.9 mm

(7.9 x 3.5 x 2.9 in)

Weight 628g (1.4 lb)

PRECAUTIONS

• Use only fresh battery of the required size and type.

• Do not dispose old batteries as unsorted municipal waste. Collection of

such waste separately for special treatment is necessary.

• If you do not plan to use the unit for a long time, remove the battery.

Battery can leak chemicals that can damage electronic parts.

• Do not subject the device to excessive force, shock, dust, temperature

or humidity.

• Do not immerse the device in water. If you spill liquid over it, dry it

immediately with a soft, lint-free cloth.

• Do not clean the device with abrasive or corrosive materials.

• Do not tamper with the device’s internal components. Doing so

invalidates the warranty.

• Images shown in this manual may differ from the actual display.

• When disposing of this product, ensure it is collected separately for

special treatment.

• The contents of this manual may not be reproduced without the

permission of the manufacturer.

NOTE

The technical specications for this product and the contents of

the user manual are subject to change without notice.

NOTE

Features and accessories will not be available in all countries.

For more information, please contact your local retailer. To download an

electronic version of the user manual, please visit

http://global.oregonscientic.com/customerSupport.php.

ABOUT OREGON SCIENTIFIC

Visit our website www.oregonscientic.com to learn more about Oregon

Scientic products.

For any inquiry, please contact our Customer Services at

info@oregonscientic.com.

Oregon Scientic Global Distribution Limited reserves the right to interpret

and construe any contents, terms and provisions in this user manual and

to amend it, at its sole discretion, at any time without prior notice. To the

extent that there is any inconsistency between the English version and

any other language versions, the English version shall prevail.

EU-DECLARATION OF CONFORMITY

Hereby the manufacturer, IDT Technology Limited, declares that the

radio equipment type RESONANCE Clock Speaker (Model: CIR600)

is in compliance with 2014/53/EU Directive. The full text of the EU

Declaration of Conformity is available at the following internet address:

www.oregonscientic.com.

COUNTRIES RED APPROVED COMPLIED

All EU countries, Switzerland

and Norway

CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 6

2017/10/25 下午2:23

LISTEN TO AN EXTERNAL AUDIO SOURCE

1. Use a 1/8 (3.5 mm) audio cable (not supplied) to connect the audio

source’s headphone jack to the Aux in jack on your unit.

2. Press to enter AUX IN mode.

3. Use the controls on your connected device to play.

SPECIFICATIONS

Input power 12 V, 2.0 A AC/DC power adapter

Output power 2 x 10 W RMS

USB charging output port 5 V, 1 A

Battery CR2025 (for back-up source)

Bluetooth Version 4.0

L x W x H 200 x 89 x 72.9 mm

(7.9 x 3.5 x 2.9 in)

Weight 628g (1.4 lb)

PRECAUTIONS

• Use only fresh battery of the required size and type.

• Do not dispose old batteries as unsorted municipal waste. Collection of

such waste separately for special treatment is necessary.

• If you do not plan to use the unit for a long time, remove the battery.

Battery can leak chemicals that can damage electronic parts.

• Do not subject the device to excessive force, shock, dust, temperature

or humidity.

• Do not immerse the device in water. If you spill liquid over it, dry it

immediately with a soft, lint-free cloth.

• Do not clean the device with abrasive or corrosive materials.

• Do not tamper with the device’s internal components. Doing so

invalidates the warranty.

• Images shown in this manual may differ from the actual display.

• When disposing of this product, ensure it is collected separately for

special treatment.

• The contents of this manual may not be reproduced without the

permission of the manufacturer.

NOTE The technical specications for this product and the contents of

the user manual are subject to change without notice.

NOTE Features and accessories will not be available in all countries.

For more information, please contact your local retailer. To download an

electronic version of the user manual, please visit

http://global.oregonscientic.com/customerSupport.php.

ABOUT OREGON SCIENTIFIC

Visit our website www.oregonscientic.com to learn more about Oregon

Scientic products.

For any inquiry, please contact our Customer Services at

info@oregonscientic.com.

Oregon Scientic Global Distribution Limited reserves the right to interpret

and construe any contents, terms and provisions in this user manual and

to amend it, at its sole discretion, at any time without prior notice. To the

extent that there is any inconsistency between the English version and

any other language versions, the English version shall prevail.

EU-DECLARATION OF CONFORMITY

Hereby the manufacturer, IDT Technology Limited, declares that the

radio equipment type RESONANCE Clock Speaker (Model: CIR600)

is in compliance with 2014/53/EU Directive. The full text of the EU

Declaration of Conformity is available at the following internet address:

www.oregonscientic.com.

COUNTRIES RED APPROVED COMPLIED

All EU countries, Switzerland

and Norway

CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 7

2017/10/25 下午2:23

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation.

WARNING

Changes or modications to this unit not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

NOTE This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for support or

sales. Please call our customer service number (listed on our website

at www.oregonscientic.com), or on the warranty card for this product)

for all inquiries instead.

Name: Oregon Scientic, Inc.

Address: Brea Corporate Park

3020 Saturn St. Suite 200

Brea, CA 92821

Telephone No.: 1-800-853-8883

declare that the product

Product No. CIR600

Product Name: RESONANCE Clock Speaker

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1, 41 Man Yue St.,

Hung Hom, Kowloon,

Hong Kong

INFORMATION FOR USERS

Pursuant to and in accordance with Article 14 of the Directive

2012/19/EU of the European Parliament on waste electrical

and electronic equipment (WEEE), and pursuant to and in

accordance with Article 20 of the Directive 2013/56/EU of

the European Parliament on batteries and accumulators and waste

batteries.

The barred symbol of the rubbish bin shown on the equipment indicates

that, at the end of its useful life, the product must be collected separately

from other waste.

Please note that the batteries/rechargeable batteries must be removed

from the equipment before it is given as waste. To remove the batteries/

accumulators refer to the specications in the user manual. Therefore,

any products that have reached the end of their useful life must be given

to waste disposal centers specializing in separate collection of waste

electrical and electronic equipment, or given back to the dealer when

purchasing a new WEEE, pursuant to and in accordance with Article 14 as

implemented in the country.

The adequate separate collection for the subsequent start-up of the

equipment sent to be recycled, treated and disposal of in an environmentally

compatible way contributes to preventing possible negative effects on

the environment and health and optimizes the recycling and reuse of

components making up the apparatus.Abusive disposal of the product by

the user involves application of the administrative sanctions according to

the laws in force.

CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 8

2017/10/25 下午2:23

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation.

WARNING

Changes or modications to this unit not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

NOTE

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for support or

sales. Please call our customer service number (listed on our website

at www.oregonscientic.com), or on the warranty card for this product)

for all inquiries instead.

Name: Oregon Scientic, Inc.

Address: Brea Corporate Park

3020 Saturn St. Suite 200

Brea, CA 92821

Telephone No.: 1-800-853-8883

declare that the product

Product No. CIR600

Product Name: RESONANCE Clock Speaker

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1, 41 Man Yue St.,

Hung Hom, Kowloon,

Hong Kong

INFORMATION FOR USERS

Pursuant to and in accordance with Article 14 of the Directive

2012/19/EU of the European Parliament on waste electrical

and electronic equipment (WEEE), and pursuant to and in

accordance with Article 20 of the Directive 2013/56/EU of

the European Parliament on batteries and accumulators and waste

batteries.

The barred symbol of the rubbish bin shown on the equipment indicates

that, at the end of its useful life, the product must be collected separately

from other waste.

Please note that the batteries/rechargeable batteries must be removed

from the equipment before it is given as waste. To remove the batteries/

accumulators refer to the specications in the user manual. Therefore,

any products that have reached the end of their useful life must be given

to waste disposal centers specializing in separate collection of waste

electrical and electronic equipment, or given back to the dealer when

purchasing a new WEEE, pursuant to and in accordance with Article 14 as

implemented in the country.

The adequate separate collection for the subsequent start-up of the

equipment sent to be recycled, treated and disposal of in an environmentally

compatible way contributes to preventing possible negative effects on

the environment and health and optimizes the recycling and reuse of

components making up the apparatus.Abusive disposal of the product by

the user involves application of the administrative sanctions according to

the laws in force.

CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 9

2017/10/25 下午2:23

WARNING

Do not ingest the battery, Chemical Burn Hazard(The remote control

supplid with) This product contains a coin/button cell battery. if the coin/

button cell battery is swallowed, it can cause severe internal burns in just

2 hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product

and keep it away from children.

If you think batteries might have been swallowed or placed inside any part

of the body, seek immediate medical attention.

CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 10

2017/10/25 下午2:23

Andere Handbücher für RESONANCE CIR600

Inhaltsverzeichnis

Andere Oregon Scientific Uhr Handbücher

Oregon Scientific

Oregon Scientific DP200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific BAR332ES Bedienungsanleitung

Oregon Scientific

Oregon Scientific BAR339PA Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM338P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR939P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMB899P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM912TH Bedienungsanleitung

Oregon Scientific

Oregon Scientific FAT101 Indianapolis Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM826 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Slim Projection Clock RA368P Bedienungsanleitung

Oregon Scientific

Oregon Scientific IWA-80055 Bedienungsanleitung

Oregon Scientific

Oregon Scientific TW221 Bedienungsanleitung

Oregon Scientific

Oregon Scientific POLERMO RMR939PA Bedienungsanleitung

Oregon Scientific

Oregon Scientific DP200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM338P Bedienungsanleitung

Oregon Scientific

Oregon Scientific DP100 Bedienungsanleitung

Oregon Scientific

Oregon Scientific TimeSphere RM382P Bedienungsanleitung

Oregon Scientific

Oregon Scientific JM889NA Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM309P Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA G Bedienungsanleitung

Oregon Scientific

Oregon Scientific BAR339P Bedienungsanleitung

Oregon Scientific

Oregon Scientific RM822 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Jumbo JMR828A Bedienungsanleitung

Oregon Scientific

Oregon Scientific WS902 Bedienungsanleitung

Beliebte Uhr Handbücher anderer Marken

Silicon Laboratories

Silicon Laboratories SI5324 Bedienungsanleitung

Heathkit

Heathkit GC-1005 Bedienungsanleitung

Andrew O'Malley

Andrew O'Malley DOTKLOK Bedienungsanleitung

ALGE-Timing

ALGE-Timing ASC3 Bedienungsanleitung

Bodet

Bodet Profil 960 Bedienungsanleitung

Nixie Clock

Nixie Clock Divergence Meter Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8256-AL Bedienungsanleitung

Mini Gadgets

Mini Gadgets MCPro Bedienungsanleitung

Casio

Casio TMR-200 Bedienungsanleitung

Progetti

Progetti ILTEMPOSTRINGE Handbuch

BVItech

BVItech BV-101 Bedienungsanleitung

Progetti

Progetti KALIMERO Handbuch

La Crosse Technology

La Crosse Technology WT-3141b Handbuch

La Crosse Technology

La Crosse Technology W86531 Bedienungsanleitung

Sharp

Sharp SPC900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 404-50447 Bedienungsanleitung

Datexx

Datexx DF0063 Bedienungsanleitung

LG LEC-005 Bedienungsanleitung