Oregon Scientific RMR383HG Bedienungsanleitung

Digital Thermometer with Humidity, Ice

Alert and Radio-controlled Clock

Model: RMR383HG

USER MANUAL

CONTENTS

Introduction............................................................... 2

Clock Overview......................................................... 2

Front View................................................................ 2

Back View................................................................ 3

LCD Display............................................................. 4

Remote Sensor (THN132N) .................................... 5

Getting Started.......................................................... 5

Batteries................................................................... 5

Remote Sensor ......................................................... 5

Sensor Data Transmission....................................... 7

Clock ......................................................................... 7

Clock Reception....................................................... 7

Reception Signal ..................................................... 7

Set Clock ................................................................. 7

Alarm ......................................................................... 8

Temperature and Humidity ...................................... 8

Temperature and Humidity Trend ............................ 9

Ice Warning ............................................................. 9

Hi / Lo Temperature / Humidity Alarm...................... 9

Heat Index ................................................................. 9

Comfort Zone.......................................................... 10

Moon Phase ............................................................ 10

Reset........................................................................ 11

Precautions............................................................. 11

Specications ......................................................... 11

About Oregon Scientic ........................................ 12

EU-Declaration Of Conformity............................... 12

RMR383HG_M_EN_op1.indd 1 15-9-24 ��2:13

INTRODUCTION

Thank you for selecting this Oregon ScienticTM Digital

Thermometer with Humidity, Ice Alert and Radio-

controlled Clock (RMR383HG). This clock is supplied

with a remote sensor (THN132N) and can support up to

3 sensors in total (additional sensors sold separately).

NOTE Please keep this manual handy as you use

your new product. It contains practical step-by-step

instructions, as well as technical specifications and

warnings you should know about.

CLOCK OVERVIEW

FRONT VIEW

1. SNOOZE

2. Temperature and Humidity Area

3. Clock / Alarm Area

4. : View alarm status; set alarm

RMR383HG_M_EN_op1.indd 2 15-9-24 ��2:13

BACK VIEW

1. / :Increase / decrease setting; activate /

deactivate clock reception signal

2. MODE: Change settings / display

3. CHANNEL: Switch remote sensor display

4. MEM: View current, maximum and minimum

temperature / humidity

5. °C / °F: Select temperature unit

6. HEAT INDEX

7. TEMP / HUMIDITY HI / LO : Change settings

or enable / disable hi or lo temperature / humidity

alarm

8. RESET: Reset unit to default settings

9. EU / UK switch

10. Battery compartment

RMR383HG_M_EN_op1.indd 3 15-9-24 ��2:13

LCD DISPLAY

Clock / Alarm area:

1. Clock signal reception

2. AM / PM mode selected

3. Alarm mode

4. Alarm set

5. AM / PM mode selected

6. Alarm time

7. Clock

8. Moon phase

Temperature and Humidity area:

1. Heat index icon

2. Hi / lo temperature alarm

3. Max / min temperature icon

4. Sensor reception icon

5. Comfort Zone

6. Battery low icon

7. Hi / lo humidity alarm

8. Max / min humidity icon

9. Ice warning is active

10. Temperature trend

11. Temperature

12. Heat Index warning

13. Humidity trend

14. Humidity

RMR383HG_M_EN_op1.indd 4 15-9-24 ��2:13

REMOTE SENSOR (THN132N)

1. LED indicator 1. Wall mount

2. Battery compartment

3. Battery door

4. Table stand

5. RESET

6. CHANNEL switch

GETTING STARTED

BATTERIES

Insert batteries before first use, matching the polarity

(+ and -). Press RESET after each battery change.

indicates main unit batteries are low.

NOTE Do not use rechargeable batteries. We

recommend that you use alkaline batteries with this

product for longer usage and lithium batteries in

temperatures below freezing.

REMOTE SENSOR

The sensor collects temperature readings approx. every

40 seconds and sends them to the main unit. The main

unit can collect data from up to 3 sensors.

RMR383HG_M_EN_op1.indd 5 15-9-24 ��2:13

To set up the sensor:

1. Slide open the battery door.

2. Insert the batteries, matching the polarity (+ / -).

Press RESET after each battery change.

3. Select a channel. Make sure you use a different

channel for each sensor.

4. Close the battery compartment.

5. Secure the sensor in the desired location using the

wall mount or table stand.

For best results:

• Place the sensor out of direct sunlight and

moisture.

• Do not place the sensor more than 30 m (100 ft) from

the main (indoor) unit.

• Position the sensor so that it faces the main (indoor)

unit, minimizing obstructions such as doors, walls,

and furniture.

• Place the sensor in a location with a clear view to

the sky, away from metallic or electronic objects.

• Position the sensor close to the main unit during

cold winter months as below-freezing temperatures

may affect battery performance and signal

transmission.

The transmission range may vary depending on many

factors. You may need to experiment with various

locations to get the best results.

Standard Alkaline batteries contain signicant amounts of

water. Because of this they will freeze in low temperatures

of approximately -12°C (10°F). Disposable Lithium batteries

have a much lower threshold for temperature with an

estimated freezing range of below -30°C (-22°F).

Wireless ranges can be impacted by a variety of factors

such as extremely cold temperatures. Extreme cold

may temporarily reduce the effective range between the

sensor and the base station. If the unit’s performance

fails due to low temperature, the unit will resume proper

functioning as the temperature rises to within the normal

temperature range (i.e. no permanent damage will occur

to the unit due to low temperatures).

RMR383HG_M_EN_op1.indd 6 15-9-24 ��2:13

SENSOR DATA TRANSMISSION

The sensor reception icon in the temperature and

humidity area shows the status.

ICON DESCRIPTION

Main unit is searching for the

sensor(s)

A channel has been found

and sensor signal is being

received

and “- - . -“ The sensor cannot be found.

(Temperature Search for the sensor or

and Humidity Area) check batteries

To search for a sensor:

Simultaneously, press and hold MEM and CHANNEL

for 2 seconds.

NOTE If the sensor is still not found, check the batteries,

obstructions, and remote unit location.

RECEPTION SIGNAL

Clock signal reception indicator:

STRONG SIGNAL WEAK SIGNAL NO SIGNAL

To enable and force a signal search:

Press and hold for 2 seconds.

To disable the signal reception:

Press and hold for 2 seconds.

SET CLOCK

If the clock signal reception is enabled and a signal is

being received the clock does not need to be manually

set.

To manually set the clock:

1. Press and hold MODE for 2 seconds.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its date and time

automatically once it is within range of :

• DCF77 generated from Frankfurt, Germany for

Central Europe.

• MSF60 generated from Rugby, England.

The clock collects the radio signals whenever it is within

1500 km (932 miles) of a signal.

NOTE Slide the EU / UK switch to appropriate position

for your location. Repeat each time you reset the unit.

NOTE Initial reception takes 2-10 minutes for rst set

up or when RESET is pressed. Once complete, the

reception icon will stop blinking. If the signal is weak, it

can take up to 24 hours to get a valid signal.

RMR383HG_M_EN_op1.indd 7 15-9-24 ��2:13

2. Press and to change the settings.

3. Press MODE to conrm.

4. The setting sequence is: time zone offset, 12/24 hour

format, hour, minute, year, month, date, and display

language.

NOTE The time zone offset can be used to set the

clock up to + / - 9 hours from the received clock signal

time. If you have disabled the clock signal reception (i.e.

manually setting the clock), do not set a value for time

zone offset.

NOTE The language options are English (E), German

(D), French (F), Italian (I), and Spanish (S).

To switch the clock display:

Press MODE to toggle between:

• Clock with day

• Clock with seconds

ALARM

To set the alarm:

1. Press and hold ALARM for 2 seconds.

2. Press / to set alarm time.

3. Press MODE to conrm. indicates alarm is ON.

To toggle alarms ON / OFF:

1. Press ALARM to display alarm time.

2. Press ALARM again to turn alarm ON / OFF.

To silence the alarm:

• Press SNOOZE to silence it for 8 minutes.

• Press any key except SNOOZE to turn the alarm off

and activate it again after 24 hours.

TEMPERATURE AND HUMIDITY

To toggle temperature unit:

Press °C / °F.

To view outdoor sensors temperature readings:

Press CHANNEL.

To auto-scan between sensors:

Press and hold CHANNEL for 2 seconds. Each sensor’s

data is displayed for 3 seconds.

To end auto-scan:

Press CHANNEL or MEM.

To toggle between current, minimum and maximum

records for the selected sensor:

Press MEM repeatedly.

To clear the records:

Press and hold MEM for 2 seconds.

RMR383HG_M_EN_op1.indd 8 15-9-24 ��2:13

TEMPERATURE AND HUMIDITY TREND

The temperature and humidity trend icons are based

on recent readings.

RISING STEADY FALLING

ICE WARNING

If the channel 1 sensor falls between 3°C to –2°C (37°F

to 28°F), ashes to warn you that the temperature is

approaching freezing.

NOTE The warning will automatically stop if the

temperature goes outside the ice-warning range.

HI / LO TEMPERATURE / HUMIDITY ALARM

An alarm can be set to sound if sensor set to channel

1 records above or below a temperature / humidity of

your choice.

To set alarm ON/OFF:

1. Press and hold TEMP / HUMIDITY HI / LO .

2. Use and to select high / low temperature /

humidity alarm. Press TEMP / HUMIDITY HI / LO

to conrm.

3. Press / to set alarm ON / OFF and press TEMP

/ HUMIDITY HI / LO to conrm.

4. If alarm has been activated, use and to select

the temperature / humidity.

5. Press TEMP / HUMIDITY HI / LO to conrm.

To silence the alarm:

Press any key. The alarm resets automatically and will

resound if the hi / lo temperature selected is exceeded

again.

NOTE The THN132N sensor supplied does not support

humidity readings. To enable Hi / Lo Humidity alarm

a thermo-hygro sensor must be purchased and set

to channel 1. For further information on compatible

sensors such as the THGR268 thermo-hygro sensor

please check with your local retailer or go to www.

oregonscientic.com.

HEAT INDEX

The heat index combines temperature and humidity data

to describe the actual temperature felt. The THN132N

sensor supplied does not support heat index display. A

thermo-hygro sensor must be purchased to enable heat

index display for channels 1-3.

RMR383HG_M_EN_op1.indd 9 15-9-24 ��2:13

WARNING HEAT INDEX MEANING

Extreme danger 54.5°C (130°F) Strong risk of

or above dehydration / sun

stroke

Danger 40.5 - 54°C Heat exhaustion

(105 - 129°F) likely

Extremecaution 32.2 - 40°C Possibility of heat

(90 - 104°F) dehydration

Caution 26.6-31.7°C Possibility of heat

(80- 89°F) exhaustion

• To display the heat index, press HEAT INDEX.

• To toggle between current / maximum / minimum

readings, press HEAT INDEX, then press CHANNEL

to select channel 1-3 or indoor, followed by MEM.

• To toggle between temperature / humidity and heat

index display, press and hold HEAT INDEX for 2

seconds. Press HEAT INDEX again to stop this

feature.

NOTE

If the heat index is below 80°F / 26°C, if the

selected sensor does not support humidity measurement

or if the channel is not working, the heat index will display

NA .

COMFORT ZONE

The comfort zone assesses the climate based on current

temperature and humidity measurements.

ICON TEMPERATURE HUMIDITY

Any > 70%

20 - 25°C (68 - 77°F) 40 - 70%

Any < 40%

MOON PHASE

• When calendar is set press or to view the moon

phase for the next / previous day.

• Press and hold or to scan through the years

(2001 to 2099).

New Moon

Waxing Crescent

First quarter

Waxing Gibbous

Full Moon

Waning Gibbous

Last quarter

Waning Crescent

RMR383HG_M_EN_op1.indd 10 15-9-24 ��2:13

Inhaltsverzeichnis

Sprachen:

Andere Oregon Scientific Thermometer Handbücher

Oregon Scientific

Oregon Scientific EMR211 Bedienungsanleitung

Oregon Scientific

Oregon Scientific EMR899HGN Bedienungsanleitung

Oregon Scientific

Oregon Scientific SL102 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR112 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RAR188A Bedienungsanleitung

Oregon Scientific

Oregon Scientific RAR232 Bedienungsanleitung

Oregon Scientific

Oregon Scientific BAR888 Bedienungsanleitung

Oregon Scientific

Oregon Scientific AW131 Bedienungsanleitung

Oregon Scientific

Oregon Scientific BHGR618 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR202 Bedienungsanleitung

Oregon Scientific

Oregon Scientific EMR812A Bedienungsanleitung

Oregon Scientific

Oregon Scientific EMS100 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RGR126 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RAR232 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RAR681 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RAR232 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RGR126N Bedienungsanleitung

Oregon Scientific

Oregon Scientific RAR186 Bedienungsanleitung

Oregon Scientific

Oregon Scientific SL101 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR683HGA Bedienungsanleitung

Oregon Scientific

Oregon Scientific RGR126NX Bedienungsanleitung

Oregon Scientific

Oregon Scientific RAR601 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR112 Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR803A Bedienungsanleitung

Beliebte Thermometer Handbücher anderer Marken

Delton

Delton 981A Bedienungsanleitung

Baker

Baker MM2P Bedienungsanleitung

Tarmo

Tarmo 320281 Bedienungsanleitung

Citizen

Citizen CTD 504 Bedienungsanleitung

TFA

TFA 14.1500 Bedienungsanleitung

Vive

Vive DMD1010 Bedienungsanleitung

Gotemp

Gotemp THB4002 Bedienungsanleitung

GREISINGER

GREISINGER G 1202 Bedienungsanleitung

Amprobe

Amprobe TMD-53W Bedienungsanleitung

Trotec

Trotec BP10 Bedienungsanleitung

Radiance instruments

Radiance instruments RT616 Series Bedienungsanleitung

Eurolec

Eurolec IR151 Bedienungsanleitung

Scaneo

Scaneo TS42B Bedienungsanleitung

Sper scientific

Sper scientific 800043 Bedienungsanleitung

Motorola

Motorola MBP69SN Konfigurationshandbuch

The MeatStick

The MeatStick The MeatStick Bedienungsanleitung

Hama

Hama TH35-A Bedienungsanleitung

Veridian Healthcare

Veridian Healthcare 09-349 Bedienungsanleitung