ORGA L240 Bedienungsanleitung

L240

Low intensity light

Installation, operation and maintenance manual

Orga Aviation BV

Strickledeweg 13

3125 AT SCHIEDAM

The Netherlands

T +31 (0) 10 208 5555

E [email protected]

I www.orga.nl

Version 1.2

Disclaimer

While every effort has been made to provide a complete, up-to-date, accurate manual, Orga will accept no

liability claims for damages resulting from any errors or omissions in this manual.

Table of contents

1 ABOUT THIS DOCUMENT

1.1 Before you start ...................................................................................................................... 4

1.2 Icons used in this document................................................................................................... 4

2SAFETY

2.1 Intended use........................................................................................................................... 5

2.2 Safety instructions .................................................................................................................. 5

2.3 Safety instructions for operation ............................................................................................. 5

2.4 Warranty policy....................................................................................................................... 6

3 DESCRIPTION

3.1 Overview and function of the lighting fixture........................................................................... 8

3.2 Labels ..................................................................................................................................... 9

4 INSTALLATION

4.1 Unpack the delivery .............................................................................................................. 10

4.2 Requirements on the location and orientation ...................................................................... 10

4.3 Do a pre-installation test....................................................................................................... 11

4.4 Install the lighting fixture ....................................................................................................... 11

4.5 Fasteners for installation ...................................................................................................... 12

4.6 Ground the light fixture ......................................................................................................... 12

4.7 Connect the light fixture........................................................................................................ 12

4.7.1 Connect the Strobeline cable to the control panel ................................................... 12

4.7.2 Prepare the cable..................................................................................................... 13

4.7.3 Install the EMC cable gland ..................................................................................... 13

4.7.4 Colour code Strobeline cable ................................................................................... 13

5 MAINTENANCE

5.1 Preventive maintenance ....................................................................................................... 14

5.2 Replace the lighting fixture ................................................................................................... 14

6 TROUBLESHOOTING

6.1 Troubleshooting table ........................................................................................................... 15

EU & UKCA declaration

ABOUT THIS DOCUMENT

1 ABOUT THIS DOCUMENT

This manual gives information about:

•Installation

•Operation

•Maintenance

•Troubleshooting

From here on, this document refers to the L240 light as the ‘lighting fixture’.

1.1 Before you start

1. Make sure that you know and understand the contents in this manual.

2. Follow all procedures in this manual.

3. Never change the sequence of the procedures.

1.2 Icons used in this document

The icons below are used in this document to indicate danger or to give extra information.

WARNING

Do not continue before you understand the contents in this manual.

WARNING

Can cause personal injury.

WARNING

Electrical danger. Can cause personal injury.

CAUTION

Can cause damage to the equipment.

NOTE

Gives further/extra information.

SAFETY

2SAFETY

2.1 Intended use

The lighting fixture provides pilots with visual information on the proximity and height of

objects.

2.2 Safety instructions

2.3 Safety instructions for operation

There are no specific safety precautions necessary.

WARNING

•Make sure that the mains power supply is disconnected before you do

work on the system.

•Do not touch the electrical system for at least 2 minutes after the

mains power supply is disconnected. The voltage in the capacitors can be

dangerous, even if the power supply is disconnected.

•Do not open the device.

•Make sure that the power supply complies with the local safety regula-

tions.

•Use EMC cable glands on both ends of the Strobeline cable, to prevent

damage by lightning and static electric emissions.

•Do not connect the screen of the Strobeline cable to earth.

•Only an electrical engineer is allowed to do work on the electrical system.

WARNING

•Make sure that the system is off, before you do inspections or mainte-

nance on the lights. The light can flash, this bright light can temporarily

dazzle you.

•Install the light in the correct location and orientation. Refer to section 4.2.

CAUTION

•Do not look directly at the light beam from a short distance.

The bright light can temporarily dazzle you.

•Do not use plastic washers. Use the correct fasteners. Refer to

section 4.5.

•Always hold and support the light at the base.

Note

This lighting fixture has visible light and infrared light sources (IR).

The IR light sources can be seen from a long distance at night by a pilot with

night vision goggles.

SAFETY

2.4 Warranty policy

THE FOLLOWING IS THE STANDARD LIMITED WARRANTY FOR THE ORGA

SYSTEMS AND PRODUCTS ("PRODUCTS") SUPPLIED BY ORGA AVIATION B.V.,

SCHIEDAM - THE NETHERLANDS, HEREINAFTER: "ORGA". THIS WARRANTY

APPLIES UNLESS A DIFFERENT WARRANTY HAS BEEN SPECIFICALLY AGREED

TO AND SIGNED BY AN ORGA AUTHORISED REPRESENTATIVE.

LIMITED WARRANTY

(a) Orga warrants, subject to the following limitations, that at time of delivery to Buyer, its

Products will conform to applicable Orga drawings and Product specifications and will be

free from defects in workmanship and material. If applicable, Orga warrants that at the

time of delivery Products are compliant to applicable national and/or international rules

and regulations. However, unauthorised maintenance or repair could invalidate

compliance with such rules and regulations.

(b) The Products are not in conformity as meant under (a) in the case of a defect in

workmanship or material becoming apparent under normal authorised use consistent with

Orga Product instructions and specifications. Normal wear and tear (including but not

limited to lamp failure) or problems with electrical power, relatively minor anomalies which

are customary and/or technically unavoidable, or the need for periodic maintenance shall

not constitute non-conformity.

These warranties shall be available to the initial purchaser, and may be transferable to its

successors and assigns.

The duration of these warranties shall be as follows:

1 For LED-based Lighting fixtures sixty (60) months after shipment of the Product ex

works, Schiedam, the Netherlands1).

2 For xenon strobe lights twenty-four (24) months after shipment of the Product ex

works, Schiedam, the Netherlands1).

3 All other Products twelve (12) months after commissioning, with a maximum of

eighteen (18) months after shipment of the Product ex works, Schiedam, the

Netherlands1)

portion of the original warranty period. If Orga is of the opinion that the complaint about the

defect is justified, Orga will repair or replace at its own option any faulty Product returned

within the warranty period at its cost (including material and labour costs, excluding

shipping costs). Repaired or replaced Products will be delivered ex works, Schiedam, the

Netherlands1). The risk of loss or damage to all Products in transit shall be borne by Buyer.

(d) The integrity and reliability of Orga systems and Products are dependent on the use of

Orga parts and components. To ensure the optimum performance and reliability of your

Orga system, it is strongly advised that only components and modules manufactured by

Orga be used. No other parts can be used without prior written permission from Orga.

Any right under this warranty shall lapse if the Product has been exposed or subjected to

1 Any maintenance or lack of maintenance, repair, installation, handling, transportation,

storage, operation, treatment, failure to observe the instructions for use or use which

is improper, excessive or otherwise is not in compliance with Orga's instructions; or

1) EXW, Incoterms

SAFETY

2 Any direct intervention, alteration, modification, transformation or repair by anyone

other than Orga or those specifically authorised in writing by Orga, without prior

written permission from Orga; or

3 Any accident, contamination, foreign object damage, abuse, misuse, neglect,

negligence or any other circumstances after delivery to Buyer; or

4 Any damage induced by failure of an Orga supplied Product not under warranty or by

any Product not supplied by Orga.

Orga shall not be responsible for Buyer's or any third party's Product, Product information,

or memory data contained in, sorted on, or integrated with any Product returned to Orga,

whether under warranty or not. Buyer is responsible for backing up its programs and data

to protect against loss or corruption.

(e) Repair or redelivery as meant in the previous paragraphs shall in principle be effected

only within the Netherlands. Repair and or redelivery outside the Netherlands shall only be

effected if this can reasonably be requested of Orga, such to be judged exclusively by

Orga.

With respect to noticeable defects, the Buyer must submit a claim in writing within three (3)

working days after delivery, failing which any claim on Orga will lapse.

Claims with respect to other defects must be made in writing within ten (10) working days

after their appearance, failing which any claim on Orga will lapse.

In respect of Products or parts of Products which Orga received from third parties, the

warranty obligations granted by Orga to the Buyer shall never exceed in nature nor in

duration the warranty obligations granted by those third parties to Orga.

DESCRIPTION

3DESCRIPTION

3.1 Overview and function of the lighting fixture

The L240 is a light source for the marking of aviation hazards, typically highrise structures

as wind turbines, communication towers, broadcast antennas, electricity transmission and

distribution towers, chimneys, bridges and buildings, and can be used stand-alone or as a

part of a obstacle light system.

The built-in photocell measures the ambient light level. Based on this measurement, the

lighting fixture can automatically switch between day, twilight and night operating mode.

The -G variant has a GPS flash synchronizer. All -G version lights are synchronised with

the GPS signal and will flash at the same time.

The -IR variant has visible light and an infrared light source. The IR light sources can be

seen with night vision goggles.

The internal monitoring system warns in the case of a malfunction in these components:

•(IR) LED light source

•Photocell

•GPS signal

If the light does not operate, the internal fail contact comes on and if applicable a warning

signal is sent to the CIP.

ADom

B Mounting feet

C Label

D Earth connection (PE) Note: If a bracket is supplied, the PE is connected to the bracket

EConnection cable

F Circular spirit level

DESCRIPTION

3.2 Labels

A Company logo

B Address information

C Other logo’s such as CE certification

D Serial number and year of production

E Barcode

F Type name

G Electrical information

H Certification information (if applicable)

I Additional information (if applicable)

J Warning sign (if applicable)

Note

This label is an example. The actual label may vary and is dependant of the

version of your product.

20XX

Serial No. :

12345678AAwwyyxxxx

WARNING:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

XX-XXVac; XX-XXHz

XX W; XVA

XXXXXXXXXXXXXXXXX

Ex e mb IIC Tx Gb

KEMA XXATEXxxxx X

IECEx DEKxxxxxx X

-XX °C ≤ Ta ≤ +XX °C

II 2G

0344

Strickledeweg 13

NL - 3125AT Schiedam

T +31 (0)10 208 5555

[email protected] - www.orga.nl

B C D E

INSTALLATION

4 INSTALLATION

4.1 Unpack the delivery

1. Do a check on the delivery for completeness.

2. Do a check on the delivery for damage.

3. Report damages or missing parts immediately to Orga. Refer to the last page for the

contact information.

4.2 Requirements on the location and orientation

Make sure that the location of the lighting fixture obeys these conditions:

•The location and orientation must be correct. Refer to ICAO Annex 14, Volume 1, FAA

or national CAA regulations.

•The structure must have a good primary lightning arresting system. Refer to i.e.NFPA-

780 or DIN 48801.

•The lighting fixture (A) must have a lightning protection rod or equivalent grounded

metal structure (B):

•a < 45 º, preferred: a = 30 º

•x > 15 cm (x > 0.5 ft), preferred: 50 cm ≤ x ≤ 150 cm (1.5 ft ≤ x ≤ 5 ft)

•The lighting fixture (A) must be installed

on a mounting bracket. Make sure the

special ground tags on the bottom of the

lighting fixture are correctly connected.

•Both the mounting bracket and the

lightning protection device must be

grounded correctly. Make sure that they

are grounded refer to the lightning

currents that realistically can occur.

•The cable length that is exposed to

lightning must be as short as possible.

•Make sure that the lighting fixture is

accessible.

•Wind turbine blades

•Light sources

•Other lights

•Other equipment

•Structures

Make sure that the photocell has the clearest possible view on the environment. Make

sure that the photocell points away from obstacles,such as:

•For -G versions it is necessary that the GPS antenna can receive signals from as

many satellites as possible. Make sure that the light has a clear sky visibility. Do not

install the lighting fixture on a location near large areas of conductive metal.

Note

If the light will be exposed to high RF (radio frequency) radiation, ask Orga for

more instructions before installation.

Note

The photocell is embedded in the light and measures the ambient light level

upwards. Flashing lights have a photocell facingoutwards. the location is

shown by an arrow in the light.

Inhaltsverzeichnis

Andere ORGA Beleuchtungsausrüstung Handbücher

ORGA

ORGA L550 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung