Oricom Babysense 7 Bedienungsanleitung

Ref: 21102020

ORICOM CUSTOMER SUPPORT

Oricom have a trained and dedicated team of Customer Support

Representatives, each with the knowledge and resources to assist in

answering your questions quickly and efciently.

Oricom Support - Australia

For all product enquiries, troubleshooting or to discuss the range of Oricom

products, feel free to contact Oricom or visit our website for answers to

frequently asked questions.

02 4574 8888

Monday - Friday 8am – 6pm AEST

Email: [email protected]

www.oricom.com.au

Oricom Support - New Zealand

0800 674 266

Monday - Friday 11am - 7pm NZST

Email: [email protected]

Babysense7 is intended for use as an Infant Apnoea Alarm.

ALWAYS READ THE LABEL AND USER GUIDE, USE ONLY AS DIRECTED.

Please retain your purchase receipt and attach to the back page of this

user guide. You will need to produce this if warranty service is required.

Babysense7 is included as a

medical device on the Australian

(ARTG No. 97479)

User Guide

BabysenseTM7

Table of contents

Important Use And Safety Warning .........................................1

General Information ...............................................................3

Installation.............................................................................5

Operation...............................................................................9

Troubleshooting Guide .........................................................13

Express Warranty (Australia) ................................................15

Need Help?

If you need assistance setting up or using your Oricom Babysense7 now

or in the future, call Oricom Product Support.

Australia (02) 4574 8888

www.oricom.com.au

Mon-Fri 8am – 6pm AEST

New Zealand 0800 67 42 66

www.oricom.co.nz

Mon-Fri 11am – 7pm NZST

Important Use And Safety Warning

IMPORTANT USE AND SAFETY WARNING

It is essential that all users of your Babysense7 monitor read and

understand this user guide thoroughly before installing or using the

product. This user guide contains detailed information on installation and

operation of the Babysense7 monitor which all users need to be aware

of to ensure that the monitor operates properly. If you are unsure of how

to install and operate the Babysense7 monitor, please contact Customer

Support on (02) 4574 8888.

Your Babysense7 monitor is designed to be an aid for use with

healthy infants up to one year of age and should not be used as

a substitute for responsible and proper adult supervision of your

baby.

The Babysense7 monitor has been designed to provide an alert in the

form of an alarm if your baby’s breathing movement rate slows below

10 breaths per minute or cannot be detected for more than 20 seconds.

However, you must always stay within hearing range of the alarm control

unit (as determined from your daily testing of the product) during use and

keep background noise to a minimum. Each home or place of care will

have a different hearing range. It is important to determine the correct

hearing range in every location that you use Babysense7 for the product

to adequately assist you.

Babysense7 is a high quality, high sensitivity medical device which must

be handled with care. The following steps are recommended for the best

operation of the Babysense7:

• You must undertake the performance test daily and every time you

move the monitor, change bedding or relocate baby's cot or bassinet

position (as set out in this user guide on page 10).

• Make sure the control unit and cables are kept out of reach of your

baby and other young children.

• Never place the control unit inside your baby's cot or bassinet.

Important Use And Safety Warning

WARNING: To avoid possible danger of strangulation from cords,

keep the cords out of reach of children. Ensure that excess cords

are secured with the included cable tie.

• Do not place the cords in a high "wear and tear" location.

• Never use a frayed or damaged cord.

• Never cover the control unit with clothes, towels or blankets or any

other item.

• Never use or place your control unit in or near water (e.g. near a bath).

• Do not handle roughly, drop or throw the monitor.

• Follow the installation instructions carefully to ensure that it is installed

securely and correctly.

• Babysense7 is not a toy. Do not allow children of any age to play with it.

• Do not operate vaporizer or ventilator directly towards the bed.

• Babysense7 will not work with another living being present in the same

cot or bassinet as your baby.

• Ensure adequately charged batteries are used at all times.

• Babysense7 sensor pads must be properly placed below the mattress

of your baby’s cot or bassinet. Do not place the sensor pads above the

mattress.

• Please remove batteries if the device is not in use for more than 3 months.

• If you have any problems with this device, such as setting up,

maintaining or using, please contact Oricom. Also please report any

unexpected operation or events that occur.

• Do not use the equipment if you notice a change in the system's

performance, if the system is damaged, or if any of its components are

worn or frayed.

• Babysense7 should not be used close to or with other equipment. If

use near other equipment is necessary, verication of normal operation

in that conguration is necessary.

• All RF transmitting devices should be located at least 1m away from

Babysense7 cabling and sensor pads, as these devices may interfere

with the operation of Babysense7.

IMPORTANT: It is strongly advised that every caregiver learn how

to administer rst aid.

General Information

During the rst year of life infants may experience irregular breathing

patterns. These signs may indicate a cold, fever, or other illness.

Babysense7 is an infant apnoea alarm which gives parents (or caretakers)

some comfort, by improving the possibility of intervention in the event of

irregular breathing movement rate or distress.

What is Babysense7?

Babysense7 is a home breathing movement rate monitor designed to be

an aid for use with healthy infants up to one year of age and is not to be

relied on for use with infants requiring medical attention or supervision.

Medically trained staff such as nurses or non-medically trained users

such as parents or caregivers may use the Babysense7. The Babysense7

is intended for home use. If you have any concerns about your baby's

health, always consult a medical practitioner.

Babysense7 continually detects your baby's breathing movement rate

and will set off a sound and visual alarm if the breathing movement rate

slows to below 10 breaths per minute or cannot be detected for more

than 20 seconds. Check that the alarm can be heard in all locations

throughout the home or place of care. The system's non-touch sensor

pads under the mattress monitor your baby's breathing movement rate

without impeding your baby.

Pack Contents

• One control unit

• One control unit holder

• One hanging hook

• Two sensor pads

• Two reuseable plastic cable ties

Requires 4 AA size, 1.5 volt high quality Alkaline batteries (not supplied).

DO NOT use rechargeable batteries.

If any items are missing from the pack, please call Oricom Customer Support.

General Information

Technical Specications

• Powered by 4 size AA, 1.5 volt high quality Alkaline batteries (not

supplied). Power consumption approx. 1mA. DO NOT use rechargeable

batteries.

• Battery life approx. 6 months using high quality alkaline batteries.

• Alarm volume typically 85dB SPL at distance of one metre from control unit.

• Size of sensor pad is 216mm in diameter.

Principle Of Operation

Babysense7 continually detects baby's breathing movement rate, and

will set off a sound and visual alarm if breathing movement stops for 20

seconds or if the breathing movement rate slows to below 10 breaths per

minute. The system's non-touch sensor pads under the mattress monitor

baby's breathing movement without restraining baby.

Installation

1. Remove battery cover by inserting a ﬂat screw driver into the opening

recess and insert, in accordance with the markings, 4 new and

identical size AA 1.5 volt high quality Alkaline batteries, close cover.

Note: Please dispose of used batteries in accordance with local waste

regulations.

2. Place control unit holder on the base of the cot and in between two

bars as shown in illustration 1.

Illustration 1

Control unit holder

Cables

Sensor

3. Sensor pad installation:

• When using for infant not yet able to crawl, place one sensor pad as

shown in illustration 2. Make sure the sensor is placed underneath

baby’s location in crib.

• When baby begins to crawl, and is able to move onto areas not

"covered" by a single sensor pad, attach the second sensor and place

the two sensors as shown in illustration 2.

Installation

PLEASE NOTE: The sensors shall be placed with the marking “THIS SIDE

UP” facing upwards.

Sensor pads

(Under maress)

Control unit

Illustraon 2

Top crib/bed view

For babies not

yet able to crawl For crawling babies

Top crib/bed view

4. Pass the cord(s) of the sensor pad(s) through special openings in the

holder as shown in illustration 3.

Cables

Illustration 3

Control unit

holder

PLEASE NOTE: DO NOT ATTACH THE CONTROL UNIT TO THE TOP RAIL

OF THE COT. DO NOT EXTEND CABLES IN ANYWAY.

5. Attach end(s) of the cord(s) to the outlets marked "SENSOR" on the

back of control unit (as shown in illustration 4 and 5). When using one

sensor pad, attach to any “SENSOR” outlet.

PLEASE NOTE: Do not attach any cable to the blocked socket, marked

"DO NOT USE".

Cable Cable

Bed/Crib

base Control unit holder

Control

Unit

Illustraon 4

6. Should the design of the cot not allow proper installation with the

control unit holder, please use the supplied hanging hook (as shown in

illustration 5). Hang the control unit from the bottom edge of the cot or

afx the hook with a screw (not supplied) to the bottom edge of the cot

and hang the control unit from the bottom edge of the cot.

Sensor Do not use Sensor

Slot

Illustraon 5

Sensor Donot use Sensor

Slot

Oponal Hanging hook

Installation

Inhaltsverzeichnis

Andere Oricom Babyphone Handbücher

Oricom

Oricom SC320 Bedienungsanleitung

Oricom

Oricom Secure 700 Bedienungsanleitung

Oricom

Oricom OBH930 Bedienungsanleitung

Oricom

Oricom Secure895 Bedienungsanleitung

Oricom

Oricom Secure 300 Bedienungsanleitung

Oricom

Oricom OBH500-2 Bedienungsanleitung

Oricom

Oricom secure 210 Bedienungsanleitung

Oricom

Oricom OBH930PTZ Bedienungsanleitung

Oricom

Oricom SC520 Bedienungsanleitung

Oricom

Oricom 870 Bedienungsanleitung

Oricom

Oricom Babysense2 Bedienungsanleitung

Oricom

Oricom Secure740 Bedienungsanleitung

Oricom

Oricom Secure 610 Bedienungsanleitung

Oricom

Oricom OBH930 Bedienungsanleitung

Oricom

Oricom OBH650P Bedienungsanleitung

Oricom

Oricom 08BUN Bedienungsanleitung

Oricom

Oricom Secure 310 Bedienungsanleitung

Oricom

Oricom babysense 2 Bedienungsanleitung

Oricom

Oricom OBH500 Bedienungsanleitung

Oricom

Oricom Secure740 Bedienungsanleitung

Oricom

Oricom CU875 Bedienungsanleitung

Oricom

Oricom babysense 2 Bedienungsanleitung

Oricom

Oricom OBH36T Bedienungsanleitung

Oricom

Oricom Secure 700 Bedienungsanleitung

Beliebte Babyphone Handbücher anderer Marken

Philips

Philips SCD 469 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

Philips

Philips AVENT SCD841 Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Philips

Philips SBC SC364 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung

Summer

Summer Day & Night 28470A Bedienungsanleitung

Ivation

Ivation Wireless Monitoring System Bedienungsanleitung