Oricom BB200 Bedienungsanleitung

Oricom BB200

DECT Cordless Telephone

User Guide

Keep this user guide for future reference

-2-

CONTENTS

Getting Started…………………………………………………………………………. 3

Handset and base unit………………………………………………………………… 3

Handset Display Guide………………………………………………………………... 4

Safety Information……………………………………………………………………… 5

Installation…………………………………………………………………………….... 6

Power supply……………………………………………………………………………6

Fitting batteries…………………………………………………………………………. 6

Recharging your cordless phone………………………………………………………6

Replacing batteries……………………………………………………………………..6

Basic Operation…………………………………………………………………………7

To answer a call…………………………………………………………………………7

Making a call…………………………………………………………………………….7

Using the Hands-free speakerphone………………………………………………… 7

Pre-dialling……………………………………………………………………………… 8

Last number redial………………………………………………………………………8

Call duration timer…………………………………………………………………….. 8

Adjusting the earpiece volume………………………………………………………...8

To page the handset………………………………………………………………….. 8

Handset ringer volume………………………………………………………………… 9

Handset ringer melody………………………………………………………………… 9

To mute the mouthpiece……………………………………………………………… 9

To lock the keypad ……………………………………………………………………. 9

Using your cordless on a PBX…………………………………………………………10

Turning off the handset ringer…………………………………………………………10

Message waiting indication ……………………………………………………………10

Take 2 different calls at the same time ………………………………………………10

Phonebook Memories and Caller ID……………………………………………….. 11

To store a number in the phonebook………………………………………………. 11

To dial a number from the phonebook………………………………………………11

To delete a number from the phonebook…………………………………………...11

Caller ID………………………………………………………………………………...12

Check caller ID records……………………………………………………………… 12

To return a call………………………………………………………………………… 13

To delete a caller ID record………………………………………………………….. 13

To store a caller ID record…………………………………………………………… 13

Troubleshooting………………………………………………………………………. 14

Notes for Operation in New Zealand……………………………………………….. 15

Warranty………………………………………………………………………………. 16

-3-

GETTING STARTED

Unpacking your Oricom BB200

Retain all packing materials in a safe place, in case you later need to transport it or

return it for servicing.

In the box, you will find: -1 cordless handset, 1 Base Unit , 2AAA rechargeable

600mAh batteries, 1 AC adaptor, telephone line cord and adaptor plug, warranty card

and this user manual.

Handset and Base unit

1. Memory button6. Mute/Delete button

2. Back and Recall button 7. Ringer on/off button

3. Speakerphone button 8. Ringer volume button

4. Talk button 9. Handset Locator button

5. Caller ID and Forward button 10. Last Number Redial/Pause button

11. # and Keypad Lock button

-4-

HANDSET DISPLAY GUIDE

Legend

&Memory/Store (to store a number in memory or to make a

call to a stored number)

Battery level

Battery level (Battery low)

Handset Ringer “ON”

%Handset Ringer “OFF”

XSpeakerphone “ON”

Keypad locked

On steady: telephone line is busy.

Flashing: incoming call

xThe “X”appears when the microphone is muted

On steadily: all new Caller ID records have been listened to

but not yet deleted

Flashing: new Caller ID records present

On steadily: handset within range of the base unit

Flashing: handset out of range

*Indicates new message received

Intercom operating: during calls to another handset

More digits to view to the right or to the left of the display

-5-

SAFETY INFORMATION

•Avoid exposure of this telephone to moisture or liquid.

•To prevent electric shock, do not open the handset or base cabinet.

•Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and

charging conductors.

•Do not use the handset in an explosive hazard area such as where there is gas

leaking.

•There is a chance that the telephone could be damaged by an electrical storm. It is

recommended that users unplug the phone from the mains supply and telephone

socket during a storm.

•Follow the local regulations regarding the disposal of your packing materials,

exhausted batteries and used phone. Wherever possible, recycle those materials.

•We advise that this phone should not be used near intensive care medical

equipment or by persons with pacemakers.

•Clean with a dry, soft, lint-free cloth. Never use cleaning agents, particularly

aggressive solvents.

•Because the phone works by sending radio signals between base station and

handset, wearers of hearing aids may experience interference in the form of a

humming noise.

•Your phone can interfere with electrical equipment such as answering machines, TV

and radio sets, clock radios and computers if placed too close. It is recommended

that you position the base unit at least one metre from such appliances.

•This telephone complies with applicable safety requirements for exposure to radio

waves (EMR). The main power of this telephone does not exceed 20mW limit at

which point testing is required.

•The earpiece of the handset may attract small metal objects such as staples and

pins. Care should be taken when placing the handset near these items.

CAUTION

This telephone is not designed for making emergency telephone calls when the

mains power fails. Always have a corded phone available to be able to make

and receive calls to emergency services if the mains power fails.

Do not use your telephone during an electrical thunderstorm as it is possible to

get an electric shock. Refer to information contained in the White pages

directory.

CAUTION

Only use only the mains adaptor supplied with this phone. Incorrect adaptor

polarity or voltage can seriously damage the unit.

Adaptor

Model #: S060020D22

Approval #:Q031027

Input: 240 Vac / 50Hz

Output: 6VDC /200MA 1.2VA

-6-

INSTALLATION

POWER SUPPLY

IMPORTANT!

The mains power adaptor must be installed near the equipment and must be easily

accessible. Power must be turned on at all times for the phone to work

1. Connect the output plug of the mains adaptor to the adaptor socket on the back of

the base unit and the mains adaptor to the wall mains supply.

2. Connect the telephone lead to the phone cord socket on the back of the base unit

and to the wall phone socket.

FITTING BATTERIES

IMPORTANT: Only use the rechargeable batteries provided with this phone.

1.Place your handset with the keypad facing downwards.

2.Remove the battery compartment cover by pushing on the indent and sliding it in

your direction.

3.Insert the two batteries (AAA) into the battery compartment, observing the correct

polarity.

4.Slide the battery compartment cover gently back into place, it will click when it is in

the correct position.

IMPORTANT!

PLACE THE HANDSET IN THE BASE UNIT AND LEAVE FOR 15 HOURS TO

CHARGE THE BATTERIES FULLY BEFORE FIRST USE.

RECHARGING YOUR CORDLESS PHONE

When your handset battery becomes low the Low Battery symbol appears on the

display. To recharge it, just replace the handset on the base unit.

Tip! It is good practice to put the handset on the base unit to charge when it is

not in use or every evening to ensure the handset is always fully charged

REPLACING BATTERIES

CAUTION

THEREIS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN

INCORRECT TYPE. Never use non-rechargeable batteries; use only type

supplied with this telephone. Ni-MH batteries must be disposed of in

accordance with the applicable waste disposal regulations. When the handset

needs to be charged more frequently, even when batteries are correctly recharged, it is

time to replace the batteries: follow the instruction above “Fitting Batteries”.

-7-

BASIC OPERATION

Introduction

When the phone is in standby mode, the LCD displays the handset name. The battery

icon reflects the current battery level and the signal icon indicates the handset is linked

to the base.

TO ANSWER A CALL

•When you receive a call, both handset and base will ring, the symbol appears on

the display, and both the red led on the handset locator button and the big red led on

the phone base will start flashing. If your cordless is directly connected to the

telephone line (not via PABX) and the Caller Details Service has been activated by

your server, the caller’s telephone number (if available) appears on the display.

•Press the button to answer the call, the symbol will come up steadily on the

display and the base red led with flash.

•To end a call, press again the button, or alternatively replace the handset back in

the base. The display symbol and the base red led disappear.

MAKING A CALL

•Press button.

•The symbol appears steadily on the display and the base red led starts flashing.

•Check that the dial tone is present then key in the number.

•The dialled number appears on the display.

•To end the call, press again the button or alternatively replace the handset back

in the base.

USING THE HANDS-FREE SPEAKERPHONE

The Hands-free function provides the convenience of talking to the caller without

holding onto the phone and allows others in the room to be involved in the

conversation.

To activate the speakerphone, press the Xbutton when the handset is in standby

mode or after having pressed the button to make or pick up a call.

The speakerphone is active if you can hear the callersvoice coming from the speaker

and can see the Xand the symbols on the display (hold repeatedly the Volume

button to adjust the speaker volume). To switch back to normal mode from a

speakerphone call, briefly press the Xbutton.

-8-

PRE-DAILLING

Pre-dial allows you to enter a telephone number and verify it on the screen before you

place the call. The screen displays the last 12 digits dialled but you can enter up to 2

digits.

•In standby mode enter the phone number you wish to dial.

•To enter a pause, press the button and a dash “-“will appear in the display.

•If you make a mistake, pressDEL to erase one digit at a time. Or you can press

and hold the DEL button to clear the entire number and return the phone to standby.

•Press to dial out the number.

•To end the call, press the button again, or replace the handset back in the base.

Note:If you have connected this phone to an office phone system (PBX) you may need

to enter a pause for a few seconds between dialling the line access code and the

actual phone number.

To pause, press the button and a dash “ -“will appear in the display.

LAST NUMBER REDIAL

You can review and call back the last 3 numbers you have dialled as your cordless

stores them in the redial memory.

•In the standby mode press the button to scroll through the last 3 numbers you

dialled.

•Select the number you want to redial and press , to dial the number.

CALL DURATION TIIMER

When you make or answer a call the display shows the call duration in time minutes

and seconds.

ADJUSTING THE EARPIECE VOLUME

During a call, to adjust the volume in the handset’s earpiece or speakerphone press

the volume button repeatedly .

The display shows the current volume level: the more “0’s” the highest the volume (“0”

to “00000”).

TO PAGE THE HANDSET

This function is useful if you can’t find your handset.

•On the base unit press and release the button. The handset rings with a special

tone.

•To stop the handset ringing, on the handset press any button or numbered key.

-9-

HANDSET RINGER VOLUME

•While the handset is in the standby mode press the volume button.

•Press the to decrease the volume level and to increase the volume level.

The display shows the current volume level: the less “0’s”is the lowest level and

more “00000” is the highest level.);

the %symbol indicates the ringer is turned off.

•Press the button again to confirm, otherwise wait a few seconds for the new

setting to be automatically confirmed and the display to get back to standby mode.

HANDSET RINGER MELODY

You have a choice of 9 ringing melodies.

•While the handset is idling (not busy on a call) press the button and hold it for

about 3 seconds, the display shows “d--d” followed by the number (1-9) current

ringer melody.

•Press the or button briefly to hear the different ringing melodies.

•When you reach the melody you prefer press the button again to confirm,

otherwise wait a few seconds for the new setting to be automatically confirmed and

the display to get back to standby mode.

TO MUTE THE MOUTHPIECE

To put the call on hold, so that the person on the other end cannot hear you, press the

DEL button briefly. While the mouthpiece is muted xis shown on the display.

To return to the call press the DEL button again.

TO LOCK THE KEYPAD

To lock the handset’s keypad so that no buttons can be pressed.

To block the handset keypad, while handset is idle press #/ and hold it for a few

seconds; until you hear a confirmation beep and appears on the display.

To unlock the keypad, press #/ again and hold it until disappears from the display.

USING YOUR CORDLESS ON A OFFICE PHONE SYSTEM (PBX)

PAUSE FUNCTION

If you have connected this phone to an office phone system (PBX) you may need to

enter a pause for a few seconds between dialling the line access code and the actual

phone number. To enter a 3 second pause, press the button and a dash “ -“will

appear in the display.

-10 -

TURNING OFF THE HANDSET RINGER

•When the handset is in the standby mode press and hold for a few seconds the

*button, the symbol %will appear on the display.

•To turn the ringer back on, press and hold again the button *, the symbol %will

disappear from the display.

IMPORTANT: with this function active only the base will ring and the call symbol

will flash on the display.

MESSAGE WAITING INDICATION

You have to subscribe to a voice message service (eg Telstra Message Bank) from

your local service provider to use this feature. (Subscription and other charges may

apply).

When you receive a voice message the *icon will appear on the display. When you

retrieve your messages the message *will turn off. You can also turn it off by

pressing DEL for 2 seconds in the standby mode.

HOW TO TAKE 2 DIFFERENT CALLS AT THE SAME TIME

You can use the (Recall) button to answer a second call while you are on the

phone. However this service will need to be turned on. For example to turn on

Telstra’s Call Waiting service:

1. Press wait for dial tone then Press *43#

2. You will hear a service tone then Press .

During a call, you will hear two loud beeps periodically to notify you of another

incoming call. If you wish to answer this call:-

1. When the handset receives a second call, the number of the caller appears on the

display.. Press (Recall) when you hear dial tone Press 2 to put the current

call on hold and talk with the second caller.

2. Subsequent presses of listen for dial tone then Press 2 will toggle you

between these 2 callers.

Caller information of this second call will be stored in the call log.

NOTE: If you have subscribed to your telephone network operators Call Waiting Caller

ID service, your phone will also display the number of the second incoming call for

around 10 seconds while you are talking on the phone or until you press a key on the

phone.

Inhaltsverzeichnis

Andere Oricom Schnurloses Telefon Handbücher

Oricom

Oricom IP-7 Bedienungsanleitung

Oricom

Oricom Pro810 Bedienungsanleitung

Oricom

Oricom Professional Series PRO910 Bedienungsanleitung

Oricom

Oricom T1000-1 Bedienungsanleitung

Oricom

Oricom ECO60-1 Bedienungsanleitung

Oricom

Oricom M800 Series Bedienungsanleitung

Oricom

Oricom M600 Series Bedienungsanleitung

Oricom

Oricom ECO600 Bedienungsanleitung

Oricom

Oricom 8000 Bedienungsanleitung

Oricom

Oricom S6000 Series Bedienungsanleitung

Oricom

Oricom SLIM-9000 Bedienungsanleitung

Oricom

Oricom T1000 Bedienungsanleitung

Oricom

Oricom ECO90 Bedienungsanleitung

Oricom

Oricom BB100 Bedienungsanleitung

Oricom

Oricom M5200 Series Bedienungsanleitung

Oricom

Oricom S209 Bedienungsanleitung

Oricom

Oricom M2400 Series Bedienungsanleitung

Oricom

Oricom M5500 Series Bedienungsanleitung

Oricom

Oricom eco5200 Series Bedienungsanleitung

Oricom

Oricom pro600 DECT Bedienungsanleitung

Oricom

Oricom TA2000 Series Bedienungsanleitung

Oricom

Oricom eco71 Bedienungsanleitung

Oricom

Oricom M900 Bedienungsanleitung

Oricom

Oricom ECO710 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Furuno

Furuno FM-4721 Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch