Oriental motor US2 Series Bedienungsanleitung

Speed Control Motor and Controller Package

US2 Series

Motor Speed controller

HM-9352

Operation switch Rotation

direction switch

Setting dial

Front panel

Display

Cable fixing part

Motor connector

CN2

Input signal terminal

TB1

Power supply

connector

CN1

To lock so that the setting does not change

And others.....

 To display the rotation speed of the gearhead output shaft

 To limit the setting range of the rotation speed

 To start and stop the motor slowly

Various settings can be performed when removing the front panel.

When the front panel is removed

Many other useful features are also available

Front side

Rear side

Set using these keys

You can lock or release only when the display shows the rotation speed.

ESC

key

ESC

key

Press and

hold for

5 seconds

Press and

hold for

5 seconds

The display blinks

several times

The display blinks

several times

Locking

the data

Lock

Releasing

the lock

Release

ESC key FUNCTION key QUICK START GUIDE

Thank you for purchasing an Oriental Motor product.

Use the product correctly after thoroughly reading the section "Safety precautions" of the operating manual.

For more information about how to use the product, refer to the separate OPERATING MANUAL .

Refer to "6 Convenient functions"

OPERATING MANUAL

In a locking

state

Connect an AC power supply to the CN1.

Insert the motor connector in the speed controller connector.

•Ensure that the connector plugged in securely.

•Be sure to ground a motor and speed controller using the Protective Earth Terminal (PE) and

FG terminal, respectively.

Turn on the power supply

after connecting.

Adjust the rotation speed using the setting dial

of the front panel.

The rotation speed

makes faster. Decelerate

Push

Accelerate

[ Turn clockwise ]

The rotation speed has

been set (stored).

The motor rotates at the

set speed from the next time.

[ Push ]

Indication: Rotation speed

Switch the operation switch to

the RUN side.

The motor starts rotating.

Turn on the AC power supply.

Start the motor operation.

Change the speed.

Stop the motor.

The motor stops when switching

to the STAND-BY side.

Display is lit

●Strip the insulation cover

of the lead wire

When a cable other than the supplied

power-supply cable is used

●Applicable lead wire

AWG18 to 14 (0.75 to 2.0 mm2)

Insert the lead wire while

pushing the button of the

orange color with a screwdriver.

Button of the orange color

The rotation direction varies depending

on the gear ratio.

Changing the rotation direction

Rotation direction switch

CCW

(REV) CW

(FWD)

TB1

CN2

CN1 4

10 mm

(0.39 in.)

1 Connecting 2 Operating a motor

OPERATING MANUAL

Refer to "4 Connecting"

Refer to "5 Operating"

OPERATING MANUAL

When , , etc.(alarm code) was

displayed

Refer to "7 Alarms"

If it did not rotate,

Refer to "8 Troubleshooting"

OPERATING MANUAL

FWD

REV

Connecting the lead wire

Single-phase 110/115 VAC,

200 VAC, 220/230 VAC

The indication of the terminal varies depending

on the voltage of the product.

Connector model: GFKC2,5/3-ST-7,62

(PHOENIX CONTACT GmbH & Co. KG)

•Connect the live side to terminal L or L1,

and the neutral side to terminal N or L2.

•Ground the speed controller using a

FG terminal.

Single-phase 100 VAC

AC power

supply

Grounding

Ground the product securely in order to prevent electric shock or damage to the

product by static electricity. The product will tend to be electrified especially in a dry

environment, so it may be damaged by static electricity.

Note

CN1

To power supply

Speed controller : Rear side

CN2

Motor

Andere Handbücher für US2 Series

Andere Oriental motor Gleichstromantrieb Handbücher

Oriental motor

Oriental motor BLH Series Bedienungsanleitung

Oriental motor

Oriental motor AlphaStep AZ Series Bedienungsanleitung

Oriental motor

Oriental motor LSD-K Bedienungsanleitung

Oriental motor

Oriental motor CMD Bedienungsanleitung

Oriental motor

Oriental motor EZ limo EZS II Series Bedienungsanleitung

Oriental motor

Oriental motor CRK Series Bedienungsanleitung

Oriental motor

Oriental motor LSD-A Bedienungsanleitung

Oriental motor

Oriental motor BLE Series Bedienungsanleitung

Oriental motor

Oriental motor LSD-KD Bedienungsanleitung

Oriental motor

Oriental motor CVD Series Bedienungsanleitung

Oriental motor

Oriental motor CVD Series Bedienungsanleitung

Oriental motor

Oriental motor CVD Series Bedienungsanleitung

Oriental motor

Oriental motor LSD-AD Bedienungsanleitung

Oriental motor

Oriental motor Vextra PK264-E2.0A Bedienungsanleitung

Oriental motor

Oriental motor OPX-2A Bedienungsanleitung

Oriental motor

Oriental motor VEXTA TD Series Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung