Orion AM2000 Bedienungsanleitung
PROFESSIONAL
SECURITY SYSTEM
INSTRUCTIONS FOR USE
IMPORTANT! PLEASE READ THESE INSTRUCTIONS CAREFULLY.
AM2000
WIRELESS AUTODIAL
HOME ALARM SYSTEM
2WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000
PROFESSIONAL
SECURITY SYSTEM
RECORD VOICE
MEMO/ CONNECT
BUTTON
STAY ARM
(HOME MODE)
DISARM
ARM
RFID READER
/ PLAY BACK
VOICE MEMO
CALL
STATUS
INDICATOR
GSM SIGNAL
INDICATOR
ILLUMINATED
TOUCH KEYPAD
1IDENTIFICATION
Customer Service Phone: (03) 9982 5111 (Monday to Friday 8.30am – 5.30pm EST)
Email: [email protected]
For further information visit www.orionlive.com.au
PLEASE CONTACT IF YOU HAVE ANY
CONCERNS OR PROBLEMS WITH THIS PRODUCT
IMPORTANT BEFORE RETURNING THIS
PRODUCT TO THE RETAILER
CONTENTS:
ALARM PANEL
2 X DOOR/
WINDOW
CONTACT
SENSORS
POWER
SUPPLY
DETERRENT
STICKERS
MOUNTING SCREWS,
PLUGS AND BRACKETS
USER MANUAL
2 X PIR
MOTION
SENSORS
2 X REMOTE
CONTROLS
2 X RFID TAGS
WIRELESS AUTODIAL
WIRELESS AUTODIAL
WIRELESS AUTODIAL
HOME ALARM SYSTEM
CONTROLS
2 X RFID TAGS
THESE PREMISES ARE PROTECTED BY A
MULTI-DETECTION POINT
SECURITY SYSTEM
ALARM PANEL
SENSORS
3
WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000
BACK-UP
BATTERIES
MICROPHONE BUZZER
TAMPER
SWITCH
LOUD
SPEAKER
ILLUMINATED
TOUCH KEYPAD
2ALARM PANEL
ARM
Press the Arm Button to arm the system.
HOME MODE
Press the Home Button to arm the system
in home mode. All the sensors in Normal Zone
are armed except those in Home Mode Zone
which are disarmed so that user can move
freely at home.
DISARM ON KEYPAD
Input 4 digits password (Default:1234), and
press the Disarm Button to disarm the
system after one beep. If three beeps are
heard, password is wrong and please
input again.
DISARM BY RFID TAG
Wave the RFID tag near the RFID Reader area
to disarm the system.
GSM SIGNAL INDICATOR
GSM Networking searching:
- Flashes once every second.
GSM signal normal:
- Flashes once every 2 seconds.
IMPORTANT
A SIM card is required to access most functions of AM2000 Home Alarm System.
1. Restart the alarm panel after inserting a new SIM card.
2. SIM card not included. Please use a valid SIM card that is compatible to the GSM network with
sufficient credit to enable the GSM SMS function of AM2000 Home Alarm System.
3. Please store the AM2000 SIM card number in a safe place and keep as a secret because
AM2000 Home Alarm System can be controlled via SMS operation.
INPUT FOR POWER
SUPPLY
OUTPUT FOR WIRED
SIREN <500MA
OUTPUT FOR
ELECTRONIC LOCK
INPUT FOR
WIRED SENSORS
(NORMAL ZONE)
INPUT FOR
WIRED SENSORS
(24-HOUR ZONE)
POWER ON/OFF
SIM CARD SLOT
4WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000
PROFESSIONAL
SECURITY SYSTEM
Press and hold Record Button for 3 seconds
to record 10 seconds voice message. Or send
SMS to system for calling back to record the
voice messages (Refer to section 2.13). The
Play Voice Memo Button will be flashing in
blue to remind you. Users can touch the center
of circle to listen to the voice memo. The LED
indicator blacks out when the voice is played.
Replay by
touching
it again.
The RFID tag is for disarming the system and
unlocking the electronic door lock (if connected).
You can rename the RFID tags and store a
mobile phone number to send SMS notice
when family members come home and disarm
the system (Refer to section 2.19 and 2.24).
NOTE:
1. Only after SMS No. is stored and the RFID tags SMS
notice is changed (4 RFID tags can be renamed), users
can receive notice SMS once someone disarms the
system by RFID tag.
2. RFID tags only operate when AM2000 alarm panel is
powered by power supply.
2.3 RECORD/PLAY VOICE MEMO
2.4 RFID TAG
2.5 SPEED DIAL
1. Enter alarm panel password (Default:1234).
2. Press Connect Button and button
illuminates.
3. Trigger signal within 15 seconds after
pressing Connect Button .
a. AM2010 PIR Motion Sensor: Press test
button twice.
b. AM2020 Door/Window Contact Sensor:
Break contact by moving magnet away
from sensor.
c. Remote Control: Press any button on the
remote control.
d. RFID Tag: Wave RFID tag near alarm
panel RFID reader.
4. Connection successful when alarm panel
beeps once.
NOTE:
• Ifalarmpanelbeepstwice,accessoryhas
been added before.
• Alarmpanelassignszonessequentially.
The first connected accessory is assigned in
Zone 1, the second one in Zone 2 and
so on.
• Alarmpanelsupportsupto10remote
controls, 50 wireless sensors or sirens and
50 RFID tags.
2.2 CONNECT WIRELESS STROBE SIREN
2.1 CONNECT WIRELESS SENSORS,
REMOTE CONTROLS & RFID TAGS
AM2030 Strobe Siren can be added to
increase alarm visibility and audibility.
1. Open AM2030 siren front cover.
2. Press and hold tamper switch for the entire
pairing setup to avoid false tamper alarm.
3. Connect power supply to AM2030 siren.
4. Disarm AM2000 control panel by keying in
password and pressing Disarm Button .
5. Press and hold AM2030 siren Pairing
Button for 0.5 second.
6. Arm AM2000 control panel by pressing
Arm Button to pair with AM2030 siren.
7. When AM2030 siren beeps once, they are
paired successfully.
8. After pairing, disconnect power supply and
reassemble front cover.
9. AM2030 siren is ready for use and fixed
mounting installation.
When intruder is detected, both AM2000
control panel and AM2030 strobe light siren
will hoot to deter the intruder. The siren will
turn off in 1 minute on factory default setting.
Press Call Button , the panel auto dials
to pre-stored phone number of the host.
Press Call Button again to end phone call
(Refer to section 2.20).
5
WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000
Dial phone number and then press Call Button
to make phone call. Press Call Button
again to end phone call.
When system is disarmed, the output signal
opens electronic lock automatically.
Open back cover, insert SIM card and turn on
alarm panel. Wait until alarm panel acquires
GSM signal. When the GSM signal indicator
flashes every two seconds, network connection
is established.
NOTE: Please check credit on the SIM card
account periodically to ensure the GSM SMS
functionality operates correctly.
Send a text of “?” to the SIM card number,
the operation guide message will be replied.
You can control the alarm system by following
the guide message:
Send:
System replies first grade guide menu:
Send:
System replies second grade guide menu:
Send:
System replies third grade guide menu:
Send:
Send:
0
1
2.6 PHONE CALL
2.9 DISARM
2.10 ARM
2.7 ELECTRONIC LOCK OUTPUT
2.8 SMS OPERATION
6WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000
PROFESSIONAL
SECURITY SYSTEM
Send:
NOTE:
Value of default setting will be changed once users
finish programming.
Alarm panel makes phone calls to stored
phone numbers when alarm is triggered.
Send:
Forward > Edit
00
5
2.14 SETTINGS INQUIRY
2.15 STORE ALARM PHONE NO.
2
3
4
Send:
Send:
Send ‘3’ to the SIM card number, the alarm
will call back. Pick up the phone and start
two-way talk.
Send:
Send ‘4’ to the SIM card number, the alarm
will call back. Pick up the phone, and leave
10 seconds message. The panel will hang up
after 10 seconds.
2.11 STAY ARM (HOME MODE)
2.12 TWO-WAY TALK
2.13 CALL-BACK TO RECORD VOICE MEMO
7
WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000
6
Alarm panel sends SMS notifications to stored
phone numbers when alarm is triggered.
Send:
Forward > Edit
2.16 PHONE REMOTE OPERATION
2.17 RECORD ALARM VOICE MESSAGE
2.18 STORE ALARM SMS NO.
When receiving an alarm call from alarm
panel for an emergency, the alarm system
can be controlled to perform the appropriate
operation.
ACTION OPERATION
Press 1 Arm alarm system
Press 0 Disarm alarm system
Press 9 Turn on siren to deter intruder
Press 6 Turn off siren
Press * Two-way talk between phone
and alarm panel
Press # Replay recorded alarm
voice message
This alarm voice message will be played when
user picks up alarm phone call.
1. Enter alarm panel password (Default:1234).
2. Press Home button , then press
Record button .
3. After the button illuminates, the alarm
panel starts recording for 10 seconds.
4. Communicate an alarm message clearly to
the alarm panel microphone.
5. If the recording is successful, this voice
message will be played upon picking up
an alarm call.
8WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000
PROFESSIONAL
SECURITY SYSTEM
2.23 SMS ALERT FOR TAMPER
ALARM OF ACCESSORIES
2.20
STORE SPEED DIAL PHONE NUMBER
Userscanchangethe1st~9thzonenames.
Thezonenameshouldbe30charactersat
most for each line due to SMS character limit.
OtheralarmzonesarexedasZone10alarm,
Zone 11 alarm and so on.
Send: Code 91 ~ 99
Forward > Edit
(Available for AM2010 only)
SMS will be sent for
1-9zoneswithits
zonenameas“Zone
name + low battery”
SMS alert for 10~50
zoneswillbe“Zone
number + low battery”
(Available for AM2010, AM2020 and AM2030)
SMS will be sent
for1-9zoneswith
itszonenameas
“Zone name +
tamper alarm”
SMS alert for
10~50zoneswill
be “Zone number
+ tamper alarm”
2.21 CHANGE ZONE NAME
2.22 SMS ALERT FOR LOW BATTERY
OF ACCESSORIES
7
8
2.19 STORE SMS NO. FOR RFID TAGS
Alarm panel sends SMS notification to stored
phone number when system is disarmed using
RFID tag.
Send:
Forward > Edit
Alarm panel speed dials stored phone number
when Call Button is pressed.
Send:
Forward > Edit
NOTE:
1 Only after SMS No. is
stored and the RFID
tags SMS notice is changed, users can receive notice SMS once
someone disarms the system by RFID tag.
2. RFID tags only operate when AM2000 alarm panel
is powered by power supply.
91
9
WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000
RFID tags can be associated with users by
assigning names to the tags.
Send
Forward > Edit
NOTE:
Only after SMS No. is stored and the RFID tags SMS notice
is changed, users can receive notice SMS once someone disarms the
system by RFID tag.
Delay time is required when arming or
disarming without the use of remote control
and RFID tag. After pressing Arm Button ,
the alarm panel will change to Armed state
after this delay time. This allows the user to
exit the premises without triggering the alarm.
Alarm will beep every second to remind
user to exit premises. The reminder beep
speeds up in the last 15 seconds. If intruder is
detected, the alarm is delayed based on this
delay time.
10
11
Send:
Forward > Edit
2.24 CHANGE RFID TAGS SMS NOTICE
2.25 ENTRY AND EXIT DELAY TIME
12
Send:
Forward > Edit
2.26 SIREN VOLUME AND RINGING TIME
10 WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000
PROFESSIONAL
SECURITY SYSTEM
Send:
22
2.31 DELETE RFID TAGS BY SMS
Send:
Or press Tamper Switch 3 times within 3 sec.,
accessories will be cleared after two beeps.
21
2.30 DELETE WIRELESS
ACCESSORIES BY SMS
14
0086
0001
When a sensor which is set to Single Zone
Delay mode detects intruder, alarm panel will
only trigger alarm after this delay time.
Send:
Forward > Edit
Send: 0086 to change language to Chinese
Send: 0001 to change language to English
13
Send:
Forward > Edit
2.27 CHANGE DISARM PASSWORD
2.28 SINGLE ZONE DELAY TIME
2.29 CHANGE SYSTEM LANGUAGE
NOTE:
It is recommended to change alarm panel password
immediately after installation.
Inhaltsverzeichnis
Andere Orion Sicherheitssystem Handbücher
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung