1.Charging
Connect the Micro-USB connector of the charging cable to the DC5V input socket
at the rear side of the speaker, and plug the USB connector of the charging cable
to an external USB power supply socket with a minimum supply current of 1A
(recommended charge current is 2A). The external USB power supply can be the
USB adaptor included in the package, the USB socket in your computer/laptop, the
USB adaptor of most cell phone USB chargers with DC5V output, or the 5V USB
port of a power socket etc. When charging, the charge indicator on the charge port
will be on and it will turn off when charging is complete.
2.On/Off
Slide the ON /OFF switch at the rear side to turn on/off the speaker. The speaker
will enter Time Mode after turning on.
3.Volume
Press and hold the“ ” or “ ” button to adjust the volume of the speaker.
4.Bluetooth
Press the “ ” button to enter Bluetooth mode, press the “ ” button again will
exit to Time mode.
Paring – When the speaker is in Bluetooth mode, turn on your Bluetooth device
and search for Bluetooth equipment “S1”, and then pair up with the speaker.
Bluetooth phone call - When paired to your phone, press the “ ” button to
answer incoming calls, press “ ”again to end the call. Hold the “ ” button to
reject the call. Pressing the “ ” button twice will call the last incoming call number.
Note: Microphone is on top of the speaker, please talk into the microphone when
making phone calls.
Track selection– When playing music in Bluetooth mode, press the“ ” or
“ ”button to jump to the previous track or next track.Track selection can also be
done from your Bluetooth device.
5.FM radio
