Orphek Helix 5000 Bedienungsanleitung
English
MAINTENANCE
It is recommended to clean the pumps every 3 months. Check and clean the
impeller, and if necessary soak the pump and impeller in white vinegar to
dissolve any calcium deposits.
WARRANTY POLICY
Orphek warrants this product to the original purchaser against defective
material and workmanship that occurs during normal use of the body for
two years and one year warranty on the pump. Company will, at
company’s option, either repair or replace without charge.
PRODUCTS COVERED BY WARRANTY
All Orphek equipment is covered by warranty from the date of purchase.
Exclusions
Damage resulting from accident, misuse, lack of reasonable care,
subjecting the product to abnormal working condition or any other failure
not resulting from defects in materials or workmanship.
Damage caused by tampering, modification or attempted repair by anyone
other than the company.
Transfer of products to someone other than the original purchaser.
ORPHEK AQUARIUM SUPPLIES
E-mail:[email protected]
Http://www.orphek.com
Orphek Helix 5000
INSTALLATION GUIDE
English
Thank you for choosing Orphek skimmer that provides excellent performance
with maximum safety and reliability.
Model Orphek Helix 5000
Foot Print/Height 370*320*/545mm(14.43”x12.48”/21.25”)
Chamber Diameter 220m (8.58”)
Outlet Diameter 50mm(1.95”)
Air Intake Max 2000 lph
Tank Size 300-2500L (75-640 gallons)
Pump DC OP-5000N
Wattage 40 watts at full rpm (4.0 amps)
Maximum Head Pressure 3.5 meters (11.7”)
Skimmer Installation:
1. Install Reaction Chamber and Baseplate with Sunk Screws. Install
Baseplate and Body with hand screws.
2. Insert Connection Pipe into elbow outlet pipe, insert T Pipe into
Connection Pipe before fix Outlet Regulator, connect Elbow Assembly
with T Pipe finally.
3. Fix Body Sealing Ring inside the neck. Stuff Stopper into the draining pipe
of Collection Cup, Insert Collection Cup into Body, covered with Lid.
4. Put Inlet Sealing Ring into Inlet Pipe and fixed with Water Pump. Insert
Inlet Pipe into Body.
5. Connect Silencer and Air Filling Part with pump inlet and Air Tube.
1. www.orphek.com
English
Part Names
1. Lid
2. Collection Cup
3. Stopper
4. Body Sealing Ring
5. Body
6. Hand Screws
7. Sunk Screws
8. Reaction Chamber
9. Baseplate
10. Water Pump
11. Air Filling Part
12. Air Tube
13. Inlet Sealing Ring
14. Inlet Pipe
15. Silencer
16. Outlet Regulator
17. T Pipe
18. Elbow Assembly
19. Connection Pipe
2. www.orphek.com
Andere Orphek Schwimmbadfilter Handbücher
Beliebte Schwimmbadfilter Handbücher anderer Marken
Davey
Davey EcoPure DEP2140 Bedienungsanleitung
JUWEL Aquarium
JUWEL Aquarium EccoSkim Bedienungsanleitung
POLYGROUP LIMITED
POLYGROUP LIMITED SFS600 Filter System with F600C Pump Bedienungsanleitung
Pentair Pool Products
Pentair Pool Products Filter CFW Series Bedienungsanleitung
Oase
Oase Skimmer 250 Bedienungsanleitung
Oase
Oase CrystalSkim 350 Bedienungsanleitung